Boron-doped Covalent Triazine Framework for Efficient CO2 Electroreduction

Converting CO₂ into chemicals with electricity generated by renewable energy is a promising way to achieve the goal of carbon neutrality. Carbon-based materials have the advantages of low cost, wide sources and environmental friendliness. In this work, we prepared a series of boron-doped covalent triazine frameworks and found that boron doping can significantly improve the CO selectivity up to 91.2% in the CO₂ electroreduction reactions(CO₂RR). The effect of different doping ratios on the activity by adjusting the proportion of doped atoms was systematically investigated. This work proves that the doping modification of non-metallic materials is a very effective way to improve their activity, and also lays a foundation for the study of other element doping in the coming future.     

水泥土搅拌桩复合地基承载力公式中折减系数β取值的分析

水泥土搅拌桩复合地基承载力设计公式中的桩间土承载力折减系数 β值需根据经验确定,且取值范围较大。因此,要准确计算出复合地基承载力有一定难度。本文根据桩土共同作用机理,探讨了折减系数 β的各种影响因素。在比较研究了一些典型工程静载试验的实测资料之后,对系数 β的取值作了具体分析并给出了合理的建议值。     

高效组合型 Pd/C 催化剂用于 Suzuki 偶联反应

 采用有机金属 Pd2(dba)3 (dba 为二亚苄基丙酮) 还原分解法制得均匀分布的 Pd 纳米颗粒 (粒径为 3~6 nm) 混合液, 并用活性炭直接吸附得到了组合型 Pd/C 纳米催化剂. 采用透射电子显微镜、X 射线光电子能谱和 X 射线衍射等手段测定了催化剂表面 Pd 颗粒大小分布、晶型和化学态等. 将该催化剂用于 Suzuki 碳-碳偶联反应, 其催化活性比浸渍法制备的 Pd/C 催化剂高 2 倍以上. 以溴代芳烃为底物时, 在 80 oC 下 0.5 h 后偶联产物收率可达 98% 以上. 以邻氯硝基苯为底物时, 在 110 oC 下 1 h 后偶联产物收率可达 64%; 延长反应时间, 产物收率可达 90% 以上.     

苯乙烯-甲基丙烯酸羟基乙酯共聚物微球固载金属卟啉催化剂的制备及其催化性能

 将酰氯化的羧基金属卟啉 (MP) 与表面含羟基的苯乙烯-甲基丙烯酸羟基乙酯共聚物微球 (P(St-co-HEMA)) 进行酯化反应, 制备了共聚物微球固载的金属卟啉催化剂 (P(St-co-HEMA)MP). 采用扫描电镜、紫外-可见光谱、红外光谱和热重等手段对微球进行了表征, 并考察了它在“金属卟啉?抗坏血酸?分子氧”体系中催化环己烷羟化反应性能. 结果表明, 共聚物微球固载的金属卟啉比非固载的金属卟啉具有更高的催化活性, 催化剂重复使用 4 次, 仍保持较高催化活性. 各共聚物微球固载的金属卟啉催化活性顺序为 P(St-co-HEMA)FeP > P(St-co-HEMA)MnP > P(St-co-HEMA)CoP.     

固体多核 NMR 研究 Mo/Hβ-Al2O3 催化剂在烯烃歧化反应中的积炭

 采用固体多核 13C, 27Al 及 29Si MAS NMR 结合吸附气体 Xe 后的 129Xe NMR, 详细研究了乙烯和 2-丁烯歧化生成丙烯反应过程中 6%Mo/Hβ-Al2O3 催化剂上积炭的类型和落位. 结果表明, 积炭以饱和烷烃为主, 并随着反应的进行生成更多的支链烷烃, 积炭主要分布在 Hβ 分子筛上, 并主要落位在分子筛的交叉孔道处.     

介孔碳担载的 Co-Mo 和 Ni-Mo 加氢脱硫催化剂

 自制介孔碳 (CMC) 具有比传统活性碳 (AC) 更大的比表面积、孔径和孔体积, 以其为载体, 在浸渍液中加入螯合剂, 采用等量浸渍法制备了 Co-Mo/CMC 和 Ni-Mo/CMC 催化剂, 分别用于模型汽油和柴油加氢脱硫反应. 结果表明, Co-Mo/CMC 和 Ni-Mo/CMC 催化剂具有比 Co-Mo/AC 催化剂更好的织构性质和加氢脱硫活性. 在模型汽油的加氢脱硫反应中, Co-Mo/CMC 催化剂活性比工业催化剂 Co-Mo/Al2O3 高得多; 而在模型柴油的加氢脱硫反应中, Ni-Mo/CMC 催化剂活性也比工业催化剂 FH-98 高得多.     

