Kristallstruktur des Zinkamids Zn[N(SiMe3)2]2

Crystal Structure of the Zinc Amide Zn[N(SiMe₃)₂]₂ X‐ray quality crystals of Zn[N(SiMe₃)₂]₂ (monoclinic, P2₁/c) are obtained by sublimation of the zinc amide Zn[N(SiMe₃)₂]₂ at —30 °C in vacuo (300 torr). According to the result of the X‐ray structural analysis, Zn[N(SiMe₃)₂]₂ contains an almost linear N‐Zn‐N unit with two short N‐Zn bonds.     

Phase formation and control of morphology in sputtered Cu-In alloy layers

The dependence of structural properties and surface morphology of Cu-In alloy layers on the composition and sputtering deposition sequence were investigated by X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The properties of the co-sputtered alloy layers changed abruptly around the composition boundary when the Cu/In ratio reached 1/2. This can be explained by the effective heat of formation (EHF) model, which has been used to predict the sequence of phase formation for metal diffusion couples. The use of a co-sputtered alloy layer with a high In concentration was not suitable for fabricating solar cells, because the film had a very rough morphology due to large In islands formed on the CuIn₂ phase. However, it was possible to minimize this phase by In sputtering followed by co-sputtering with a Cu/In ratio of 1 (Cu-In/In/Glass). This permitted the fabrication of a homogeneous Cu-In alloy layer, which was not possible through the simple co-sputtering.     

On quasi-solution to infeasible linear complementarity problem obtained by Lemke’s method

For a linear complementarity problem with inconsistent system of constraints a notion of quasi-solution of Tschebyshev type is introduced. It’s shown that this solution can be obtained automatically by Lemke’s method if the constraint matrix of the original problem is copositive plus or belongs to the intersection of matrix classes P ₀ and Q ₀.     

Discrete limit theorems for general Dirichlet series. III

Here we prove a limit theorem in the sense of the weak convergence of probability measures in the space of meromorphic functions for a general Dirichlet series. The explicit form of the limit measure in this theorem is given. Partially supported by Lithuanian Foundation of Studies and Science     

On zeta-functions associated to certain cusp forms. I

In the paper the asymptotics for Dirichlet polynomials associated to certain cusp forms are obtained. Partially supported by Lithuanian Foundation of Studies and Science     

Viscoelastic properties of nanostructured natural rubber/polystyrene interpenetrating polymer networks

The effects of the blend ratio and initiating system on the viscoelastic properties of nanostructured natural rubber/polystyrene‐based interpenetrating polymer networks (IPNs) were investigated in the temperature range of ?80 to 150 °C. The studies were carried out at different frequencies (100, 50, 10, 1, and 0.1 Hz), and their effects on the damping and storage and loss moduli were analyzed. In all cases, tan δ and the storage and loss moduli showed two distinct transitions corresponding to natural rubber and polystyrene phases, which indicated that the system was not miscible on the molecular level. However, a slight inward shift was observed in the IPNs, with respect to the glass‐transition temperatures (T_g's) of the virgin polymers, showing a certain degree of miscibility or intermixing between the two phases. When the frequency increased from 0.1 to 100 Hz, the T_g values showed a positive shift in all cases. In a comparison of the three initiating systems (dicumyl peroxide, benzoyl peroxide, and azobisisobutyronitrile), the dicumyl peroxide system showed the highest modulus. The morphology of the IPNs was analyzed with transmission electron microscopy. The micrographs indicated that the system was nanostructured. An attempt was made to relate the viscoelastic behavior to the morphology of the IPNs. Various models, such as the series, parallel, Halpin–Tsai, Kerner, Coran, Takayanagi, and Davies models, were used to model the viscoelastic data. The area under the linear loss modulus curve was larger than that obtained by group contribution analysis; this showed that the damping was influenced by the phase morphology, dual‐phase continuity, and crosslinking of the phases. Finally, the homogeneity of the system was further evaluated with Cole–Cole analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1680–1696, 2003     

Thermal expansion and thermal conductivity of CuGa<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>In<Subscript>x</Subscript>Te<Subscript>2</Subscript> solid solutions

The thermal expansion coefficients and the thermal conductivity of Bridgman-grown crystals of CuGa_1−x In_xTe₂ solid solutions are investigated. It is found that the thermal expansion coefficient varies with x linearly, while the thermal conductivity is minimal when x=0.5. The Debye temperature and the rms dynamic atomic displacements are calculated from experimental data. It is shown that the Debye temperature decreases and the rms displacements in the crystal lattice sharply increase as the In content in the solid solutions grows.     

A simple low-vacuum environmental cell.

The environmental cell device discussed in this paper provides a modest low-vacuum scanning electron microscopy (SEM) capability to a standard SEM without requiring additional pumping. This environmental cell confines a volume of low vacuum in contact with the sample surface using a container that has an aperture for admitting the primary electron beam. The aperture is large enough to permit a limited field of view of the sample, and small enough to limit the outflow of gas into the SEM chamber to that which can be accommodated by the standard SEM pumping system. This environmental cell also functions as a gaseous detector device.     

Generalized Darboux transform in the Ishimori magnet model on the background of spiral structures

The integration procedure based on the generalized Darboux transform is suggested for the Ishimori magnet model. Exact solutions are constructed for the model on the background of spiral structures. The possibility of phase transition in the system is hypothesized.