Electricity Production and Characterization of High-Strength Industrial Wastewaters in Microbial Fuel Cell

Microbial fuel cells (MFCs) convert electrochemical energy into electrical energy immediately and have a big potential usage for the same time wastewater treatment and energy recovery via electro-active microorganisms. However, MFCs must be efficiently optimized due to its limitations such as high cost and low power production. Finding new materials to increase the cell performance and reduce cost for MFC anodes is mandatory. In the first step of this study, different inoculation sludges such as anaerobic gum industry wastewater, anaerobic brewery wastewater and anaerobic phosphate were tested, and MFC that was set up with anaerobic gum industry wastewater inoculation sludge exhibited the highest performance. In the second step of this study, various wastewaters such as chocolate industry, gum industry and slaughterhouse industry were investigated for anode bacteria sources. Several electrochemical techniques have been employed to elucidate how wastewaters affect the MFCs’ performance. Among all the mentioned wastewaters, the best performance was achieved by the MFCs fed with slaughterhouse wastewater; this device produced a maximum power density of 267 mW·m^?2.     

Enhanced optical absorption in nanopatterned silicon thin films with a nano-cone-hole structure for photovoltaic applications

In this paper, the optical properties of the silicon nano-cone-hole (NCH) structure array are studied. The ultimate efficiency of the optimized NCH array is enhanced by 23.11% compared to an optimized nanohole array of the same thickness. The absorptance enhancement of the NCH arrays is attributed to its lowered reflectance, more supported resonant modes, and enhanced mode interaction. The angular dependence of ultimate efficiency is also investigated.     

Palladium(II)?NHC complexes containing benzimidazole ligand as a catalyst for C?N bond formation

The reaction of 2‐(2‐bromoethyl)‐1,3‐dioxane with 1‐alkylbenzimidazole derivatives results in the formation of the new benzimidazolium salts (1). The reaction of Pd(OAc)₂ with 1,3‐dialkylbenzimidazolium salts (1a–c) yields palladium N‐heterocyclic carbene (NHC) complexes (2a–c). All synthesized compounds were characterized by ¹H NMR, ¹³ C NMR, IR and elemental analysis techniques which support the proposed structures. As catalysts, these new palladium complexes offer a simple and efficient methodology for the synthesis of triarylamines and secondary amines from anilines and amines and in a single step with potassium tertiary butoxide as a base. Copyright © 2010 John Wiley & Sons, Ltd.     

Urea dimethacrylates functionalized with bisphosphonate/bisphosphonic acid for improved dental materials

Incorporation of bisphosphonate/bisphosphonic acid groups in dental monomer structures should increase interaction of these monomers with dental tissue as these groups have strong affinity for hydroxyapatite. Therefore, new urea dimethacrylates functionalized with bisphosphonate (1a, 1b) and bisphosphonic acid (2a, 2b) groups are synthesized and evaluated for dental applications. Monomers 1a and 1b are synthesized from 2‐isocyanatoethyl methacrylate (IEM) and two bisphosphonated amines (BPA1 and BPA2), prepared as reported elsewhere. Selective dealkylation of the bisphosphonate ester groups of 1a and 1b using trimethylsilyl bromide (TMSBr) gives monomers (2a and 2b) with bisphosphonic acid functionality. X‐ray diffractometer (XRD), Raman spectroscopy, and X‐ray photoelectron spectroscopy (XPS) analyses of monomer‐treated HAP particles show that 2a induces formation of stable monomer‐calcium salts, similar to 10‐methacryloyloxydecyl dihydrogen phosphate (MDP), with higher chemical interaction than 2b. The photopolymerization studies indicate good copolymerizability with commercial dental monomers. In vitro studies on NIH 3T3 mouse embryonic fibroblast cells have clearly shown that the tested monomers (1b and 2b) are not toxic according to the MTT standards. All these properties make these monomers suitable as biocompatible cross‐linkers/adhesives for dental applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3195–3204     

Asymmetric benzoin reaction catalyzed by benzoylformate decarboxylase

Aromatic aldehydes are converted into benzoins by benzoylformate decarboxylase catalyzed C–C bond formation. The reaction affords (R)-benzoins with high enantiomeric excess and in good chemical yields. A broad range of aromatic aldehydes can be used as substrates in aqueous buffer or buffer/DMSO-solutions.     

