The effects of flow split ratio and flow rate in manifolds

This paper reports a combined experimental and numerical investigation of three-dimensional steady turbulent flows in inlet manifolds of square cross-section. Predictions and measurements of the flows were carried out using computational fluid dynamics and laser Doppler anemometry techniques respectively. The flow structure was characterized in detail and the effects of flow split ratio and inlet flow rate were studied. These were found to cause significant variations in the size and shape of recirculation regions in the branches, and in the turbulence levels. It was then found that there is a significant difference between the flow rates through different branches. The performance of the code was assessed through a comparison between predictions and measurements. The comparison demonstrates that all important features of the flow are well represented by the predictions.     

Temperature dependence of magnetization in nanocrystalline FeCoZr alloy

The temperature dependence of magnetization of a nanocrystalline Fe₆₀Co₃₀Zr₁₀ alloy annealed at various temperatures to varying crystal sizes was investigated down to 5 K in the field range up to 5 T. The fitting procedure gave T^3/2 as the leading term irrespective of the crystal size. We suggest that the increase of the coefficient by this term for smaller crystals may be connected to an increased relative volume of their surface.     

Neighborhood unions and the cycle cover number of a graph

For several years, the study of neighborhood unions of graphs has given rise to important structural consequences of graphs. In particular, neighborhood conditions that give rise to hamiltonian cycles have been considered in depth. In this paper we generalize these approaches to give a bound on the smallest number of cycles in G containing all the vertices of G. We show that if for all x, y ? V(G), |N(x) ∩ N(y)| ≧ 2n/5 + 1, then V(G) is coverable by at most two cycles. Several related results and extensions to t cycles are also given.     

Thermal conductivity of poly(vinyl chloride)/polycaprolactone blends

Thermal diffusivity, heat capacity, and density of polyvinyl chloride/polycaprolactone (PVC/PCL) blends were measured by the laser flash method, DSC, and pycnometry, respectively. The thermal conductivity of the PVC/PCL blends was determined from the results. The miscibility of the blend and crystallinity of PCL were determined by DSC. The effect of blend structure on thermal conductivity is discussed. The phase compositions of the PVC/PCL blends are of three types depending on PCL content: i.e., up to 33%, from 33 to 70%, and above 70% PCL by weight. Thermal conductivity, thermal diffusivity, and heat capacity of the PVC/PCL blends are strongly affected by the phase composition of the blend, which changes in a complicated way with PCL content. © 1994 John Wiley & Sons, Inc.     

Ion Flux from the Cathode Region of a Vacuum Arc

This paper reviews the properties of the cathode ion flux generated in the vacuum arc. The structure and distribution of mass erosion from individual cathode spots and the characteristics of current carriers from the cathode region at moderate arc currents are described. An appreciable ion flux (～10% of total arc current) is emitted from the cathode of a vacuum arc. This ion flux is strongly peaked in the direction of the anode, though some ion flux may be seen even at angles below the plane of the cathode surface. The observed spatial distribution of the ion flux is expressed quite well as an exponential function of solid angle. The ion flux is quite energetic, with average ion potentials much larger than the arc voltage, and generally contains a considerable fraction of multiply-charged ions. The average ion potential and ion multiplicity increase significantly for cathode materials with higher arc voltages, but decrease with increasing arc current for a particular material. The main theories concerning ion acceleration in cathode spots are the potential hump theory (PH), which assumes that all ions are created at the same potential, and the gas dynamic theory (GD), which assumes that all ions are created with the same flow velocity. Experimental data on the potentials and energies of individual ions indicates that these theories in their original forms are not quite correct, however extensions or modifications of the PH and GD theories seem very likely to be able to predict correct values for the charge states, potentials, and energies of individual ions.     

Ion scattering spectroscopy and scanning tunneling microscopy: A powerful combination for surface structure analysis

Low-energy ion backscattering and scanning tunneling microscopy (STM) have been used in combination to get better insight into the field of surface crystallography. The synergic effectiveness resulting from the complementing character of the two methods has been exemplified at clean NiAl(111) and for oxygen and nitrogen adsorption on Cu(110). The position of the atom cores is accessible by the low-energy noble gas impact collision ion scattering spectroscopy with neutral detection (NICISS). As a technique averaging over a macroscopic area of the sample, NICISS is better suited to supply information on features of completely developed phases, either on clean or adsorbate saturated surfaces. Additional information, on the other hand, can be gained by scanning tunneling microscopy (STM), which as a powerful local probe may be used to image surfaces with atomic resolution and to monitor defects, steps and the growth kinetics of e.g. adsorption-induced phase changes.     

Growth of InP/InGaAs multiple quantum well structures by chemical beam epitaxy

InP/InGaAs multiple quantum well structures with up to 200 periods have been grown by CBE. These structures exhibit exceptional lateral uniformity, measured as ±1 Å in period, ±13 ppm in lattice mismatch and ±0.5 nm in wavelength across a 2 inch wafer. Good surface morphology, sharp interfaces and excellent growth control have all been demonstrated.