Effects of device resolution on three-dimensional integral imaging

We present the effects of a finite number of pixels in elemental images on the resolution and the depth of focus in three-dimensional integral imaging (II). We show that the number of pixels in elemental images determines not only the lateral resolution but also the depth resolution. The minimum number of pixels required in each elemental image is calculated to avoid depth-of-focus degradation. We evaluate how II system performance degrades as the number of pixels in each elemental image changes. The product of the depth of focus and the lateral resolution squared is used as the performance metric.     

Self-dual Chern–Simons Vortices on Bounded Domains

In this Letter we consider the Abelian Chern–Simons vortices on a bounded simply connected domain. We establish the existence of solutions for the self-duality equations. We prove the uniqueness of solutions when all the vortex points are equal and the domain is star-shaped. We also show the radial symmetry of solutions on balls centered at the vortex point.     

Abnormal adsorption behavior of dimethyl disulfide on gold surfaces

Adsorption of dimethyl disulfide (DMDS) on gold colloidal nanoparticle surfaces has been examined to check its binding mechanism. Differently from previous results, DMDS molecules adsorbed on the gold surface at high concentration showed the S–S stretching band at 500 cm⁻¹ in surface-enhanced Raman scattering (SERS) spectra, which indicates the presence of intact adsorption of DMDS molecules. However, it was found that the S–S bond of disulfides was easily cleaved on the gold surface at low concentration. These behaviors were not observed for diethyl disulfide (DEDS) or diphenyl disulfide (DPDS). Our results indicate that DMDS molecules with the shortest alkyl chains on the gold surface can be inserted into self-assembled monolayers (SAMs) without the S–S bond cleavage during self-assembly due to insufficient lateral van der Waals interaction and the low adsorption activity of disulfides, whereas DEDS with longer alkyl chains or DPDS with the weak disulfide bond dissociation energy would not. These unusual DMDS adsorption behaviors were examined by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). We also compared the bonding dissociation energy of the S–S bonds of various disulfides by means of a density functional theory (DFT) calculation.     

Synthesis of nanoparticles and suspensions by pulsed laser ablation of microparticles in liquid

Recent studies demonstrated that the process to produce metal and oxide nanoparticles by laser ablation of consolidated microparticles is a convenient and energy-efficient way to prepare nanoparticles. In this work, the novel process is applied to nanoparticle synthesis in the liquid environment and the results are compared with those by the gas-phase process. Metal and oxide nanoparticles are synthesized by pulsed laser ablation of the compacted metal microparticles using a Q-switched Nd:YAG laser in water. It is shown that the process is effective for preparing nanoparticle suspensions having relatively uniform size distributions. While the laser fluence and the degree of compaction strongly influence the size of the produced nanoparticle in air, the sedimentation time is shown to be the most critical factor to determine the mean size of the suspended particles.     

Evanescent tunneling of an effective surface plasmon excited by convection electrons

We introduce the subwavelength transmission of an effective surface plasmon beyond the light zone via the proximity interaction of convection electrons with a metal grating. A comparative analysis of dielectric homogenization and a finite-difference-time-domain simulation shows that out-of-phase-like modes (pi modes) have strong transmission below the cutoff frequency relying on the parametric condition of structural dimension and electronic energy. The synchronous spatial field and charge distribution of the pi mode system confirms the evanescent tunneling effect of the electron-coupled plasmons.     

Performance limits of pico-cell systems using radio-over-fiber techniques with an electroabsorption modulator

We investigate the performance limits of a pico-cell system using the radio- over-fiber technique with an electroabsorption modulator (EAM) in a 2.4 GHz wireless local area network (WLAN) environment. To understand the performance limits of the system using an EAM as the optical transceiver, we vary the optical modulation index (OMI) of the transmitter for different bias voltages to the EAM. Power margins in the links are found to estimate a possible service range, and packet loss rates (PLRs) in the pico-cell system are measured to evaluate the transmission performance. The total service range can be extended up to 3 m by adjusting the OMI of the transmitter for different applied bias voltages to the EAM.     

