含锆层柱蒙脱石对1,2,4三甲基苯歧化反应的催化作用

用离子共聚法合成了硅锆层柱蒙脱石（ＳｉＺｒＰＩＬＭ）和铁锆层柱蒙脱石（ＦｅＺｒＰＩＬＭ），考察了它们对１，２，４三甲基苯（１，２，４ＴｒＭＢ）歧化反应的催化性能．１，２，４ＴｒＭＢ在催化剂样品上可发生歧化反应和异构化反应，歧化反应选择性达８０％以上．随着催化剂预处理温度的提高，１，２，４ＴｒＭＢ转化率下降，歧化反应选择性和四甲基苯（ＴｅＭＢ）中１，２，４，５ＴｅＭＢ含量则升高．催化剂对１，２，４ＴｒＭＢ歧化反应有择形催化作用，１，２，４，５ＴｅＭＢ和间二甲苯、邻二甲苯为主要产物，并且其含量偏离其热力学平衡组成，ＴｅＭＢ中１，２，４，５ＴｅＭＢ的含量在８５％以上．     

N-取代苯并咪唑和N-取代-2-硫代噻唑烷酮类化合物的质谱研究

本文所研究的7种N-取代苯并咪唑和硫代噻唑烷酮类化合物是一类新合成的具有较高杀菌活性的化合物。本文利用电子轰击质谱技术对表中所列的化合物进行了研究。在高分辨精确质量测量和亚稳离子测定的基础上着重讨论了分子内3、4位C—C键的断裂和与杂环     

A New Efficient Synthesis of p-Nitrocalix[4]arene

A new efficient synthesis of p-nitrocalix[4]arene from calix[4]arene by using nitrogen dioxide is described.The compound is an useful intermediates for the introduction of other functional groups to obtain N containing substituted calix[4]arene.The reaction mechanism is briefly discussed.     

PET-HBT嵌段热致性液晶共聚酯的合成

液晶高分子材料具有相当高的强度和模量，被誉为当代超级工程塑料．以对羟基苯甲酸甲酯、1，4-丁二醇为主要原料，经熔融酯交换合成双-对羟基苯甲酸丁二醇酯(BBHB)；以四氯乙烷为溶剂，采用溶液缩聚法将过量的BBHB与对苯二甲酰氯(TPC)合成端基为BBHB的齐聚物(PHBT)；以对苯二甲酸二甲酯与乙二醇为原料，经熔融酯交换合成对苯二甲酸双β-羟乙酯(BHET)，然后采用溶液缩聚法将BHET与少量的TPC合成端基为TPC的齐聚物(PTET)；最后以PHBT与PTET为原料，以四氯乙烷为溶剂，采用溶液缩聚法合成目标共聚酯(PET-HBT)。研究了共聚酯的双折射现象及热行为；用偏光显微镜观察了试共聚酯的织态结构并用FTIR表征了共聚酯的微观结构．     

A novel three-component reaction for the synthesis of new 4-azafluorenone derivatives

Reaction of arylidenemalononitriles, 1,3-indanedione, and mercaptoacetic acid or 4-methylbenzenethiol is successfully carried out using microwave heating. It is an efficient and promising synthetic strategy to build the indenopyridine skeleton.     

9-羟基-芴-9-羧酸双核铜配合物[Cu(C_(14)H_8O_3)(C_9H_7N)(C_2H_5OH)]_2的合成、晶体结构及热稳定性研究

在自然界中,α-羟基羧酸广泛的存在于动植物体内,在羧酸循环、碳水化合物代谢和氨基酸的合成中起到重要的作用。Tapscott等详细总结了有关羟基羧酸及其金属配合物的合成化学[1]。芴的9位上2个氢原子被羟基和羧基取代可生成9-羟基-芴-9-羧酸(简称芴酸),它是α-羟基乙酸的衍生物,是一种具有生理活性的植物生长整形素,它能够延缓植株生长,影响植株根的向地性和茎的向光性[2]。由于芴酸含有羟基和羧基两种不同的氧配位原子,使其又可以作为一种潜在的构筑配合物的组织基元。目前有关芴酸与金属离子的合成与结构化学研究相对较少,仅见铜、镉的单…     

胶束溶液中高氯酸二水(四胺)合钴(Ⅲ)配合物催化磷酸二酯水解的研究

本文合成了疏水性高氯酸二水（四胺）合钴（Ⅲ）配合物，研究了它与非离子表面活性剂Brij35形成的金属2胶束催化二（对硝基苯酚）磷酸二酯水解的动力学及其机理。结果表明此金属胶束对磷酸二酯水解的速率大约提高10^4倍，这主要是由于表面活性剂胶束的pH效应和浓聚效应所致，暗示着顺式二水类配合物形成的金属胶束是一个潜在的磷酸二酯水解剪切的催化剂。     

MgFe2O4-Fe2O3纳米粉体的软化学合成及电磁学特性

Nano-MgFe₂O₄-Fe₂O₃ magnetic powders were synthesized by citrate gel under microwave irradiation. The structure，particle size distribution，electromagnetic characteristics of nano-MgFe₂O₄-Fe₂O₃ were characterized by using TG-DTA, X-ray, electronic microscope, nano-size measurement and electromagnetism measurement apparatus。The results show that the product is a mixture of MgFe₂O₄ and Fe₂O₃ with average size of 44 nm, tanδ for the product is 0.265 and 0.610 at frequency of 1.0 GHz and 1.8 GHz respectively.     

Single crystal tin nano-rod arrays electrodeposited by a soft template

Single crystal tin nano-rod arrays were fabricated by the electrodeposition method when amphiphilic triblock copolymer P123 was used as a soft template at a concentration much lower than that for forming a liquid crystalline phase.     

Highly visible-light luminescence properties of the carboxyl-functionalized short and ultrashort MWNTs

Luminescence of the short multiwalled carbon nanotubes (MWNTs) conjugated with carboxylic acid groups has been studied. The results show that the carboxyl-functionalized short MWNTs could emit luminescence and the emission peak appears at 500 nm with a corresponding optimal excitation wavelength centering at 310 nm. When the short MWNTs are filtered through 0.15 μm polytetrafluoroethylene (PTFE) membrane, the ultrashort MWNTs are obtained from the filtrate. An interesting feature for the ultrashort MWNTs is that the emission intensity is strengthened and the peak is slightly blue shifted to 460 nm. This result indicates that the luminescence properties of MWNTs are strongly affected by the tube length. After chemical oxidization cutting, defects and carboxylic acid groups at the tube end and/or sidewall can be produced; the more shorten of MWNTs, the better dispersion and carboxylic passivation of the nanotubes, and the more intense luminescence emissions. The broad emissions are logically attributed to the trapping of excitation energy by defect sites in the carboxyl-functionalized nanotube structure.