Enzymatic kinetic of cellulose hydrolysis

The ethanol effect on the Trichoderma reesei cellulases was studied to quantify and clarify this inhibition type. To determine inhibition parameters of crude cellulase and purified exoglucanase Cel7A, integrated Michaelis-Menten equations were used assuming the presence of two inhibitors: cellobiose as the reaction product and ethanol as a possible bioproduct of cellulose fermentation. It was found that hydrolysis of cellulose by crude enzyme follows a model that considers noncompetitive inhibition by ethanol, whereas Cel7A is very slightly competitively inhibited. Crude cellulase is much more inhibited (K _iul=K _icl=151.9 mM) than exoglucanase Cel7A (K _icl=1.6 × 10¹⁵ mM). Also, calculated inhibition constants showed that cellobiose inhibition is more potent than ethanol inhibition both for the crude enzyme as well as exoglucanase Cel7A.     

杂多阴离子[GeMo12O40]4-α/β异构体的密度泛函研究

采用密度泛函方法，在DND基组水平上，对[GeMo12O40]^4-杂多阴离子最常见的α和β异构体进行了几何构型优化，得到了与X射线晶体衍射实验结果相一致的结构参数，并在此基础上进行了振动频率分析，得到了杂多阴离子的电子结构、热力学特性和振动光谱，通过定义α，β异构体异构化反应的Gibbs函变△Gα-β与温度的关系，研究了这两种异构体的相对稳定性．结果表明：低温时α异构体更稳定，高温时β异构体更稳定些，550K左右为转变点．振动频率分析得到2种异构体的最强峰位于4个频率位置，分别指认为vax(Mo-Od)，vas(Mo-Od)，vas(Mo-Oc-Mo)，vas(Ge-Oa)，vas(Mo-Ob-Mo)振动，与红外光谱(IR)的特征振动峰相对应，观察到了特征频率的振动模式，从理论计算角度说明了Rocchiccioli—Deltcheff关于振动模式的设想是合理的．     

Aerobic oxidation assisted by ligand-free palladium catalysts

Aerobic oxidation of electron-rich benzylic and phenyl allylic alcohols was achieved with high yields with only 0.1 mol.% of Pd(OAc)2 catalyst in the absence of any ligand. This procedure was expected to be valuable for realistic industrial-scale applications from both economic as well as environmental points of view.     

赖氨酸修饰壳聚糖磁性超微载体的制备和表征

本文设计并合成了良好水溶性的赖氨酸修饰壳聚糖,并对制备工艺进行了优化.产物通过红外(FTIR)和核磁(1H-NMR)进行了表征,并将其作为壳层材料制备了赖氨酸修饰壳聚糖磁性超微载体.通过光电能谱(XPS)、透射(TEM)、激光粒度仪、X射线衍射(XRD)、磁性能测试(VSM)对载体进行了表征.结果表明,制备的赖氨酸修饰壳聚糖磁性超微载体表面带有大量的氨基(-NH2),粒径分布较为均一(100nm左右),形貌较为规则,并具有良好的超顺磁性,因而该载体具有更加良好的性能.     

活性炭和石墨混合载体的Pt催化剂（Pt/CG）对乙醇氧化电催化活性的影响

用化学沉积法制备炭载Pt(Pt/C)和以活性炭与石墨作混合载体的Pt(Pt/CG)催化剂。实验结果表明，活性炭与石墨质量比影响Pt/CG催化剂对乙醇氧化的电催化活性。当活性炭与石墨的质量比为15∶1时，制得的Pt/CG催化剂对乙醇氧化的电催化活性最高。     

复合生物材料的研究进展

从力学性能的改善和降解速率的可调度等角度,总结了复合生物材料与单一组分的材料相比,在生物医学领域应用中所表现出的综合使用性能的优越性。综述了复合生物材料,特别是用于骨修复的各类有机／无机复合材料近年来的研究进展状况。提出将与人骨中磷灰石微晶类似的羟基磷灰石纳米粒子与可降解聚酯材料进行复合,能够得到具有优越骨诱导性能并且能够降解的新型骨修复材料。这方面的研究代表了有机／无机复合生物材料领域新的发展方向。     

Pt-SnO2 / C催化剂对乙醇和吸附态CO的电催化氧化

由于乙醇最有可能成为直接甲醇燃料电池（DMFC）的替代燃料，因此近年来。对乙醇的电化学氧化及直接乙醇燃料电池的研究已引起人们的很大兴趣。甲醇毒性较大并且易透过Nafion膜进入阴极造成阴极的混合电位而影响DMFC的阴极性能．这是制约DMFC走向实用化的主要问题之一。因此人们在致力于研究直接甲醇燃料电池的同时．也寻求其它的小分子醇作为甲醇的替代燃料。乙醇是除甲醇以外最简单的醇．它来源广泛．无毒，是可再生和环保型能源．并且也有较高的能量密度和反应活性。但是乙醇在电极上的完全氧化因涉及到C-C键的断裂要比甲醇困难．阳极反应动力学过程也比较缓慢。到目前为止铂基催化剂仍然是乙醇氧化最好的催化剂．虽然也有使用非铂催化剂研究乙醇的电氧化，但催化活性远不如铂基催化剂高。     

A High Sensitivity Detection Method of Singlet Oxygen and Superoxide Anion

This paper, for the first time, reports a method that can be used as a highly sensitive probe for singlet oxygen (^1O2) and superoxide anion (O2^-) in vitro or in vivo. FCLA(3,7-dihydro-6-{4-[2-(N‘-(5-fluoresceinyl)thioureido)ethoxy]phenyl}-2-methylimidazo{1,2-a}pyrazin-3-one sodium salt), a chemiluminescence (CL) analysis reagent, has been reported to sensitively react with ^1O2 and O2^- to emit photons with a spectral peak of 525nm. In this work,when human serum albumin (HSA) was added into FCLA solution to enhance the CL intensity,approximately 20 times, compared to that without HSA. The enhanced CL had the same 525 nm spectral peak, identical to that without HSA. By gradually reducing the molecular oxygen content in the solution, we find that the auto-oxidation of oxygen molecules dissolved in the solution plays an important role in the CL process. Based on these experimental evidences, we propose a novel and highly sensitive detection method of ^1O2 and O2^- which may have a great potential in chemical and medical applications.     

在肽库中进行小肽筛选的初步研究

以合成六肽ＤＧＧＳＡＡ为模型对在噬菌体肽库中进行小肽筛选做了初步研究。结果表明，含有可形成氢键和离子键残基的小肽能够在噬菌体肽库中进行筛选。并用明显提高了筛选的专一性。     

PSt-b-PEO增容PA6/PS共混体系的研究

采用动态力学方法（ＤＭＡ），形态学方法（ＳＥＭ），研究了ＰＳｔ ｂ ＰＥＯ存在下尼龙６（ＰＡ６）／聚苯乙烯（ＰＳ）共混体系的相容性．研究表明，ＰＡ６和ＰＳ的简单共混体系，分散相相畴尺寸大，相界面清晰，断裂面光滑，呈脆性断裂，相容性极差，属不相容体系．而加入少量ＰＳｔ ｂ ＰＥＯ后分散相尺寸变小，界面层变厚，界面粘结力增强，表现出韧性特征．