能量选择中子成像技术及其应用

能量选择中子成像技术是利用特定范围波长(能量)的中子进行成像。在热/冷中子范围内(<25meV),能量选择中子成像技术主要基于布拉格边效应和衍射机制,相比常规中子成像技术不但可以显著提高图像对比度,而且能分析应变、应力、织构。在超热中子范围内(>1eV),能量选择中子成像技术主要基于中子共振吸收,中子截面随能量变化是同位素特有的,存在明显的共振吸收峰,因此可以进行同位素的“指纹”识别。能量选择中子成像技术在工程、材料、化学、物理、生物、考古等众多科研领域中有着非常广阔的应用前景。     

蝙蝠喉部发声组织建模及发声机理*

建立蝙蝠发声组织模型对超声机理研究及在智能设备的应用具有重要意义。根据蝙蝠喉部发声组织结构特点,通过有限元方法构建了蝙蝠的3种不同发声组织模型,分析了尺寸、材料力学参数、组织结构和张力4个因素对发声组织特征频率的影响。结果表明,如果用人类声带,按比例缩小构建蝙蝠喉部组织模型,蝙蝠无法发出超声波。构建组织结构含甲状软骨和声带的半鼓状模型和只含声带的条状模型,两种模型的特征频率相近且在合理的参数域内均无法达到超声范围。而含膜条状模型的特征频率可以通过张力进行超声频率的调节,这与文献的实验结果一致。因此,可基于含膜条状模型对蝙蝠喉管发声组织进行建模及其发声机理研究。     

Microwave Pyrolysis and Electrochemical Supercapacitor of S-doped g-C_3N_4 Nanoparticles

In this study, S-doped g-C_3N_4 nanoparticles were successfully prepared by one-step solid-state microwave synthesis. The detailed characterizations through XRD, FT-IR, SEM and XPS were studied. In addition, the electrochemical properties as supercapacitor of the sample were tested by cyclic voltammetry(CV), galvanostatic charge-discharge(GCD) and electrochemical impedance spectroscopy(EIS) techniques. The results showed a high specific capacitance of 691 F/g at current density of 4 A/g in 2 M KOH + 0.15 M K_3[Fe(CN)_6] electrolyte. This study shows that the microwave synthesis is a promising way to design carbon-based electrodes for supercapacitor.     

A MALDI-MS sensing chip prepared by non-covalent assembly for quantitation of acid phosphatase

A novel sensing chip was designed for MALDI-MS quantitation of acid phosphatase(ACP).The ACP sensing chip was constructed through non-covalent interaction of streptavidin and biotin for the assembly of biotinylated peptide substrate on biotinylated polyethylene-glycol(PEG)modified indium-tin oxide(ITO)slide.In the presence of ACP,the peptide substrate was dephosphorylated under acidic condition to generate a new mass signal.The quantitative assay of ACP was achieved with the mass signal ratio of product to the sum of product and left peptide substrate.Under optimal detection conditions,the ratio was linearly correlated with the concentration of ACP in the range of 0.05–12 g/L with a detection limit(LOD)of 0.04 g/L.The designed ACP sensing chip has been used to analyze ACP in complex clinical samples,which exhibited high selectivity,good repeatability,and admirably anti-interference ability.This work further demonstrates the concept of MS sensing and the application of MALDI-MS in quantitative analysis,and provides a convenient method for the quantitation of proteases in clinical diagnosis.     

Insights into the Allosteric Effect of SENP1 Q597A Mutation on the Hydrolytic Reaction of SUMO1 via an Integrated Computational Study

Small ubiquitin-related modifier (SUMO)-specific protease 1 (SENP1) is a cysteine protease that catalyzes the cleavage of the C-terminus of SUMO1 for the processing of SUMO precursors and deSUMOylation of target proteins. SENP1 is considered to be a promising target for the treatment of hepatocellular carcinoma (HCC) and prostate cancer. SENP1 Gln597 is located at the unstructured loop connecting the helices α4 to α5. The Q597A mutation of SENP1 allosterically disrupts the hydrolytic reaction of SUMO1 through an unknown mechanism. Here, extensive multiple replicates of microsecond molecular dynamics (MD) simulations, coupled with principal component analysis, dynamic cross-correlation analysis, community network analysis, and binding free energy calculations, were performed to elucidate the detailed mechanism. Our MD simulations showed that the Q597A mutation induced marked dynamic conformational changes in SENP1, especially in the unstructured loop connecting the helices α4 to α5 which the mutation site occupies. Moreover, the Q597A mutation caused conformational changes to catalytic Cys603 and His533 at the active site, which might impair the catalytic activity of SENP1 in processing SUMO1. Moreover, binding free energy calculations revealed that the Q597A mutation had a minor effect on the binding affinity of SUMO1 to SENP1. Together, these results may broaden our understanding of the allosteric modulation of the SENP1−SUMO1 complex.     

