Application of diaza-18-crown-6-capped beta-cyclodextrin bonded silica particles as chiral stationary phases for ultrahigh pressure capillary liquid chromatography

Two bonded chiral stationary phases (CSPs), 8-aminoquinoline-2-ylmethyl- and 8-aminoquinoline-7-ylmethyl-diaza-18-crown-6-capped [3-(2-O-beta-cyclodextrin)-2-hydroxypropoxy]propylsilyl silica particles (non-porous, 1.5 microm), have been prepared and evaluated using capillary liquid chromatography at high pressures (> or = 8000 p.s.i.). High column efficiency (up to 400 000 plates m(-1)) was achieved for chiral separations. These CSPs with two recognition sites, i.e. substituted-diaza-18-crown-6 and beta-cyclodextrin combined with high chromatographic efficiency provide good resolution of a variety of enantiomers and positional isomers in relatively short times under reversed-phase conditions. After inclusion of a Ni (II) ion from the mobile phase, the positively charged crown ether-capped beta-cyclodextrin facilitates specific static, dipolar, and host-guest complexation interactions with solutes.     

反胶束笼对纳米氯化银反应性能的微环境限定

研究了反映束中直径为１０￣１７ｎｍ的ＡｇＣｌ微料与亚甲基蓝之间的作用，比较了阴离子型和非离子型表面活性剂组成的反胶束微环境的影响，讨论了亚甲基蓝在粒子上的吸附，二聚体形成的钠米ＡｇＣｌ粒子对亚甲基蓝荧光猝灭机制。     

赖氨酸修饰壳聚糖磁性超微载体的制备和表征

本文设计并合成了良好水溶性的赖氨酸修饰壳聚糖,并对制备工艺进行了优化.产物通过红外(FTIR)和核磁(1H-NMR)进行了表征,并将其作为壳层材料制备了赖氨酸修饰壳聚糖磁性超微载体.通过光电能谱(XPS)、透射(TEM)、激光粒度仪、X射线衍射(XRD)、磁性能测试(VSM)对载体进行了表征.结果表明,制备的赖氨酸修饰壳聚糖磁性超微载体表面带有大量的氨基(-NH2),粒径分布较为均一(100nm左右),形貌较为规则,并具有良好的超顺磁性,因而该载体具有更加良好的性能.     

硅胶键联MPc的制备及其在氧活化中的作用

过渡金属酞等配合物（MPC）用手均相液相氧化中作催化剂已有不少报导，象许多均相催化剂一样，MPC用于均相反应存在着难于从反应体系中分离出来的问题．把均相配合物催化剂固载在无机氧化物如硅股或有机高分子载体上是解决这一问题的一种方法．我们曾尝试把MP。固载在分子筛载体和硅胶载体上，并用ESR研究其对O2的活化作用[1，2]．本文报导MPc通过共价键键联固载在SiO2上，并研究其对O2的活化作用．1实验部分1．1试剂HSIC13为日本东京化成株式会社产品，二级试剂·发烟硫酸（SO。质量分数大于20％）为分析纯试剂．PCl5为化学纯试…     

选择性氧化含氰基的对硝基苯硫醚

选择性氧化含氰基的对硝基苯硫醚岳国仁，王建华，张正（南京大学化学系南京２１０００８）关键词含氰基硫醚，选择性氧化，四水合过硼酸钠据报道［１］对硝基苯磺酰基乙腈的合成，反应时间长，可采用四水合过硼酸钠（ＮａＢＯ３·４Ｈ２Ｏ）作为氧化剂，受到重视［２，３...     

Activation of Carbon Dioxide and Synthesis of Propylene Carbonate

Cycloaddition of carbon dioxdie and propylene oxide to propylene carbonate catalyzed by tetra-tert-butyl metal phthalocyanine in the presence of tributylamine(TBA) shows higher yield than catalyzed by unsubstituted metal phthalocyanine.Comparing different catalysts of diverse metals,(t-Bu)4PcMg is more active than (t-Bu)PcFe ,But(t-Bu)4PcCo and (t-Bu)4PcNi only have low catalytic activities towards the reaction.Moreover,the yield will increase as the temperature increases.     

复合生物材料的研究进展

从力学性能的改善和降解速率的可调度等角度,总结了复合生物材料与单一组分的材料相比,在生物医学领域应用中所表现出的综合使用性能的优越性。综述了复合生物材料,特别是用于骨修复的各类有机／无机复合材料近年来的研究进展状况。提出将与人骨中磷灰石微晶类似的羟基磷灰石纳米粒子与可降解聚酯材料进行复合,能够得到具有优越骨诱导性能并且能够降解的新型骨修复材料。这方面的研究代表了有机／无机复合生物材料领域新的发展方向。     

Theoretical studies of mechanisms of cycloaddition reaction between difluoromethylene carbene and acetone

Mechanisms of the cycloaddition reaction between singlet difluoromethylene carbene and acetone have been investigated with the second‐order Møller–Plesset (MP2)/6‐31G* method, including geometry optimization and vibrational analysis. Energies for the involved stationary points on the potential energy surface (PES) are corrected by zero‐point energy (ZPE) and CCSD(T)/6‐31G* single‐point calculations. From the PES obtained with the CCSD(T)//MP2/6‐31G* method for the cycloaddition reaction between singlet difluoromethylene carbene and acetone, it can be predicted that path B of reactions 2 and 3 should be two competitive leading channels of the cycloaddition reaction between difluoromethylene carbene and acetone. The former consists of two steps: (i) the two reactants first form a four‐membered ring intermediate, INT2, which is a barrier‐free exothermic reaction of 97.8 kJ/mol; (ii) the intermediate INT2 isomerizes to a four‐membered product P_2b via a transition state TS2b with an energy barrier of 24.9 kJ/mol, which results from the methyl group transfer. The latter proceeds in three steps: (i) the two reactants first form an intermediate, INT1c, through a barrier‐free exothermic reaction of 199.4 kJ/mol; (ii) the intermediate INT1c further reacts with acetone to form a polycyclic intermediate, INT3, which is also a barrier‐free exothermic reaction of 27.4 kJ/mol; and (iii) INT3 isomerizes to a polycyclic product P₃ via a transition state TS3 with an energy barrier of 25.8 kJ/mol. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Zig‐Zag Diphosphene Oligomers Linked by Silver(I) Cation

The coordination of silver cation to diphosphene Mes*P=PMes* ( 1 , Mes* = ^tBu₃C₆H₂) was investigated in detail. The reaction of 1 with Ag[Al(OR_F)₄] (OR_F = OC(CF₃)₃) in the ratios of 2 : 1, 3 : 2 and 1 : 2 led to the formation of the first cationic silver linked diphosphene complexes 2 — 4 . Complexes 2 and 3 contain two and three diphosphene molecules linked by the linear Ag(I) cation, respectively, and they feature unusual zig‐zag topologies. Complex 4 is a dinuclear silver complex, and each Ag(I) center features a tetrahedral geometry, coordinated by one phosphorus atom of diphosphene 1 and three chloro atoms of two CH₂Cl₂ molecules.