一种宽能谱多球中子谱仪能量响应的MC模拟

利用蒙特卡罗程序FLUKA模拟计算了聚乙烯慢化球和辅助材料慢化球对低能中子到高能中子的响应函数曲线。结果表明,对纯聚乙烯球来说,随着聚乙烯层厚度的增加,响应曲线峰逐步右移,峰值在高能区有所下降,对20 Me V以上的中子,无论纯聚乙烯球的尺寸有多大,其响应均下降到很低的程度;对辅助材料慢化球来说,中子能量小于1 Me V时,辅助材料慢化球与聚乙烯慢化球的响应曲线相似,但当中子能量大于20 Me V时,中子与辅助材料层发生(n,xn)反应,慢化球的响应呈显著上升趋势。分析计算结果,最终能够确定宽能谱多球中子谱仪的尺寸组合。     

相干态统计特性的弱测量结构研究

理论分析相干态位移参数估计在弱测量方法下的放大效应.引入偏振态作为附属态(Ancilla States),分别进行初选择和后选择,中间的相互作用采用了偏振相关的弱位移操作算符.通过最后检测光子数的分布来估计位移参数;在牺牲检测光子强度的情况下可以有效提高放大效应.     

Synthesis and electrochemical properties of regular hexahedron α-Fe2O3

Synthesis of α-Fe₂O₃ compound with regular hexahedron shape is firstly reported. X-ray diffraction and scan electron microscope are used to characterize the structure and morphology of the prepared sample, respectively. The average edge length of hexahedron is about 0.9 μm. A reaction mechanism has been proposed. The pH value is a crucial factor for the formation and shape of α-Fe₂O₃. Moreover, electrochemical impedance spectroscopy and charge-discharge test of α-Fe₂O₃ as anode material in lithium ion batteries are evaluated. The data indicate that the synthesized regular hexahedron α-Fe₂O₃ can show better electrochemical properties than that of the commercial.     

Construction of the nano-carbon connections among the carbon-coated LiFe0.8Mn0.2PO4 grains by sol-gel technique

Nano-carbon connections among carbon-coated LiFe_0.8Mn_0.2PO₄ grains are successfully constructed using polyacrylic acid and sucrose as carbon sources by sol-gel method, which can improve the electrochemical performance of LiFe_0.8Mn_0.2PO₄. Samples were characterised by X-ray diffraction, scanning electron microscopy and electrochemical tests. The electrochemical tests show LiFe_0.8Mn_0.2PO₄ grains connected by nano-carbon networks obtain the discharge specific capacity of 165 mA h g^?1 at 0.1 C rate and excellent rate capability. Its specific capacity reaches 122 mA h g^?1 at 5 C rate. Its capacity retention at 5 C rate attains 97% cycled 100 cycles. Therefore the construction of nano-carbon networks offers an effective and convenient technique to improve the specific capacities and rate capabilities of electrode materials of low electronic conductivity.     

生长溶液配比对MnTeMoO6晶体形态的影响

采用顶部籽晶溶液法生长Mn Te Mo O6晶体,研究了在不同配比生长溶液中Mn Te Mo O6晶体的实际生长形态,模拟计算了Mn Te Mo O6晶体的理想生长形态,探讨了生长溶液配比对晶体形态的影响,选择的3种生长溶液中Mn Te Mo O6∶Te O2∶Mo O3摩尔比分别为1∶2∶2、1∶3∶2和1∶3∶3。结果表明,在3种配比的生长溶液中Mn Te Mo O6晶体的(110)面具有最大的面网密度和最小的生长速率;生长溶液中Te O2和Mo O3的含量和比例影响了晶体在不同方向的生长速率,从而影响到Mn Te Mo O6晶体的实际生长形态。     

NaCl枝状形貌的制备及生长机理探讨

采用溶剂蒸发法,在不同的条件下分别获得了具有四次对称和二次对称的Na Cl枝晶、"Z"字形枝蔓晶以及主要由枝晶呈放射状分布的球粒晶。借助于X射线衍射仪、光学显微镜、扫描电镜以及电子背散射衍射仪(EBSD),对Na Cl枝状形貌进行了测试分析。结果表明,Na Cl球粒晶主要由主干沿着<111>方向生长的一系列枝晶组成。Na Cl晶体(111)面网由同号离子组成,且钠离子层与氯离子层相间分布,层与层之间的联结力强,且(111)的面网间距最小,是导致Na Cl枝晶优先沿<111>方向生长的主要原因。溶剂的蒸发速度等环境因素的变化对Na Cl枝状形貌的形成具有很大的影响。     

