Preparation and Crystal Structure of La3ReO8

The crystal structure of La₃ReO₈, prepared at 1425°C, is reported to be different from a previous result on a preparation at 900°C (BAUD et al., 1979). The high temperature modification crystallizes in the monoclinic space group P2₁/m with a = 7.757(1), b = 7.777(1), c = 5.928(1) Å, γ = 111.1°, Z = 2. The structure was solved by Patterson and Fourier methods from single crystal diffractometer data and refined to final R(F) = 0,073. The structure consists of isolated, distorted ReO₆ octahedra and double chains of edge-shared La₄O tetrahedra.     

The influence of “two-phase” synthesis conditions on blown film extrusion of LDPE

LDPE synthesized under two-phase conditions is known to have a good balance of blown film properties. Good optical properties and high impact strength are characteristic for two-phase LDPE grades. In order to obtain systematic information, LDPE was synthesized at several different pressures with two different melt index levels. Blown film was extruded at different output rates and melt temperatures. The influence on haze and dart drop impact was studied. Two-phase conditions were found to improve haze and dart drop impact and the improvement was impressive, especially for the low melt index grades. By increasing the output rate, the dart drop values were further improved. The influence of melt temperature on dart drop impact goes through an optimum and overall haze decreases with increasing melt temperature. For films made from two-phase grades, dart drop impact decreases as internal haze increases. For corresponding internal haze values, the films made from single-phase grades have lower dart drop values and they are somewhat scattered.     

Application of the chugaev reaction for the quantitative determination of ecdysones

Summary The spectrophotometric characteristics of the products of the Chugaev reaction with ecdysones have been studied. Methods have been proposed for determination of ecdysterone and viticosterone E in an artificial mixture and of ecdysterone in extracts of plant raw material by thin-layer chromatography followed by the Chugaev reaction.A. V. Palladin Institute of Biochemistry, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 227–230, March–April, 1977.     

Kinetic study of copper(II) complexation with 9-ethyl-3-carbazolecarboxaldehyde-thiosemicarbazone and kinetic-spectrophotometric determination of copper(II)

The kinetics of complexation reaction of Cu(II) with 9-ethyl-3-carbazolecarboxaldehyde-thiosemicarbazone (ECCAT) has been examined spectrophotometrically. The ligand was synthesized for the first time. The complexation reaction was carried out in a DMF-water medium at 35°C. The complex has maximum absorbance at 393 nm. Kinetic and activation parameters of the complexation reaction were calculated by the Arrhenius and Eyring equations using the data obtained from investigating the effect of temperature on reaction rates under the specified conditions. We also proposed reaction rate equations. Based on the studied complexation reaction, a simple kinetic method for the spectrophotometric determination of copper(II) has been developed. The calibration graphs are linear in the concentration range 0.2–1.9 μg/mL. The species that caused interference were investigated. The text was submitted by the authors in English.     

Is laser-ablation-ICP-MS an alternative to solution analysis of solid samples?

The basic obstacles for the general use of laser-ablation(LA)-ICP-MS in analytical laboratories are connected with its reproducibility and calibration. A mathematical relation deduced from the correlation function of the analytical signals allows the estimation of the number of craters needed for representative analyses. The procedure was applied to different samples such as manganese crusts and soils. The ion intensities of the major elements in the manganese crusts and nodules were used as internal standards, improving relative standard deviations by factors between 2 and 3. Selected samples of wood and manganese crusts were analyzed by LA-ICP-MS and the results compared with those obtained by solution ICP-MS. The agreement of the values is within the 95% confidence limits. Powdered reference materials and, in the case of wood analysis, cellulose doped with standard solutions were used for the calibration.     

On concentration self-quenching of chromium phosphorescence in K3[Cr x Co1−x (CN)6] mixed crystals

The self-quenching of chromium phosphorescence in K₃[Cr_xCo₁-x(CN)₆] mixed crystals has been studied in the range of very high chromium concentration and a minimum in emission quantum yield has been found at about 80% Cr. Comparison of the Cr emission intensities from K₃[Cr(CN)₆] doped with 1% of various impurities suggests that the impurity quenching observed in the range 90 to 100% Cr may be a result of the site asymmetry introduced by the impurity. It is suggested that at least two mechanisms of self-quenching are operative in this concentration range and the nature of these is discussed in relationship to present theories of radiationless transitions.

