基于石墨烯和金纳米笼修饰的无标记型微囊藻毒素免疫传感器的研制

利用石墨烯及中空结构的金纳米笼构建了无标记型电化学免疫传感器,并用于微囊藻毒素的检测。利用多元醇还原法合成制备了导电性好、催化性强、生物相容性好的金纳米笼;再利用高分散的石墨烯将其固定于玻碳电极表面,进一步吸附固定微囊藻毒素抗体。在无微囊藻毒素存在时,电化学探针[Fe(CN)6]3!/4!在传感器界面上能获得较高的电流响应信号。当培育了微囊藻毒素后,抗体与微囊藻毒素形成免疫结合物,增加了电极表面的电荷密度和传质阻力,阻碍[Fe(CN)6]3!/4!扩散到电极表面,导致[Fe(CN)6]3!/4!的电流响应信号明显降低,电流减小的程度间接地与微囊藻毒素的浓度成比例,可实现对微囊藻毒素的检测。实验考察了抗原培育时间,抗体浓度等条件对该传感器响应性能的影响。结果表明,此传感器对微囊藻毒素的线性响应范围为0.05~1000μg/L,检出限为0.017μg/L,优于文献报道。此传感器操作简单,并且具有良好的稳定性,将其用于实际水样中微囊藻毒素的检测,平均加标回收率为94.1%。     

Synthesis and Crystal Structure of a New Pr(Ⅲ)–K(Ⅰ) Heterometallic Oxalate Coordination Polymer

A new 3D heterometallic coordination polymer, namely [K2Pr2(C2O4)4·H2O]n(1), has been successfully synthesized under hydrothermal conditions. X-ray single-crystal diffraction determination reveals that 1 crystallizes in monoclinic system, space group P21/n with a = 12.060(4), b = 8.493(3), c = 15.776(5)(A), β = 93.235(3)°, V = 1613.4(9) 3, Z = 4, Mr = 730.12, Dc = 3.006 Mg/m3, μ = 6.581 mm-1, F(000) = 1368, the final R = 0.0283 and w R = 0.0866 for 2939 observed reflections with I 2σ(I). Complex 1 features an unusual 3D heterometallic coordination framework, in which oxalates exhibit three different coordination behaviours. Moreover, powder X-ray diffraction and thermal properties for 1 have also been investigated.     

介孔SBA-15棒负载的Pd3Cl催化剂催化Sonogashira偶联反应（英文）

通过静电吸引策略将具有高度分散性的原子精确纳米团簇[Pd3Cl(PPh2)2(PPh3)3]+(Pd3Cl)负载在介孔SBA-15棒上。结构明确的Pd3Cl/SBA-15催化剂在以水作为溶剂以及温和的反应条件下对催化Sonogashira碳-碳偶联反应展现了较好的催化性能以及循环性。在此基础上,我们研究了Pd3Cl团簇结构与性能之间的关系,并证实内核的Pdδ+(0<δ<2)与配体之间的协同效应是催化反应的关键。     

Effects of mechanical loadings on the performance of a piezoelectric hetero-junction

A fully-coupled model for a piezoelectric hetero-junction subjected to a pair of stresses is proposed by discarding the depletion layer approximation. The effect of mechanical loadings on PN junction performance is discussed in detail. Numerical examples are carried out for a p-Si/ZnO-n hetero-junction under a pair of stresses acting on the ntype ZnO portion near the PN interface, where ZnO has the piezoelectric property while Si is not. It is found that the bottom of conduction band is lowered/raised near the two loading points due to the decrease/increase in the electron potential energy there induced by a tensile-stress mode via sucking in majority-carriers from two outside regions, which implies appearance of a potential barrier and a potential well near two loading points. Furthermore, the barrier height and well depth gradually become large with increasing tensile stress such that more and more electrons/holes are inhaled in loading region from the n-/p-zone, respectively. Conversely, rising/dropping of conduction band bottom is brought out near the two loading points by a compressive-stress mode due to the increase/decrease in the potential energy of electrons by pumping out the majority-carriers from the loading region to the two outside regions. Therefore, a potential well and a potential barrier are induced near the two loading points, such that more and more electrons/holes are driven away from the loading region to the n-zone/p-zone, respectively, with the increasing compressive stress. These effects are important to tune the carrier recombination rate near the PN interface. Thus, the present study possesses great referential significance to piezotronic devices.     

