Ion Flux from the Cathode Region of a Vacuum Arc

This paper reviews the properties of the cathode ion flux generated in the vacuum arc. The structure and distribution of mass erosion from individual cathode spots and the characteristics of current carriers from the cathode region at moderate arc currents are described. An appreciable ion flux (～10% of total arc current) is emitted from the cathode of a vacuum arc. This ion flux is strongly peaked in the direction of the anode, though some ion flux may be seen even at angles below the plane of the cathode surface. The observed spatial distribution of the ion flux is expressed quite well as an exponential function of solid angle. The ion flux is quite energetic, with average ion potentials much larger than the arc voltage, and generally contains a considerable fraction of multiply-charged ions. The average ion potential and ion multiplicity increase significantly for cathode materials with higher arc voltages, but decrease with increasing arc current for a particular material. The main theories concerning ion acceleration in cathode spots are the potential hump theory (PH), which assumes that all ions are created at the same potential, and the gas dynamic theory (GD), which assumes that all ions are created with the same flow velocity. Experimental data on the potentials and energies of individual ions indicates that these theories in their original forms are not quite correct, however extensions or modifications of the PH and GD theories seem very likely to be able to predict correct values for the charge states, potentials, and energies of individual ions.     

Approximate Solution of the Saha Equation — Temperature as an Explicit Function of Particle Densities

The Saha equation for a plasma in thermodynamic equilibrium (TE) is approximately solved to give the temperature as an explicit function of population densities. It is shown that the derived expressions for the Saha temperature are valid approximations to the exact solution. An application of the approximate temperature to the calculation of TE plasma parameters is also described.     

Ion scattering spectroscopy and scanning tunneling microscopy: A powerful combination for surface structure analysis

Low-energy ion backscattering and scanning tunneling microscopy (STM) have been used in combination to get better insight into the field of surface crystallography. The synergic effectiveness resulting from the complementing character of the two methods has been exemplified at clean NiAl(111) and for oxygen and nitrogen adsorption on Cu(110). The position of the atom cores is accessible by the low-energy noble gas impact collision ion scattering spectroscopy with neutral detection (NICISS). As a technique averaging over a macroscopic area of the sample, NICISS is better suited to supply information on features of completely developed phases, either on clean or adsorbate saturated surfaces. Additional information, on the other hand, can be gained by scanning tunneling microscopy (STM), which as a powerful local probe may be used to image surfaces with atomic resolution and to monitor defects, steps and the growth kinetics of e.g. adsorption-induced phase changes.     

Specific carbon-13 labelling of leucine residues in human growth hormone.

Biosynthetic human growth hormone specifically 13C-labelled in the carbonyl positions of all 26 leucine residues has been obtained by recombinant DNA techniques using 13C-labelled leucine and an E. coli strain that requires leucine. It is shown that, on the whole, the labelling is specific with no significant mislabelling as would have been the case had the 13C-labelled leucine been metabolized.     

Reactions of the nitrate radical with a series of reduced organic sulphur compounds in air

A 480 L evacuable reaction chamber, equipped with FT-IR spectroscopy on-line and ion chromatography off-line, has been used to study the gas phase reaction between the nitrate radical, NO₃, and the reduced organic sulphur compounds CH₃CH₂SH, (CH₃CH₂)₂S, (CH₃CH₂)₂S₂, and CH₃CH₂SCH₃ in air. The products CH₃CH₂SO₃H, SO₂, H₂SO₄, CH₃CHO, and CH₃CH₂ONO₂ were identified and quantified in the reactions of the first three compounds, CH₃CH₂SH, (CH₃CH₂)₂S, and (CH₃CH₂)₂S₂. The reaction products were CH₃CH₂SO₃H, CH₃SO₃H, SO₂, H₂SO₄, CH₃CHO, and CH₂O in the reaction of CH₃CH₂SCH₃. On the basis of identified reaction products and intermediates observed in the infrared spectra, mechanisms are proposed for the reactions between the NO₃ radical and the four reduced organic sulphur compounds. The results of this study, together with those from previous experiments performed in this laboratory on CH₃SCH₃, CH₃SH, and CH₃SSCH₃ lead to the conclusion that all these species, in the reaction with the NO₃ radical, follow a similar degradation mechanism producing SO₂, H₂SO₄, R? SO₃H, R? CHO, and R? CH₂ONO₂, as the main reaction products. The inital step of the reaction of NO₃ with R? S? R and R? S? H type (R = CH₃, CH₂CH₃) reduced organic sulphur compounds was found to be H-atom abstraction, probably after the formation of an initial adduct. For the reaction between NO₃ and R? S? S? R type compounds, evidence for an addition-decomposition reaction, as the initial steps, was obtained. R? S·, R? S(O)·, and R? S(O)₂· appear to be formed as intermediates in all the reactions. © John Wiley & Sons, Inc.     

