微流控纸芯片的加工及其分析应用的实验设计*

设计了一个使用喷墨打印法加工微流控纸芯片的实验,在经烷基烯酮二聚体(AKD)的正己烷溶液浸泡过的滤纸上,以三乙醇胺溶液为打印墨水,用喷墨打印机打印出设计好的芯片图案。滤纸加热后,打印区域呈现亲水性,非打印区域为疏水性,从而制备出纸芯片,用该纸芯片通过数字比色法实现了亚硝酸根离子的定量测定。该实验不使用昂贵仪器设备,易普及。通过实验,促使学生了解微流控芯片这一前沿科学技术,锻炼学生细致、灵巧的动手能力,激发学生科技创新活力。     

离子交换纤维吸附去除As(Ⅲ)

制备了一种新型的离子交换纤维RPFA-I,用于去除水体中亚砷酸根离子的研究.在研究的范围内,Fre-undlich型吸附等温方程能够很好地描述等温吸附平衡数据;吸附动力学数据符合Lagergren二级速度方程;pH=6.22时,吸附量达到最大;用0.1mol/L的NaOH溶液可以实现纤维的再生,再生性能优良.     

砷配合物的固相合成、表征及抑菌活性研究

一些砷、锑的配合物具有抗癌、杀菌等生物功能[1,2],可用于药物研究.近年来,用砷剂(主要是三氧化二砷)治疗急性早幼粒细胞白血病(APL),具有缓解率高而复发率低的优点,引起世人的关注.因砒霜中仅含氧和砷,起药物作用的实际是砷(Ⅲ).因此,选择有生物功能的配体合成新型砷配合物对治疗白血病可能有一定药物作用.由于砷的无机盐易水解,故合成砷的生物配合物很困难,对砷配合物的研究也很少报道 [3-7].本文用异烟肼、L-苯丙氨酸和三碘化砷通过室温固相反应合成了两种未见报道的砷配合物,经元素分析,紫外光谱,X-射线粉末衍射,中、远红外光谱和热重差热分析确定了配合物的化学组成,并对配合物的抑菌活性进行了研究.     

低温湿固相反应凝胶法制备纳米γ-Fe2O3的研究

γ-Fe2O3纳米粒子因其在磁性、催化、气敏、生物医学等领域的广泛应用而备受青睐[1].传统制备γ-Fe2O3粒子的方法是在适当温度下加热α-FeOOH或γ-FeOOH,所得粒子粒径在微米级[2].     

HL-2M装置真空室预装阶段检漏试验

通过在加工现场和安装现场搭建的真空辅助系统、四极质谱计及氦检漏仪组成的检漏系统,运用残余气体分析和氦质谱检漏方法在冷态下对HL-2M真空室扇形段及真空室整体进行了真空检漏试验.对漏点进行修复后,测试了真空室的极限真空度和总漏气率等.真空室经过72h的抽气后,真空度达到3.7×10?5Pa,超过了1.0×10?4Pa的预...     

光引发甲基丙烯酸聚合改性羟基磷灰石表面的研究

羟基磷灰石(HPA)具有良好的生物相容性和生物活性,被认为是最有前途的陶瓷人工齿和人工骨置换材料。然而,纯HAP的力学性能比较差,断裂韧性(KIC)不超过1.0MPa.m1/2(自然骨为2-12MPa.m1/2)[1],作为人工种植体其使用可靠性较差。这大大限制了它在承载部位骨替换中的应用。为了改善     

Synthesis and Structure of a Manganese(Ⅱ) Complex: [Mn2·(dinitrobenzoic acid)4·(1,10-phen)2]n

The title compound, [Mn2·(dinitrobenzoic acid)4·(1,10-phen)2]n, has a linear chain structure containing binuclear [Mn2·(dinitrobenzoic acid)4(1,10-phen)2] repeat units. It crystallizes in the triclinic system, space group P1- with a = 7.9261(8), b = 12.1329(15), c = 14.847(2)(A), α = 103.845(5), β =101.424(5), γ= 92.618(4)°, Mr= 657.37, V= 1352.3(2) (A)3, Z = 2, Dc= 1.614 g/cm3, F(000) = 666, μ =0.567 mm-1, the final R = 0.0407 and wR = 0.1015 for 4081 observed reflections with I ＞ 2σ(Ⅰ). The Mn atom is six-coordinated by two N and four O atoms, forming a slightly distorted octahedral geometry. All Mn-O and Mn-N bond distances range from 2.093(2) to 2.310(2)(A). Two adjacent octahedral units are bridged together by two pairs of bi-monodentate carboxyl groups of different dinitrobenzoic acids to form an eight-membered ring with chair-typed configuration, thus generating a one-dimensional chain along the a axis.     

Evolution of Er^3＋ Distribution in the Oxyfluoride Glass Ceramics with Heating

The distribution characteristics of Er3+ ions doped in the oxyfluoride glass ceramics containing LaF3 nanocrystals heat-treated at 650 ℃ for different durations were investigated. The results of the integral absorption cross-section analysis demonstrated that the partition fraction of Er3+ in LaF3 nanocrystals increases with prolonging of heating time. The anomalous phenomena of Er3+ emissions in the up-and the down-conversion fluorescence spectra are well explained based on the calculated results.     

Synthesis, Structure and Optical Properties of Cerium(Ⅲ) Triphosphate CeP3O9

The single crystal and crystallized powder of triphosphate CeP3O9 have been synthesized, and the space group of CeP3O9 has been determined to be C2221 with the cell parameters ofa = 8.6059, b = 11.2437, c = 7.3518 (A), V= 711.4(3) (A)3, Z= 4, Dc = 3.520 g/cm3, F(000) = 700,R = 0.0377 and wR = 0.0930. The absorption and emission spectra have been measured, for which the strongest absorption and emission peaks are located at 280 and 320 nm, respectively. The density of state (DOS) and dielectric function have been calculated by the DFT method. The crystal is transparent provided the wavelength is larger than 341 nm, and the observed ultraviolet cut-off edge is at about 350 nm for a polycrystalline power sample. It is possible that the triphosphate CeP3O9 will become an ultraviolet emission material.