Growth and Spectral Characteristics of Yb3＋-doped LiGd（MoO4）2 Crystal

The Yb3+-doped LiGd(MoO4)2 crystal with the size up to Φ20×30 mm3 has been grown by Czochralski technique.The polarized room temperature absorption and emission spectra have been investigated.This crystal exhibits a broad absorption band centered at 975 nm with an FWHM of 43 and 59 nm for π-and σ-polarization,respectively,and the corresponding maximal absorption cross-sections are 3.36 and 2.42×10-20 cm2.The emission broadband has an FWHM of 47 and 54 nm for π-and σ-polarization,respectively,with the corresponding emission cross sections of 3.92 and 3.34 × 10-20 cm2 at 1020 nm.The measured fluorescence lifetime is 287 μs.     

Syntheses, Crystal Structures and Characterization of Two New Cadmium（II） Arsonates

Two cadmium arsonate coordination polymers, Cd(HL1)2 (1, H2L1 = 4-aminophenylarsonatic acid) and Cd(H2L2)2·2H2O (2, H3L2 = 2-(4-arsonphenylamino)acetic acid), have been synthesized and characterized by IR and single-crystal X-ray diffraction. Crystal data for 1: triclinic, space group P1 with a = 5.7559(12), b = 7.0903(14), c = 8.9925(18), α = 89.04(3), β = 80.79(3), γ = 85.09(3)o, Dc = 2.496 g·cm-3, μ = 6.095 mm-1, F(000) = 260, Z = 1, the final R = 0.0574 and wR = 0.1376 for 1489 observed reflections with I > 2σ(I). And those for 2: monoclinic, space group P21/c with a = 4.7595(10), b = 9.925(2), c = 22.609(5), β = 91.81(3)°, Dc = 2.167 g·cm-3, μ = 4.168 mm-1, F(000) = 684, Z = 2, the final R = 0.0335 and wR = 0.0815 for 2340 observed reflections with I > 2σ(I). The structure of 1 shows a two-dimensional layer consisting of inorganic chains of {CdN2(AsO3)2} along the a axis linking with the phenyl groups. These layers are further linked through strong interlayer hydrogen bonding interaction to form a three-dimensional hydrogen bond supramolecular architecture. Compound 2 has inorganic chains of {CdO2(AsO3)2} similar to 1, which connect with four adjacent inorganic chains forming a three-dimensional framework.     

Crystal Structure of a Mn(Ⅱ) Coordination Polymer:[Mn(TP)(TBZH)_(2n)(TBZH=Thiabendazole,TP=Terephthalic Acid)

The structure of a manganese(Ⅱ) polymer,[Mn(TP)(TBZH)]2n 1(TBZH=thiabendazole,TP=terephthalic acid),has been determined by X-ray crystallography and characterized by elemental analysis,IR spectrum and thermogravimetric analysis.It crystallizes in the orthorhombic system,space group Pbcn with a=12.7813(12),b=10.7544(10),c=20.1270(19) ,V=2766.6(4)3,Z=8,C14H9Mn0.50N3O2S,Mr=310.77,Dc=1.492g/cm3,F(000)=1268,μ=0.674 mm-1 and S=1.064.The 1-D chain architecture of 1 is constructed from terephthalic acid and manganese atoms.Hydrogen bonds and aryl ring π-π stacking interactions in 1 contribute to form a 3-D supramo-lecular structure.     

Synthesis,Crystal Structure,Vibrational Spectroscopy,and Thermal Behavior of Y[B_2O_3（OH）]_3

The hydroxy yttrium hexaborate,Y[B2O3(OH)]3,has been synthesized under mild hydrothermal conditions at 458 K.The crystal structure was solved and refined from single-crystal X-ray diffraction.It adopts a trigonal space group R3c(No.161) with a = 8.3942(4),c = 20.6484(12) ,V = 1260.03(12) 3,YB6H3O12,Mr = 348.79,Z = 6,Dc = 2.758 g/cm3,F(000) = 1008,μ = 7.015 mm-1,R = 0.0321 and wR = 0.0772.Its crystal structure is made up of six-membered rings,alternating three-connected [BO3(OH)] tetrahedra and planar [BO3] trigonal groups,which are interconnected with each other by sharing their common oxygen corners to form a three-dimensional framework structure with six-membered ring channels that are occupied by the yttrium atoms and run along the c axis.FT-IR,Raman,and TG-DTA results are also presented.