Determination of trace elements in bottled water in Greece by instrumental and radiochemical neutron activation analyses

Summary Four different bottled water brands sold in Greece in the winter of 2001-2002 were analyzed for a wide range of chemical elements, using neutron activation analysis (NAA). The elements Na and Br were determined instrumentally (INAA), whereas the other metals and trace elements radiochemically (RNAA). The results indicated that the mean level of all the elements determined in the samples were well within the European Union (EU) directive on drinking water and accomplish the drinking water standards of the World Health Organisation (WHO) as well as of the Food and Drug Administration (FDA).     

Monitoring of safety features,fissile material accumulation and concentration in nuclear reprocessing by active and passive neutron counting techniques

The application, the advantage and limits of neutron monitoring techniques, such as Hf-monitors, fissile material accumulation and concentration monitors are being discussed. The active neutron counting technique applied to emptied pulsed extraction columns containing Hf-sieve plates allows conclusive answers as to the position of the plates in the columns. Pu-accumulations on Hf-sieve plates in pulsed extraction columns can be estimated within a factor of two, whereby the detection limit is about equal to or less than 1 g Pu/plate. Fissile material concentration changes of 1.1 g/l can be detected in the case of²³⁵U in solution and of 0.4 Pu/l if a²³⁹Pu/²⁴⁰Pu ratio of 4 to 1 is assumed.     

Molecular weight dependence of diblock copolymer segregation at a polymer/polymer interface

Utilizing forward recoil spectrometry (FRES), we have determined the segregation isotherm which describes the interfacial excess z_i^* of diblock copolymers of poly (d₈-styrene-b-2-vinylpyridine) (dPS-PVP) at the interface between the homopolymers PS and PVP as a function of ?_∞, the volume fraction of diblock copolymer remaining in the host homopolymer. All the samples were analyzed after annealing at temperatures and times sufficient to achieve equilibrium segregation. The effect of the degree of polymerization of both the diblock copolymers and the host homopolymers on the segregation isotherm is investigated. When the degree of polymerization of the homopolymer is much larger than that of the diblock copolymer, the normalized interfacial excess (z_i^*/R_g), where R_g is the radius of gyration of an isolated block copolymer chain, is a universal function of that portion of the block copolymer chemical potential due to chain stretching. The existence of such a universal function is predicted by theory and its form is in good agreement with self-consistent mean field calculations. Using these results, one can predict important aspects of the block copolymer segregation (e.g., the saturation interfacial excess) without recourse to the time-consuming numerical calculations. © 1994 John Wiley & Sons, Inc.     

Influence of intrachain hydrogen bonding on the cyclization of a polystyrene chain

Cyclization of a polystyrene chain (M_n = 10,600; M_w/M_n = 1.09) both ends labeled with 4-(1-pyrenyl)butanoamide groups was studied in cyclohexane between 25 and 95°C. The amide groups (peptide bonds) at both ends can form an intrachain hydrogen bond between the amide hydrogen at one chain end and the carbonyl oxygen at the other. The presence of two sets of conformers, random coils, and chains cyclized through hydrogen bonding, complicates the data analysis. The pyrene excimer kinetics of this polymer is well described by a model composed of two monomers (hydrogen bonded and nonbonded chains) and one excimer, in equilibrium. The cyclization rate constant for hydrogen-bonded chains is larger than the one for nonhydrogen-bonded chains. The pyrene excimer binding energy (ca. 1.6 kcal/mol) is lower than the published value for nonhydrogen-bonded chains (～ 9 kcal/mol), suggesting that intrachain hydrogen bonding hinders the stabilization of the excimer. © 1994 John Wiley & Sons, Inc.