On the Causes and Effects of Contaminations during rf Diode Deposition of Cr-Si Alloys

Investigations to the causes and effects of contaminants at the rf diode deposition of CrSi films in a non-heated high vacuum apparatus were carried out comparing an oxygen-free fusion target with an oxygen-containing cermet target. The films of the fusion target contained considerable amounts of oxygen; analogously the oxygen concentration in the films was increased in the case of the cermet target. Moreover, hydrogen was found. The concentration of the contaminants decreased with the sputtering power, however the rate of incorporation increased. For high sputtering rates the contamination process was reproducible and independent of the plant conditioning; the deposited films were depth-homogeneous. The reasons for this behaviour lie in water sources which are activated first of all by the discharge itself. The electrical properties found are explained by the contaminants and the deposition conditions.     

Numerical Study on Population Inversion and Lasing Conditions in an Optically Thick Recombining Helium Plasma

Lasing conditions for He I in a cold recombining helium plasma are numerically discussed including optical thicknesses. A collisional radiative model is used to calculate population densities. We discuss the effect of self absorptions by the background residual gas on the lasing conditions quantitatively. The optical thickness is essential in the calculation and affects the population inversions between level pairs of the singlet state drastically, while those of the triplet state are not affected very much. In the optically thin plasma, the laser lower levels of the singlet state depopulate mainly through radiative transitions. On the other hand, they depopulate mainly through electron collisional deexcitations in the optically thick plasma. Results of the calculations are verified by the spectroscopic observations of an arc-heated magnetically trapped expanding plasma jet generator which we developed. The requirement for the background pressure in which the lasing is possible is discussed quantitatively.     

Molecular addressing? Studies on light-induced reorientation in liquid-crystalline side chain polymers

Polarized light leads to an effective reorientation of the optic axis in the glassy state of liquid-crystalline side chain polymers containing azobenzene mesogenic groups, via a trans-cis and cis-trans isomerization. Using a combination of U V and IR dichroitic studies it is shown for copolymers consisting of chromophores (azobenzene) and non-chromophores (phenylbenzoate) that only the chromophores are reoriented by light as far as the glassy state is concerned. Individual chromophores are thus addressed by photoselection. Photoselection in the fluid nematic state, on the other hand, leads also to a reorientation of the non-chromophores.     

A high performance liquid chromatographic assay for AMP-deaminase activity in the erythrocytes of healthy subjects and patients with inherited purine disorders

A novel method for measuring AMP-deaminase activity in human erythrocytes is presented, based on the determination of the reaction product, IMP, using high performance liquid chromatography. IMP formation was found to be proportional both to the incubation time and the amount of haemolysate over a wide range. The minimal detectable AMP-deaminase activity was more than 1000 times lower than the mean activity found in healthy controls (1083 nmol/h/mg Hb). No marked difference of activity was found in the patients with the following inherited purine disorders: familial juvenile gouty nephropathy and deficiencies of adenosine deaminase, hypoxanthine-guanine phosphoribosyltransferase or adenine phosphoribosyltransferase. The activity in the erythrocytes of patients with chronic renal failure was also similar to controls. The existence of subjects with low erythrocyte AMP-deaminase activity in the population has been confirmed.     

Novel optical techniques for the analysis of polymer surfaces and thin films

Summary We report on novel optical techniques, based on evanescent waves, for the characterization of polymer surfaces and thin films. We first describe photo-ablation studies with polysilane films investigated by surface plasmon microscopy, a technique which is particularly well-suited for ultrathin samples. Thicker films that are homogeneous enough to carry optical waveguide modes can be characterized with high lateral resolution by the recently developed waveguide microscopy. We demonstrate this for a thin film of a solid polyelectrolyte. Finally, we report on surface plasmon field-enhanced Raman-spectroscopic and -imaging investigations of ultrathin Langmuir-Blodgett-Kuhn-layers of cadmium arachidate.W. Hickel is now with HOECHST AG, Angewandte Physik, W-6230 Frankfurt 80     

The liquid-crystalline behaviour of amphiphilic ethane-1,2-diol derivatives incorporating a six membered ring in their principal structure

Novel 3-phenyloxy substituted propane-1,2-diol derivatives, 4-(4-n-hexyloxyphenyl)-butane-1,2-diol and 4-(trans-4-n-pyropylcyclohexyl)-butane-1,2-diol have been synthesized and their thermal behaviour has been studied. These compounds exhibit thermotropic and, after addition of water, also lyotropic liquid-crystalline behaviour. The clearing temperatures of the smectic mesophases were found to be strongly dependent on the alkyl chain length and on the structural units that link the aromatic ring to the alkyl chain and to the diol unit. The behaviour of the aromatic compounds is compared with that of the cyclohexane derivative. Thereby it has been realized that the mesophase stability of the amphiphilic diols incorporating a rigid unit is largely determined by both, the molecular geometry (molecular shape and intramolecular flexibility) and the amphiphilic structural pattern.     

Existence of solutions for the time-dependent thermistor equations

The equations describing the behaviour of temperature/flow microsensorsemploy-ing polysilicon thermistors form a degenerate nonlinearparabolic system. One special feature is that different equationsof this system are to be satisfied on different domains. Bymeans of supersolutions and subsolutions, the maximum principle,and fixed point arguments, the authors show the existence ofsolutions to the equations.     

Magnetic resonance imaging and pulsed Doppler sonography of poststenotic jets: Correlation between signal void and flow velocity distribution

To correlate the appearance of poststenotic jets on gradient echo images with features of localized Doppler spectra of the jets, we studied an in vitro model of steady flow-through stenoses of 86, 96, and 99% area reduction. As fluids, water and a 40% glycerol solution in water were used. MRI was performed with a 1.5 T whole body imager and gradient echo images were obtained in planes parallel to the direction of flow. Doppler spectra were acquired separately from the MR measurements at 1 cm intervals for a distance of 10 cm downstream from the stenosis. Poststenotic signal void was observed for water and for the 40% glycerol solution only if the mean velocity within the stenosis exceeded a limit of 50–60 cm/sec. On the MR images, the jets could be divided into two segments: A proximal jet segment of uniform width equal to the diameter of the stenosis, followed by a distal jet segment which was characterized by broadening and then dissipating signal void. Except for the 99% stenosis, a high signal intensity core was present within the proximal jet segment. In the proximal jet segment, the Doppler measurements showed a low temporal fluctuation of the maximal flow velocity and only little flow opposite to the main flow direction. In the distal jet segment, the velocity fluctuation and the intensity of reverse flow increased sharply. The high signal intensity core of the jet was associated with a poststenotic zone of constant maximal flow velocity. The results demonstrate a close relationship between characteristic features of poststenotic jets in MRI and pulsed Doppler sonography.     

Certified reference materials for the quality control of analysis in the environment

Summary The Community Bureau of Reference (BCR) has undertaken the production of a wide range of certified reference materials (CRMs) for the improvement of accuracy and measurement harmony in various areas of concern at European Community level. This paper provides an overview of the sectors of the BCR-programme in the field of environment i.e. for water systems (water, sediment, biota), soil analysis (soil, fertiliser, waste), plant analysis (aquatic and terrestrial plants), analysis related to animals (e.g. muscle or liver) or man (e.g. industry and food).