Monotonicity of input-output mappings in inverse coefficient and source problems for parabolic equations

This article presents a mathematical analysis of input-output mappings in inverse coefficient and source problems for the linear parabolic equation ut=(kx(x)ux)+F(x,t), (x,t)∈ΩT:=(0,1)×(0,T]. The most experimentally feasible boundary measured data, the Neumann output (flux) data f(t):=−k(0)ux(0,t), is used at the boundary x=0. For each inverse problems structure of the input-output mappings is analyzed based on maximum principle and corresponding adjoint problems. Derived integral identities between the solutions of forward problems and corresponding adjoint problems, permit one to prove the monotonicity and invertibility of the input-output mappings. Some numerical applications are presented.     

Delay equations with fluctuating delay related to the regenerative chatter

The mathematical models representing machine tool chatter dynamics have been cast as differential equations with delay. In this paper, non-linear delay differential equations with periodic delays which model the machine tool chatter with continuously modulated spindle speed are studied. The explicit time-dependent delay terms, due to spindle speed modulation, are replaced by state-dependent delay terms by augmenting the original equations. The augmented system of equations is autonomous and has two pairs of pure imaginary eigenvalues without resonance. The reduced bifurcation equation is obtained by making use of Lyapunov-Schmidt Reduction method. By using the reduced bifurcation equations, the periodic solutions are determined to analyze the tool motion. Analytical results show both modest increase of stability and existence of periodic solutions near the new stability boundary.     

On classification of four-dimensional nilpotent Leibniz algebras

Leibniz algebras are certain generalization of Lie algebras. In this paper, we give the classification of four-dimensional non-Lie nilpotent Leibniz algebras. We use the canonical forms for the congruence classes of matrices of bilinear forms and some other techniques to obtain our result.     

Effects of timber skidding on chemical characteristics of herbaceous cover, forest floor and topsoil on skidroad in an oak (Quercus petrea L.) forest

This paper examines the effects of timber harvesting by skidding on some soil properties (sand, silt, clay, pH, organic carbon, bulk density and compaction), herbaceous cover (unit mass) and forest floor (unit weight) properties. Also N (%), P, K, Na, Ca, Mg, Fe, Zn, Cu and Mn (ppm) were determined in all herbaceous cover, forest floor and two soil depth (0–5 cm and 5–10 cm) on skidroad of an oak (Quercus petrea L.) stand in Istanbul Belgrad Forest – Turkey. In this study, obtained results are; the forest floor and the herbaceous cover amount on the skidroad have been found considerably lower than undisturbed area. There were some crucial changes in the characteristics of the soil which has been investigated down to 10 cm depth. Soil bulk density was found quite high in the samples taken from the skidroad subject to compaction compared to the ones on the undisturbed area. Nevertheless, no important difference had been detected between the skidroad and the undisturbed area at both soil depths in terms of organic carbon contents. Moreover, the soil acidity (pH) values showed noteworthy differences in the analysis of soil samples taken from both soil depths on the skidroad and on the undisturbed area. Fe and Cu contents of herbaceous samples on skidroad were significantly higher than undisturbed area. Forest floor on skidroad had significantly higher K content, and significantly lower Zn, Mn and N content compared to undisturbed area. P, Fe, Zn and Mn contents were found significantly lower in 0–5 cm soil depth on skidroad than undisturbed area. In 5–10 cm soil depth, concentrations of N, P, Fe, Zn and Mn were significantly lower, while Mg and Cu contents were significantly higher than undisturbed area. Results indicate that long-term harvest using skidding techniques on these sites had adversely affected soil cation concentrations, physical soil conditions and mass of herbaceous cover and forest floor.     

Communication: Identification of the molecule-metal bonding geometries of molecular nanowires

Molecular nanowires in which a single molecule bonds chemically to two metal electrodes and forms a stable electrically conducting bridge between them have been studied intensively for more than a decade. However, the experimental determination of the bonding geometry between the molecule and electrodes has remained elusive. Here we demonstrate by means of ab initio calculations that inelastic tunneling spectroscopy (IETS) can determine these geometries. We identify the bonding geometries at the gold-sulfur interfaces of propanedithiolate molecules bridging gold electrodes that give rise to the specific IETS signatures that were observed in recent experiments.