藤黄酸诱导肺癌细胞H1975凋亡的机制研究

目的 研究藤黄酸（GA）诱导人肺癌细胞H1975凋亡的分子机制,探讨氧自由基（ROS）和JNK信号通路在GA杀伤 肺癌细胞中的作用。方法 以人肺癌细胞H1975为研究对象,MTT法测定GA抑制细胞增殖的作用,Annexin V/PI 双染法测定细胞凋亡率,DCFH-DA 法测定ROS 含量,JC-1探针染色分析线粒体膜电位（MMP）,Western blot检测JNK 信号通路的激活和线粒体凋亡途径相关蛋白表达的变化。结果 GA 呈剂量依赖性抑制H1975细胞的增殖,各实验组细胞存活率与空白对照组比较,均有统计学差异（P＜0.05 或0.01）。1、2.5 和5滋mol/L GA 作用24h 后,细胞凋亡率分别为25.2%、51.8%和75.1%,剪切型凋亡相关蛋白cleaved caspase-9、cleaved caspase-3 和cleaved PARP 的表达随GA 浓度增高而显著增加,与空白对照组比较,均有统计学差异（P＜0.05或0.01）。GA 作用2h 后H1975细胞ROS 含量显著升高,磷酸化JNK（p-JNK）表达上调（P＜0.05或0.01）。GA 作用16h后各实验组细胞MMP 均明显降低（均P＜0.05）。GA 作用24h后实验组细胞线粒体凋亡途径相关蛋白Bax、Bak、Bik表达增加,而抗凋亡蛋白Bcl-2表达与空白对照组相比明显下降（P＜0.05 或0.01）。结论 GA 具有诱导H1975 细胞凋亡的作用,其可能机制是上调细胞内ROS含量,激活JNK 信号通路,进而引起MMP 降低和线粒体凋亡途径激活。     

Preparation and thermal properties of poly[acrylonitrile-co-(β-methylhydrogen itaconate)] used as carbon fiber precursor

In order to replace terpolymer with bipolymer, a bifunctional comonomer β-methylhydrogen itaconate (MHI) containing carboxyl group and ester group was synthesized to prepare poly[acrylonitrile-co-(β-methylhydrogen itaconate)] [P(AN-co-MHI)] bipolymers used as carbon fiber precursor for improving the stabilization and spinnability at the same time. The P(AN-co-MHI) bipolymers with different monomer feed ratios were characterized by elemental analysis, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). The results show that both the polymerization conversion and molecular mass of P(AN-co-MHI) reduce with the increasing MHI amounts in the feed due to the larger molecular volume of MHI than acrylonitrile (AN). The monomer reactivity ratios were calculated by Fineman–Ross and Kelen–Tüdõs methods, the results show good agreement and MHI possesses higher reactivity than AN. Two parameters $ E_{\text{s}} = A_{{1,629\,{\text{cm}}^{ - 1} }} /A_{{2,244\,{\text{cm}}^{ - 1} }} $ and $ SI = (I_{0} - I_{\text{S}} )/I_{0} $ were defined to evaluate the extent of stabilization, and the activation energy (E _a) of the cyclization was calculated by Kissinger method and Ozawa method. The FTIR, XRD, and DSC results show that P(AN-co-MHI) bipolymers exhibit significantly improved stabilization characteristics than PAN homopolymer, such as larger extent of stabilization, lower initiation temperature, and smaller E _a of cyclization, which is attributed to the ionic initiation by MHI comonomer and it is beneficial to preparing high-performance carbon fiber.     

Copper‐Catalyzed Three‐Component Azidotrifluoromethylation/Difunctionalization of Alkenes

A novel three‐component strategy for the azidotrifluoromethylation of alkenes has been presented here. The reaction proceeded smoothly under gentle temperature and gave the bifunctional olefins in high yields. Furthermore, 1,3‐dipolar reactions between azide‐containing products and phenylacetylene revealed great potential in molecular modification by using this method.     

离子印迹磁固相萃取-石墨炉原子吸收光谱法联用分析环境水样中痕量Ni(Ⅱ)

本文通过乳液聚合法制备磁性离子印迹材料Fe3O4@SiO2@IIM,并运用多种技术手段对其进行了表征。所制备的Fe3O4@SiO2@IIM磁材料颗粒较均一,粒径约为20nm,单分散性好,具有超顺磁性(饱和磁化强度为8.66emu·g-1)。基于此,建立了离子印迹磁固相萃取(IIMSPE)-石墨炉原子吸收光谱法(GFAAS)联用技术分析环境水样中Ni(Ⅱ)的新方法。对影响MSPE的因素进行了详细的考察。在最优实验条件下,方法对Ni(Ⅱ)的检出限为0.015ng·mL-1,相对标准偏差(RSDs)为7.3%(n=7,c=0.1ng·mL-1),富集倍数为24.8,所制备的磁性离子印迹材料不同批次间RSDs为10.9%(n=5,c=0.1ng·mL-1),所合成的材料可以重复使用5次以上。采用该方法分析了标准水样(GSBZ50009-88)中的Ni(Ⅱ)含量,验证方法的准确性,测定值和标准值吻合良好。将该方法应用于东湖水和长江水中Ni(Ⅱ)的测定,加标回收率为90.6%~107.2%。     

Preparation of MnO2 Loaded Hydrothermal Carbon-coated Electrospun PAN Fiber Membranes for Highly Efficient Adsorption and Separation of Cationic Dye