超声法合成CePO4纳米线及发光性能研究

用CeO2作为铈源,采用可重复利用的H3PO4及非模板剂的情况下,用低温超声法成功合成了六方结构的CePO4一维纳米线材料。用X-射线粉末衍射(XRD)、透射电镜(TEM)和荧光分光光度计(FL)测试样品的物相结构、微观形貌、颗粒尺寸和发光性能;并研究超声时间和PO3-4/Ce3+摩尔比对产物的形貌和荧光性能的影响。结果表明:实验所做出的样品全部是六方晶系的结构,形貌都为一维纳米线,其纳米线长50~200nm,宽5~40nm左右;不同超声时间和PO3-4/Ce3+摩尔比的纳米线长径比不同,随超声时间的延长和PO3-4/Ce3+摩尔比增大纳米线出现团聚现象,产物在250~300nm处有宽的激发峰,在378nm处有一个发射峰,是属于Ce3+的5d-4f能级跃迁。     

Physical and chemical studies on cement containing sugarcane molasses

Molasses is generally used as a grinding aid in cement and as a water reducer and retarder in concrete. In China, the output primarily consists of sugarcane molasses. In this paper, the effects of sugarcane molasses on the physical performance and hydration chemistry of conventional Portland cement were investigated. The setting times, the normal consistency of cement pastes, the compressive strengths and fluidities of the mortars were respectively determined according to Chinese Standard GB/T 1346, GB/T17671 and GB/T 2419. The effect of molasses on the hydration kinetics of cement was investigated using a calorimeter. The hydration products and pore size distribution of the cement pastes were analysed by X-ray powder diffraction, differential scanning calorimetry and a mercury injection apparatus. The results show that a small amount of sugarcane molasses retards the setting and hardening of cement paste and increases the fluidity of cement mortar, while excess molasses accelerates the setting and hardening. Molasses improves significantly the compressive strength at 3d due to the decrease of porosity. The addition of 1.0 % molasses accelerates the formation of ettringite, prevents the second hydration of aluminate phase and delays the hydration of C₃S.     

Sponge Phase Producing Porous CeO2 for Catalytic Oxidation of CO

The aggregation behavior of mixtures of the alkaline amino acid L ‐Arginine (L ‐Arg) and bis(2‐ethylhexyl)phosphoric acid (DEHPA) in water was studied in detail. At a fixed L ‐Arg concentration, a phase sequence of micellar phase (L₁ phase), vesicle phase (L_αv phase), planar lamellar phase (L_αl phase), and sponge phase (L₃ phase) was obtained with increasing DEHPA concentration due to changes in the packing parameter. The phase transition of the lamellar structures was determined by freeze‐fracture TEM and ²H NMR spectroscopy. Rheological measurements reflected the phase transition through significant variations of both the elastic modulus and the viscous modulus. Porous CeO₂ materials were produced by utilizing the L₃ phase as template, and the porous CeO₂ exhibited excellent catalytic oxidation activity toward CO due to its high surface area, which provides more active sites for CO conversion.     

Study on the interaction between urea and cellulose by combining solid-state 13C CP/MAS NMR and extended Hückel charges

In this article, solid-state ¹³C CP/MAS NMR combined with extended Hückel charges was applied to investigate the interaction between urea and cellulose in the NaOH/urea aqueous solvent system. Direct experimental evidence was provided to support the interaction between urea and cellulose. The solid-state ¹³C CP/MAS NMR results revealed that complicated complexes are formed by urea, NaOH and cellulose in the solution. Excess urea exists in a free state, which explains why 7 wt% NaOH/12 wt% urea/81 wt% H₂O is the optimal ratio selection to dissolve cellulose. Based on the correlation in which the computed extended Hückel charge on carbon of urea is approximately inversely proportional to its ¹³C chemical shift, a possible interaction model of cellulose, NaOH and urea was proposed. Interactions exist between any two of urea, NaOH and cellulose, which results in the cellulose chain being surrounded by NaOH and urea molecules. NaOH and urea may be in the same surface layer of cellulose chains.