Self-cleaning Anti-fouling TiO2/Poly(aryl ether sulfone) Composite Ultrafiltration Membranes

A series of novel TiO2/poly(aryl ether sulfone) ultrafiltration membranes with anti-fouling and self-cleaning properties was designed and prepared. First, anti-photocatalytic degraded fluorine contained polv(aryl ether sulfone) matrix(PAES-F) was synthesized. Then the composite membranes were prepared via TiO2 nanopartides and PAES-F polymer matrix by solution blending and non-solvent induced phase inversion methods. Further, separation efficiency, fouling behavior and self-cleaning property of the composite ultrafiltration(UF) membranes were investigated by dead-end filtration experiments using a polyacn lamide solution. The composite UF membranes exhibited outstanding self-cleaning efficiency and anti-photocatalytic degraded property after exposure to simulated sunliglit irradiation.The water flux recovery ratios(FRR)of the optimal composite UF membranes could reach 74.24%, which was attributable to photocatalytic degradation of the organic contaminant by TiO2. And the retention rates of the composite UF membranes could maintain over 97%, which indicated the excellent photocatalytic degradation resistance of the fluorine contained PAES-F matrix. The novel high perfomiance composite UF membranes have a broad application prospect in water treatment.     

红外用CVD ZnS多晶材料的研制

论述了制备红外用CVD ZnS多晶材料的化学气相沉积工艺和热等静压处理工艺。针对CVD ZnS多晶材料具备优良的光学和力学性能,采用化学气相沉积工艺和热等静压处理技术成功研制出大尺寸多晶材料,其最大尺寸达到250mm×15mm。测试了CVD ZnS样品的各项光学、力学性能指标。样品的全波段透过率均接近ZnS材料的本征水平,折射指数均匀性优于2×10^-5,在1.06μm的吸收系数为2×10^-3cm^-1,抗弯强度达到104MPa。     

Morphology Control of SrCO3 Crystals using Complexons as Modifiers in the Ethanol-water mixtures

Using SrC12-6H2O and Na2CO3 as the main raw materials and adding different complexons as modifiers with simple co-precipitation method, SrCO3 crystals with distinct morphologies like spherical, bundle-like, overlapping plate-like, hexagonal star-like, dumbbell-like, etc. can be synthesized in the ethanol-water mixtures. The samples were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and Fourier transform infrared spectrograph （FT-IR）. The interrelated effect mechanism is presented in the end. Results show that the modifier carboxyl groups play a significant role in controlling the SrCO3 crystal morphologies, which can alter the crystal growth unit （Sr^2＋） supply mode and induce the crystal formation with the morphologies matching their spatial configurations.     

共轭聚合物发光和光伏材料研究进展

聚合物光电功能材料与器件因其广阔的应用前景,1990年以年来吸引了世界各国学术界的广泛关注和兴趣.聚合物光电子器件主要包括聚合物电致发光二极管、聚合物场效应晶体管和聚合物太阳能电池等,其使用的关键材料是共轭聚合物光电子材料,包括共轭聚合物发光材料、场效应晶体管材料和光伏材料等.本文主要对共轭聚合物电致发光材料和光伏材料的研究进展进行综述,介绍了这些聚合物材料的种类、结构和性质以及在聚合物电致发光器件和聚合物太阳能电池中的应用.并讨论了当前共轭聚合物光电子材料中的关键科学问题和今后的发展方向.     

一维链状镉(Ⅱ)配位聚合物{[Cd(PAc)2(4，4′-bipy)(H2O)]·4H2O}n的合成、晶体结构及热稳定性研究

A novel one-dimensional coordination polymer, {[Cd(PAc)₂(4,4-bipy)(H₂O)]·4H₂O}_n (HPAc=phenyl acetic acid, 4,4′-bipy=4,4′-bipyridine) was synthesized and characterized by element analysis, IR, TG and X-ray single diffraction crystal structure determination. It crystallizes in the monoclinic space group C2/c with a=2.088 5(4) nm, b=0.839 05(17) nm, c=1.683 5(3) nm, β=105.45(3)° and V=2.843 5(10) nm³, Z=4, M_r=628.94, F(000)=1 288, μ=0.820 mm^-1, R=0.019 9, wR=0.056 5. Each cadmium(Ⅱ) atom is seven-coordinated by four oxygen atoms from two different phenyl acetate groups and two nitrogen atoms from two 4,4′-pyridine ligands and one water molecule, forming a distorted pentagonal bipyramid coordination geometry. Adjacent cadmium(Ⅱ) atoms are bridged by 4,4′-pyridine ligand, constructing a infinite chain along the diagonal direction of ac plane. The Cd…Cd separation within the polymer is 1.164 6(4) nm. The three-dimensional supramolecular structures of the title complexes are constructed by hydrogen bonding interactions and π-π stacking interactions between the benzene rings of HPAc and 4,4′-bipy. CCDC: 616697.     