Hydrothermal carbonaceous materials and MnO₂ have been proved to be promising adsorbents to remove organic dyes from wastewater. In this study, flexible MnO₂ loaded hydrothermal carbon-coated electrospun poly-acrylonitrile(AC/MnO₂/PAN) fiber membranes were fabricated by a facile one-step hydrothermal method and activated by NaOH solution. The composite fibers exhibited large adsorption capacity toward cationic dyes and excellent mechanical properties. The adsorption performance can be fitted well with pseudo-second-order model and Langmuir isotherm model. The maximum adsorption for methylene blue(MB), methyl violet(MV) and malachite green(MG) are 1173.27,1106.31 and 1129.89 mg/g, respectively, according to Langmuir fitting. The AC/MnO₂/PAN fiber membrane also showed satisfactory performances for selective adsorption and recyclability. In addition, based on selective adsorption, the AC/MnO₂/PAN fiber membranes that are repulsive to the anionic dye methyl orange(MO) can separate the MB/MO mixture solution by dynamic filtration. Thus, this work not only provides a facile strategy to fabricate large capacity adsorbents, but also demonstrates the potential applications in the dye wastewater treatment field.     

超声波燃气表矩形流道的雷诺修正系数仿真研究

在超声波流量计测量技术中, 雷诺修正系数相关的研究对于提高计量精度有重要作用. 为研究矩形流道的雷诺修正系数与雷诺数的关系, 对矩形流道在常温常压流量较小情况下进行仿真, 结果发现: 矩形流道层流状态下的雷诺修正系数与雷诺数呈线性相关. 保持压强、体积流量不变, 在不同温度下进行仿真及拟合, 结果表明: 在不同温度下雷诺修正系数与雷诺数的线性关系依然满足. 在上述实验基础上, 对矩形流道湍流状态下的雷诺修正系数与雷诺数关系进行研究, 通过改变温度、压强和体积流量进行仿真及拟合发现, 矩形流道湍流状态下雷诺修正系数与雷诺数呈非线性相关.     

片段化森林中檵木幼苗种内叶经济性状变异及其驱动因子

在异质性生境中,种内功能性状变异有助于植物对环境的适应,进而影响种群更新、群落构建和生态系统过程。探讨了种内叶经济性状的变异及受生境异质性的塑造情况。以千岛湖片段化生境中的常见种檵木（Loropetalum chinense）的幼苗为研究对象,测定了200株檵木幼苗个体水平的7个叶经济性状（比叶面积SLA、叶全碳量C、叶全氮量N等）及其对应的生境因子（郁闭度、土壤全碳量、土壤全氮量等）,采用相关性检验、主成分分析和线性混合效应模型等方法探讨片段化森林中檵木幼苗的种内叶经济性状变异及生境异质性对该变异的驱动作用。结果显示：（1） 在7个叶经济性状所构成的21对相关性分析中,有12对显著相关。经主成分分析降维后,主成分1（PC1）占性状总变异的43.02%,主要与比叶面积、叶绿素浓度、叶全氮量呈正相关,与叶干物质质量分数和叶碳氮比呈负相关,体现了檵木的种内叶经济谱,可反映叶片的最大光合效率。（2）片段化对生境条件和叶经济性状均有影响。岛屿森林群落的郁闭度显著低于大陆。相对于大陆,岛屿中的檵木幼苗趋向于更小的PC1值（缓慢投资-收益策略）;大岛边缘较大岛内部偏向于更小的PC1值。（3）生境因子中,郁闭度对PC1具有显著正效应。研究表明,片段化生境中的檵木在幼苗阶段存在叶经济谱,生境片段化可通过影响生境条件进而改变檵木幼苗的叶经济性状。随着生境片段化程度的加剧,檵木幼苗的叶经济性状逐渐向缓慢投资-收益策略靠拢。     

贪婪格点路径的一些性质

设{Xv:v∈Zd}是一族独立同分布的随机变量序列,对Zd上的任意一路径π,定义S(π)=∑v∈πXv,记Mn=maxπ∈Π0(n)S(π),Π0(n)表示从原点出发大小为n的自不相交的路径的全体.论文讨论Mn的性质,得到了类似完全收敛性的结果,即对任意的ε>0,∑∞n=11nPMnn-M>ε<∞.另外还讨论了Xv允许取负值的情形,得到类似的结果,从而推广了Gandolfi和Kesten所研究的贪婪格点路径模型.     

粗糙度与气体稀薄性对微尺度流动特性的影响

对氮气和氦气在粗糙微通道以及光滑微通道内流动进行了阻力特性实验研究。实验结果表明,即使在较小的相对粗糙度高度下,由于微通道中的粗糙度分布密集,会极大地增加流动阻力,这是导致文献中微通道流动阻力系数实验值相互偏差的主要原因之一;而对于滑移区的气体流动,气体稀薄性使流动阻力明显减小而导致流量增加。     

DSMC方法下给定热流边界条件的实施

本文详细讨论了DSMC方法中流体温度、能量及边界热流的统计方法,发展了一种从边界热流求得与壁面碰撞分子反射速度的方法。该方法被称为逆温度抽样算法(ITS,Inverse Temperature Sampling)方法。在此基础上,本文发展了DSMC方法中壁面处给定热流边界条件的实施方法。计算结果表明: ITS方法能准确抽样反射分子的特征温度,进而求得分子反射速度。基于该方法的给定热流边界条件可以准确求得壁面处温度分布,以及流场内的压力、速度。