Influence of ligands on the photoluminescent properties of Eu in europium β-diketonate/PMMA-doped systems

Three kinds of europium β-diketonates Eu(DBM)₃, Eu(BA)₃ and Eu(TTA)₃ (DBM: Dibenzoylmethane; BA: 1-Benzoylacetone; TTA: Thenoyltrifluoroacetone) were doped in poly(methyl methacrylate) (PMMA) matrix. The doped systems were studied by using photoluminescent (PL) spectroscopy, emission decay experiments and X-ray diffractometry. Eu(III) ions in the doped Eu(DBM)₃/PMMA systems have two distinct symmetric sites and the emission band changes greatly with the compositions. Eu(III) in the Eu(BA)₃/PMMA systems gives only one symmetric site in the doped systems and the emission band changes slightly with the compositions. Although two distinct symmetric sites of Eu(III) can be distinguished in the doped systems of Eu(TTA)₃/PMMA, the two sites have similar ⁵D₀ lifetimes and the luminescent spectra almost do not change with the compositions. XRD reveals that crystallites were formed in the doped Eu(DBM)₃/PMMA systems that have different crystalline structure from that of the chelate, and Eu(BA)₃ and Eu(TTA)₃ exist in amorphous state in the doped systems. The difference between the PL properties and structures of the doped systems for the three kinds of chelates should be attributed to different interactions between the chelate molecules and between the chelate and PMMA.     

Effects of post-annealing on the structural and nanomechanical properties of Ga-doped ZnO thin films deposited on glass substrate by rf-magnetron sputtering

In this study, the effects of post-annealing on the structure, surface morphology and nanomechanical properties of ZnO thin films doped with a nominal concentration of 3 at.% Ga (ZnO:Ga) are investigated using X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM) and nanoindentation techniques. The ZnO:Ga thin films were deposited on the glass substrates at room temperature by radio frequency magnetron sputtering. Results revealed that the as-deposited ZnO:Ga thin films were polycrystalline albeit the low deposition temperature. Post-annealing carried out at 300, 400 and 500 °C, respectively, has resulted in progressive increase in both the average grain size and the surface roughness of the ZnO:Ga thin film, in addition to the improved thin films crystallinity. Moreover, the hardness and Young's modulus of ZnO:Ga thin films are measured by a Berkovich nanoindenter operated with the continuous contact stiffness measurements (CSM) option. The hardness and Young's modulus of ZnO:Ga thin films increased as the annealing temperature increased from 300 to 500 °C, with the best results being obtained at 500 °C.     

An enhanced common path interference optic measurement system for refractive indices and thickness

This study proposes a common path interference optical system for the measurement of refractive indices and thickness of uniaxial crystal material. The measurement system comprises an accurate Mach–Zehnder laser interferometer, a single-axis rotary stepping motor, and a computer. The laser interferometer is composed of a single-frequency He–Ne laser, two-beam splitters and two reflectors. The Mach–Zehnder laser interferometer measures the optical length difference by using its linear measurement accuracy. The proposed solution procedure enables both the refractive indices and the thickness of the optical waveplate to be obtained. The proposed design differs from conventional designs in that it does not use a heterodyne modulator with a lock-in technique. It is shown that the refractive indices and thickness of the tested optical elements can be measured rapidly and accurately.     

Layered perovskites with giant spontaneous polarizations for nonvolatile memories

A series of titanate-based layered perovskites having large values of the spontaneous polarization P(s) were developed for their applcations to nonvolatile ferroelectric random access memories. Among these, the Nd-modified bismuth titanate [Bi(4-x)Nd(x)Ti(3)O(12) (BNdT)] system exhibited the most remarkable ferroelectric properties. The c-axis oriented BNdT capacitor was characterized by a switchable remanent polarization 2P(r) of over 100 microC/cm(2) and imprinting and fatigue-free behavior. The active Ti site responsible for the giant P(s) was identified with the help of Rietveld analysis, x-ray absorption near-edge structure study, and ab initio quantum computations.