碘化铅单晶体生长新方法探索

本文分析了用布里奇曼法生长碘化铅单晶体的结晶过程。发现坩埚下降法生长碘化铅单晶体过程中,碘的蒸发与凝结、铅的分凝与沉淀是影响晶体质量的两个重要因素。提出了采用U型安瓿提拉方式生长碘化铅单晶体的新方法,有效抑制了碘的蒸发并排除了分凝的铅,获得了桔红色半透明的碘化铅晶体。经测试,晶体的结晶性好,红外透过率达45%,电阻率为1.7×1012Ω.cm,为制备性能优异的碘化铅室温核辐射探测器奠定了基础。     

燃烧剂对低温燃烧合成Pr-CeO2粉体结构与性能的影响

以乙酸铵和柠檬酸为燃烧剂,Ce(NO3)3·6H2O和Pr6O11为主要原料,采用低温燃烧法(LCS)制备了Ce0.95Pr0.5O2纳米晶粉体.用DSC、XRD、SEM及色度测试等手段研究了Ce0.95Pr0.5O2纳米晶微粒前驱体的着火温度、产物晶体结构、晶体形貌及色度.结果表明:乙酸铵和柠檬酸作为燃烧剂的反应前驱体着火温度分别在250℃和300℃左右.两种燃烧产物均为单一的萤石型固溶体.与柠檬酸相比,乙酸铵作为燃烧剂得到的燃烧产物结晶程度更完善、Pr离子进入CeO2晶格的含量更多、呈色更好,且颗粒的团聚程度变小.根据Scherrer公式计算,用两种燃烧剂制备产物的平均晶粒尺寸分别为20～30 nm和10～15 nm,为纳米晶颗粒.最后得到Ce0.95Pr0.5O2粉体的颗粒尺寸则在200～300 nm之间.乙酸铵与硝酸铈的最佳摩尔配比为2:1,柠檬酸与硝酸铈的最佳摩尔配比为3:1.     

用化学溶液方法在Ni-5at%W基底上制备La2Zr2O7过渡层的研究

La2Zr2O7(LZO)过渡层以其独特的物理化学性质越来越受到人们的关注。本文以乙酰丙酮镧和乙酰丙酮锆为前驱盐,丙酸为溶剂配置前驱液,用化学溶液方法(CSD)在具有立方织构的Ni-5at%W基底上制备了LZO过渡层薄膜。研究了前驱液成分、性质以及退火温度对LZO成相以及取向的影响。用常规XRD和X射线四环衍射仪分析了LZO薄膜的相成分和织构。结果显示,在1050℃下退火可以获得强立方织构的LZO薄膜,其中(222)峰的Phi扫描半高宽值为8.95°;(400)峰的Chi扫描半高宽值为6.8°。用高分辨扫描电子显微镜(FE-SEM)观察到LZO薄膜表面均匀致密,没有裂纹和空洞。     

Tailoring Pore Structure and Morphologies in Covalent Organic Frameworks for Xe/Kr Capture and Separation

As a rising star among porous solid materials, covalent organic frameworks(COFs) with excellent properties including but not limit to facilely controllable structure, high porosity, and multi-chemical functionality represent significant potential for efficient ¹²⁷Xe/⁸⁵Kr capture and separation. In this study, through tuning the length of the organic ligands, two-dimensional(2D) COF mate-rials with identical connection group but different pore properties, denoted as ATFG-COF and TpPa-COF with AA-stacking model and TpBD-COF with AB-stacking model were synthesized and tested for Kr and Xe adsorption for the first time. Adsorption measurements indicate that the narrower pore apertures and higher porosity are conducive for COF materials to capture Xe and Kr. Furthermore, the Henry's constant, isosteric heat of adsorption(Q_st), and ideal adsorbed solution theory(IAST) selectivity of ATFG-COF, the pore size of which is closest to the kinetic diameter of the Xe atom(0.41 nm) among 2D COF materials, were carried out based on the single component sorption isotherms. The results illustrate that the high isosteric heat values of Xe/Kr adsorption on ATFG-COF are 25 and 16 kJ/mol at room temperature, respectively. Henry's law predicts that the selectivity factor of Xe to Kr is 6.07, consistent with the adsorption selectivity(ca. 6) calculated based on the IAST.     

基于CMOS图像传感器的成像系统设计

以OV 5 116CMOS图像传感器为例 ,讨论了基于CMOS图像传感器的成像系统的电路设计方法及系统设计中应注意的问题 ;并通过对CMOS图像传感器外围电路的优化设计实现了成像系统的微型化和轻量化。