Ion Flux from the Cathode Region of a Vacuum Arc

This paper reviews the properties of the cathode ion flux generated in the vacuum arc. The structure and distribution of mass erosion from individual cathode spots and the characteristics of current carriers from the cathode region at moderate arc currents are described. An appreciable ion flux (～10% of total arc current) is emitted from the cathode of a vacuum arc. This ion flux is strongly peaked in the direction of the anode, though some ion flux may be seen even at angles below the plane of the cathode surface. The observed spatial distribution of the ion flux is expressed quite well as an exponential function of solid angle. The ion flux is quite energetic, with average ion potentials much larger than the arc voltage, and generally contains a considerable fraction of multiply-charged ions. The average ion potential and ion multiplicity increase significantly for cathode materials with higher arc voltages, but decrease with increasing arc current for a particular material. The main theories concerning ion acceleration in cathode spots are the potential hump theory (PH), which assumes that all ions are created at the same potential, and the gas dynamic theory (GD), which assumes that all ions are created with the same flow velocity. Experimental data on the potentials and energies of individual ions indicates that these theories in their original forms are not quite correct, however extensions or modifications of the PH and GD theories seem very likely to be able to predict correct values for the charge states, potentials, and energies of individual ions.     

Strained layer quantum well semiconductor optical amplifiers: Polarization insensitive amplification

Polarization insensitive optical amplification was demonstrated in newly developed semiconductor optical amplifiers that have strained GalnAsP quantum well structures. We tailored the active region of the quaternary strained layer quantum well structure with a small biaxially tensile strain of 0.2% in the well layers for polarization insensitive operation.     

Bioavailability study of commercial sustained-release preparations of diclofenac sodium in gastrointestinal physiology regulated-dogs.

The gastrointestinal (GI) physiology of beagle dogs was regulated with a combined-treatment of intramuscular pentagastrin (10 micrograms/kg x 2) and intravenous atropine sulfate (0.02 mg/kg x 1). Here, the gastric acidity, the gastric emptying time and the small intestinal transit time in the regulated-dogs were respectively around pH 2, 0.7h and 4h, approximating those in healthy humans. The superiority of the regulated-dogs over the intact dogs was confirmed in comparative bioavailability studies by using two classes of commercial preparations. Both the conventional tablet and the sustained-release capsule of diclofenac sodium exhibited simple and similar average plasma concentration-time curves of free diclofenac in the intact dogs, while the latter preparation is reported to reveal a bimodal plasma curve of the drug in healthy humans. The regulated-dogs, however, permitted a bimodal average plasma pattern of the drug for the capsules due to an approximation of the GI physiology between humans and these classes of the dogs. The combined-treatment of beagle dogs with pentagastrin and atropine sulfate seems to supply a useful animal model in predicting the absorption characteristics of the sustained-release preparations and poor water-soluble drugs.     

The 3-D FEL pulse propagation equation: An analytical treatment in the low-gain and small-signal regime

Summary In this paper we show that the transverse mode evolution of a FEL operating with short pulses can be treated, in the small-signal and low-gain regime, using a relatively simple mathematical technique leading to a potentially fast numerical algorithm. We also point out that analytical solutions can be obtained for the cases where the slippage length is small compared to the longitudinal bunch length.     

Lasers at accelerators—past,present and future

The application of lasers at accelerators is reviewed with emphasis on laser spectroscopy of short-lived isotopes and the determination of nuclear spins, moments, and changes of charge radii in long isotopic chains leading far-off stability. Experimental techniques as well as future directions are discussed.     

Paramagnetic defects in BaTiO3 and their role in light-induced charge transport — Optical studies

On the basis of a previous identification of paramagnetic defects in nominally undoped as grown BaTiO₃ single crystals, we have investigated the changes of the concentrations of these centers and their optical absorptions under illumination with light of varying wavelengths. The most pronounced charge transfers occur by hole ionization of Fe⁴⁺ and — to a lesser extent — of Cr⁵⁺ and Cr⁴⁺. At low temperatures the created holes are trapped in the form of O^–-ions next to Al³⁺ or unknown acceptor defects. Corresponding Fe⁴⁺ and O^– absorptions have been identified.     

Single electron tunneling rates in multijunction circuits

The rate of electron tunneling through normal metal tunnel junctions is calculated for the case of ultrasmall junction capacitances. The so-called Coulomb blockade of electron tunneling at low temperatures is shown to be strongly affected by the external electrical circuit. Under the common experimental condition of a low impedance environment the Coulomb blockade is suppressed for single tunnel junctions. However, a Coulomb gap structure emerges for junctions embedded in a high impedance environment. For a double junction setup a Coulomb blockade of tunneling arises even for low impedance environments due to the charge quantization on the metallic island between the junctions. An approach using circuit analysis is presented which allows to reduce the calculation of tunneling rates in multijunction circuits to those of a single junction in series with an effective capacitance. The range of validity of the socalled local rule and global rule rates is clarified. It is found that the tunneling rate tends towards the global rule rate as the number of junctions is increased. Some specific results are given for a one-dimensional array of tunnel junctions.     

Multilayers as defect barriers

A multilayer structure consisting of undoped GaAs and AlAs layers was incorporated into a buffer layer on GaAs substrates. This reduces the spreading of impurities from the substrate (e.g. tellurium) into layers deposited on top of the multilayer system as observed by SIMS and C/V profiling. Incorporation coefficients for tellurium in GaAs, AlAs and multilayers were calculated.     

The electron current to a Langmuir probe in a flowing high-pressureplasma

The electron current to a Langmuir probe in a moving high-pressure plasma has been measured and analyzed. The plasma is an atmospheric-pressure propane flame, and the probe's speed relative to the plasma was varied from 10 ms^-1 to 30 ms^-1. The current is linearly dependent on the speed and appears to be comprised of two components-one driven by diffusion and the other by convection. A model is devised which can be used to measure the electron density. By comparing the density computed from this model to that measured from the ion current, it has been possible to measure the electron mobility in the flame gases. The value obtained by the authors is in good agreement with theoretical calculations found in the literature