ANALYSIS OF A PIEZOELECTRIC MULTIMORPH IN EXTENSIONAL AND FLEXURAL MOTIONS

Impedance and admittance matrices are presented for the analysis of the beam-type piezoelectric multimorph (PM). Each piezoelectric layer is polarized in the thickness direction. The stacking sequence can be arbitrary, and both the extensional and flexural motions are considered. The variational principle is used for deriving the lumped conjugate parameters: two mechanical ports for the extensional motion, four mechanical ports for the flexural motion, and m electrical ports for the m piezoelectric layers. The resonance and antiresonance frequencies are then easily calculated from the admittance matrices. For the case of all the piezoelectric layers either in series or parallel connection, them +6 ports reduce to the seven ports, and its impedance and admittance matrices are presented. The present methods are applied to the cantilevered PM and their electromechanical behavior is studied. The tip trajectory of the cantilevered piezomotor is also investigated using the presented matrices. It is found that the present methods are very effective in analyzing the multilayer piezoelectric transducers.     

Laser induced copper electroless plating on polyimide with Q-switch Nd:YAG laser

The results of laser induced deposition of copper on polyimide substrate from copper electrolyte solution are reported. Unlike most work reported in the literatures where CW Ar⁺ lasers were used, a second harmonic (532 nm wavelength) Q-switch Nd:YAG laser was used for our experiments. The deposition process was conducted by laser-catalyzing of the polyimide surface and subsequent photothermal-accelerated reduction of copper-complex ions in an alkaline reducing environment. The characteristics of the deposited copper line were investigated in terms of laser beam scanning speed, and the number of scans. The surface morphology and chemical composition of the deposited copper were analyzed using field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDX). The optimum processing conditions have been identified. The copper deposit was found to adhere well to the substrate.     

A Modified Quasi-Newton Method for Structured Optimization with Partial Information on the Hessian

This paper develops a modified quasi-Newton method for structured unconstrained optimization with partial information on the Hessian, based on a better approximation to the Hessian in current search direction. The new approximation is decided by both function values and gradients at the last two iterations unlike the original one which only uses the gradients at the last two iterations. The modified method owns local and superlinear convergence. Numerical experiments show that the proposed method is encouraging comparing with the methods proposed in [4] for structured unconstrained optimization Presented at the 6th International Conference on Optimization: Techniques and Applications, Ballarat, Australia, December 9–11, 2004     

Time delay as a key to apoptosis induction in the p53 network

A feedback mechanism that involves the proteins p53 and mdm2, induces cell death as a controlled response to severe DNA damage. A minimal model for this mechanism demonstrates that the response may be dynamic and connected with the time needed to translate the mdm2 protein. The response takes place if the dissociation constant k between p53 and mdm2 varies from its normal value. Although it is widely believed that it is an increase in k that triggers the response, we show that the experimental behaviour is better described by a decrease in the dissociation constant. The response is quite robust upon changes in the parameters of the system, as required by any control mechanism, except for few weak points, which could be connected with the onset of cancer. Received 8 May 2002 / Received in final form 9 July 2002 Published online 17 September 2002     

ω-meson photoproduction on nucleons in the near-threshold region

The European Physical Journal A - The ω-meson photoproduction, γ + p→p + ω, is studied in the framework of a model, containing π-meson exchange in t-channel and...     

Segregation in the Falicov--Kimball Model

The Falicov–Kimball model is a simple quantum lattice model that describes light and heavy electrons interacting with an on-site repulsion; alternatively, it is a model of itinerant electrons and fixed nuclei. It can be seen as a simplification of the Hubbard model; by neglecting the kinetic (hopping) energy of the spin up particles, one gets the Falicov–Kimball model. We show that away from half-filling, i.e. if the sum of the densities of both kinds of particles differs from 1, the particles segregate at zero temperature and for large enough repulsion. In the language of the Hubbard model, this means creating two regions with a positive and a negative magnetization. Our key mathematical results are lower and upper bounds for the sum of the lowest eigenvalues of the discrete Laplace operator in an arbitrary domain, with Dirichlet boundary conditions. The lower bound consists of a bulk term, independent of the shape of the domain, and of a term proportional to the boundary. Therefore, one lowers the kinetic energy of the itinerant particles by choosing a domain with a small boundary. For the Falicov- Kimball model, this corresponds to having a single “compact” domain that has no heavy particles. Received: 21 June 2001 / Accepted: 4 January 2002     

Pseudomeasure character of the ultraspherical semigroups

We prove that the diffusion semigroups generated by the second order differential ultraspherical (Gegenbauer) operator are pseudomeasure operators.     

A Noninvasive, on Wafer Method to Determine the Intrinsic Stress of a Polymer Layer

The method described in this paper allows an investigator to determine the intrinsic stress of a polymer layer in a way that does not result in damage to devices or test structures. The method requires that a small area of the polymer be released from the substrate to form a diaphragm. The diaphragm is stimulated with acoustic white noise and the diaphragm movement is monitored with a laser vibrometer. The first few resonance frequencies of the diaphragm are obtained using a laser vibrometer and then those frequencies are used to calculate the membrane intrinsic bi-axial tension.     

De-mixing dynamics of a binary liquid system in a controlled-pore glass

The European Physical Journal E - The temperature-induced microphase separation of the binary liquid system iso-butyric acid+heavy water (iBA + D2O) in a mesoporous silica glass (CPG-10-75) of...     

Analysis of tunable diode-laser spectra of Q(J,0) lines in CH3F near 1475 cm using a multispectrum fitting technique

We have analyzed the methyl fluoride ^RQ(J,0)Q branch lines located near 1475 cm⁻¹ using a simultaneous multi-spectrum fitting technique. In this analysis we have used previously recorded diode-laser data in which we collected many data points covering only one or two Q branch lines in a particular run. The analysis consists of simultaneously fitting 57 spectra collected with numerous pressure and path length conditions for all absorption lines. The data are concatenated to create one continuous spectrum of the Q branch. We have determined the intensity and self-broadened widths at 296 K for 23 ^RQ(J,0) lines.