二维层状铜(Ⅱ)配位聚合物[Cu(PAc)2(μ-3-PyOH)2]n的合成、晶体结构及热稳定性研究

A two-dimensional coordination polymer, [Cu(PAc)₂(μ-3-PyOH)₂]_n(HPAc=phenyl acetic acid, 3-PyOH=3-hydroxypyridine) was synthesized and characterized by the element analysis, IR, TG and X-ray diffraction single crystal structure determination. The title complex crystallizes in the monoclinic system with space group P2₁/c, a=1.228 7(3) nm, b=0.967 05(19) nm, c=1.076 4(2) nm, β=109.93(3)° and V=1.202 4(5) nm³, Z=2, M_r=524.01, F(000)=542, μ=0.953 mm^-1, R=0.030 9, wR=0.080 7. Each copper(Ⅱ) ion displays an elongated octahedron with two nitrogen atoms from two different 3-PyOH ligands and two oxygen atoms from two different terminal phenyl acetate groups occupying the basal positions and two oxygen atoms of two different 3-PyOH ligands from the neighbouring molecules occupying the axial positions. Each four identical mononuclear Cu(Ⅱ) unit in the two-dimensional layer is joined by four 3-PyOH ligands, related by inversion centers with a Cu…Cu separation of 0.723 5(10) nm across the 3-PyOH-N,O bridge in bc plane. CCDC: 664483.     

固定漆酶聚苯胺-CoC2O4纳米复合物修饰电极的直接电化学

采用循环伏安法、微分脉冲伏安法、交流阻抗谱以及计时电流法等电化学方法,结合红外光谱、紫外-可见分光光度法、原子力显微镜、透射电子显微镜以及原子吸收光谱等辅助手段,表征了固定漆酶的聚苯胺-草酸钴纳米复合物的化学组成、结构和形貌,测试了纳米复合物固酶前后的导电性能的变化,研究了纳米复合物修饰电极上固定漆酶的直接电化学行为,评估了该电极的催化氧还原效能以及作为电化学传感器检测氧分子的性能。实验结果表明该电极在不含电子介体的溶液中以酶活性中心T2作为首要电子受体,将得到电子传递给化学吸附的氧气使其被电还原,其表观电子迁移速率为0.017 s~(-1),且具有良好的催化氧还原性能(氧还原起始电位:460 m V vs NHE,转化氧分子为水的表观速率常数为2.6×10-4 s~(-1)),酶电催化氧还原为水分子步骤为反应的速控步。该电极作为电化学传感器对氧具有极低检测限(0.20μmol·L~(-1)),宽线性响应范围(0.4~7.5μmol·L~(-1))以及对底物高亲和力(KM=122.4μmol·L~(-1))等优势。     

(Pr0.9La0.1)2(Ni0.74Cu0.21Ga0.05)O4+δ-Ce0.9Gd0.1O2-δ复合阴极的制备及电化学性质

采用EDTA-柠檬酸盐法制备了(Pr0.9La0.1)2(Ni0.74Cu0.21Ga0.05)O4+δ(PLNCG),并与Ce0.9Gd0.1O2-δ(CGO)形成复合阴极PLNCG-CGO。XRD和SEM分析结果表明PLNCG与CGO在1 000℃具有较好的化学相容性。电化学阻抗测试结果表明PLNCG-30%CGO复合阴极在700℃的极化电阻为0.092Ω·cm2;过电位为39.3 m V时,电流密度达到113.3 m A·cm-2。氧分压分析表明电极反应的速率控制步骤为电荷转移过程。阳极支撑单电池(Ni-CGO/CGO/PLNCG-30%CGO)在700℃的最大输出功率密度达到569 m W·cm-2,开路电压(OCV)为0.76 V。     

高温高压下纳米金刚石粉的特性研究

 研究了炸药爆轰合成的纳米金刚石粉在高温（约1 600 K）、高压（5.2 GPa）条件下的行为。将纳米金刚石粉与粉末合金（Ni₇₀Mn₂₅Co₅、100^#）混合、压制成圆片,与合金片 （Ni₇₀Mn₂₅Co₅）和人造石墨片一起交替放入高温高压合成腔体内,进行高温高压实验。实验结果表明：在高温高压条件下,纳米金刚石粉不能长大,反而石墨化了;在相同的高压和保温时间条件下,随着温度的降低,纳米金刚石粉的石墨化程度减弱,纳米金刚石粉的纳米颗粒长大,可长成0.1 mm尺寸的金刚石颗粒（温度为1 070 K左右）。而在此条件下,人造石墨不能合成金刚石,一般金刚石晶体要变成石墨相。这进一步表明,纳米金刚石颗粒表面的活性使得它可以在较低的温度下长成较大颗粒的金刚石。