Snap-through path in a bistable dielectric elastomer actuator

The dielectric elastomer (DE) has attracted significant attention due to its desired features, including large deformation, fast response, and high energy density. However, for a DE actuator (DEA) utilizing a snap-through deformation mode, most existing theoretical models fail to predict its deformation path. This paper develops a new finite element method (FEM) based on the three-parameter Gent-Gent model suitable for capturing strain-stiffening behaviors. The simulation results are verified by experiments, indicating that the FEM can accurately characterize the snap-through path of a DE. The method proposed in this paper provides theoretical guidance and inspiration for designing and applying DEs and bistable electroactive actuators.     

圆偏振飞秒激光脉冲与低压氙气体靶相互作用软X射线辐射实验研究

利用平场光栅谱仪,分别在2和3 kPa的低气压下,测量了脉宽35 fs的圆偏振超强超短激光脉冲与5 mm长氙气体靶相互作用产生的波长在5～60 nm范围内的离子谱线。2 kPa时最强的跃迁为XeⅧ：4d105s(2S_1/2)—4d95s5p(2P_3/2)的17.085 6 nm线,3 kPa时最强的跃迁为11.343 nm的XeⅦ 4d105s2(1S0)—4d95s25f(3P₁)跃迁。两种气压下,Xe均被电离到XeⅦ,XeⅧ,XeⅨ态。     

自由活塞斯特林发动机活塞位移测量

自由活塞斯特林发动机活塞往复振动位移对研究发动机特性具有重要意义,然而该类发动机活塞位于高压封闭腔体内且结构较为紧凑,其活塞往复振动位移难于直接进行测量。加速度传感器具有尺寸小、安装方便和工作稳定等特点,提出了采用加速度传感器测量活塞位移的方法。根据加速度传感器测量位移的原理,建立了一套加速度传感器测量自由活塞斯特林发动机活塞位移的标定试验系统,以位移传感器为基准测试并分析了不同活塞振幅和不同振动频率下加速度传感器测量位移的误差大小。实验结果表明,在活塞振幅小于8 mm,振动频率大于20 Hz条件下,加速度传感器测量位移的误差小于5%。因此加速度传感器可以用于测量自由活塞斯特林发动机的活塞往复运动位移。最后成功把加速度传感器测量的自由活塞斯特林发动机活塞振动位移用于发动机循环指示功的实验研究。     

一种新型的侧链型聚氨酯高分子钌聚合物的合成

通过分子设计,将带有-OH端基的钌(Ⅱ)联吡啶配合物[Ru(bpy)2L]PF6{L=希夫碱4-[(N甲-基-N羟-乙基)氨基]苯甲醛缩肼基硫代甲酸甲酯}与甲苯-2,4异-氰酸酯、丙烯酸羟乙酯发生共聚合反应,合成了新的侧链型聚氨酯高分子钌聚合物(4)。4的结构经红外光谱和差热分析表征。     

数码摄影中的化学

数码摄影已成为人们日常生活的一部分。在阐明数码摄影原理的基础上,着重介绍了数码相片冲印过程中一些重要的化学反应,以凸显化学在数码摄影中的作用。     

催化链转移聚合制备接枝型两亲共聚物及其溶液性质研究

采用大分子单体法制备接枝型两亲共聚物, 通过表面张力仪、偏光显微镜、旋转流变仪和小角X射线衍射研究了两亲共聚物在水溶液中的聚集行为及其相结构. 首先末端带有可聚合双键的聚甲基丙烯酸叔丁酯大分子单体(PtBMA Macromonomer)通过催化链转移聚合法制备, 所用到的催化链转移剂为二水合双(二氟化硼苯二酮肟)合钴(II) (COPhBF). 然后将所得到的大分子单体与丙烯酸正丁酯(BA)进行自由基共聚得到接枝共聚物PBA-g-PtBMA, PBA-g-PtBMA中PtBMA的侧链部分在酸性条件下定量水解成聚甲基丙烯酸(PMAA)并用NaOH中和得到主链疏水侧链亲水的接枝型两亲共聚物PBA-g-P(MAA^－Na^＋). 用Wilhelmy吊片法研究了不同浓度的两亲共聚物水溶液的表面张力, 发现其行为与小分子表面活性剂不同. 同时用动态光散射法测量了两亲共聚物水溶液中聚集体的粒度, 发现在研究的浓度范围内(0.02～10 g/L)聚集体都存在两个粒度分布峰(约30和300 nm). 浓溶液(w＝37.5%)的偏光显微照片呈现层状液晶的特征图案, 而流变研究表明此时体系具有明显的粘弹性, 说明体系形成了层状液晶. 并且用小角度X射线衍射测定了层状液晶的层间距, 约为12.6 nm.