---

Zusammenfassung Die Eigenlöschung der Cr(III)-Phosphoreszenz wurde in K₃[Cr_xCo₁-x(CN)₆]-Mischkristallen im Bereich hoher Cr-Konzentrationen untersucht. Die Quantenausbeuten der Emission zeigten ein Minimum bei etwa 80% Cr. Ein Vergleich der Lumineszenzintensitäten von K₃[Cr(CN)₆] mit 1% verschiedener Zusätze läßt vermuten, daß die im Bereich von 90–100 % Cr beobachtete Löschung von einer durch die Verunreinigung verursachten Gitterstörung herrührt. — Es wird angenommen, daß in dem untersuchten Konzentrationsbereich mindestens zwei Mechanismen der Eigenlöschung wirksam sind, die anhand der gegenwärtigen Theorien der strahlungslosen Übergänge diskutiert werden.

---

Résumé L'auto étouffement du chrome phosphorescent à partir de K₃[Cr_xCo₁-x(CN)₆], cristaux mélanges avait été étudié dans la région de très haute concentration de chrome et un minimum d'émission quantique, il en résultait environ 80% Cr. Comparé à l'intensité d'émission de chrome à partir de K₃[Cr(CN)₆] contaminé par 1% de diverses impuretés indique que l'étouffement d'impureté qui était observé dans la région de 90 à 100% Cr, peut être le résultat de l'emplacement assimétrique introduit par l'impureté. — II a été suggéré qu'au moins deux mécanismes d'auto étouffement sont à l'oeuvre dans cette région de concentration et leur nature décrite en relation avec les présentes théories de transitions sans radiation.

---

---

Dedicated to the memory of Professor Hans-Ludwig Schläfer.     

Zur Ermittlung und rechnerischen Überprüfung thermodynamischer Daten aus experimentell gefundenen Werten, 10. Mitt.: Zur Frage der Parameterzahl und Fehlerverteilung bei einigen Rechenansätzen für binäre thermodynamische Systeme

Zusammenfassung Es wird eine vergleichende Untersuchung über die Anwendungsmöglichkeit zweier dreiparametriger und zweier zweiparametriger Ansätze angestellt. Die Bestimmung der Konstanten erfolgt nach der Methode der kleinsten Quadrate, die entstehenden Fehlerquadratsummen werden als Funktion der Iterationszahl dargestellt und verglichen. Ebenso wird mit den Verbesserungen _i und den mittleren Fehlern der einzelnen Parameter verfahren. Es ergibt sich, daß der Ansatz vonWilson für stark assoziierende Systeme mit nahezu horizontaler Grenztangente die kleinste Fehlerverteilung aufweist. Die beiden dreiparametrigen Ansätze vonRedlich-Kister und vonMusil-Breitenhuber zeigen sich für das Systemn-Hexan-Methylamin besser geeignet als für die Systeme Benzol-Methanol und CCl₄-Methanol. Die Problematik der Parameterzahl wird an Hand der Fehlerverteilung bei den Ansätzen vonMB undRK aufgezeigt und diskutiert.Das Programm wurde in der Programmiersprache FORTRAN erstellt und mit der UNIVAC-490-Computer-Anlage des Grazer Rechenzentrums gerechnet.

---

Four thermodynamical statements are tested with regard to their applicability to binary systems, two statements having three and two only two parameters. The least square method ofGauss shows that theWilson statement has the smallest dispersion of errors for systems with nearby horizontal boundary tangent. [vv], _i and are shown as functions of the number of iterations. The problem of the parameters' number is shown and discussed by means of the dispersion of errors for theMusil-Breitenhuber (MB) andRedlich-Kister (RK)-statements.The programme is written in FORTRAN and has been used the UNIVAC-490-Computer of the Graz Computer Centre.

---

---

Mit 5 Abbildungen

---

Herrn Professor Dr.Robert Fischer zum 65. Geburtstag in Dankbarkeit und Verehrung gewidmet.

---

bis 6. Mitt.:F. Gölles, Mh. Chem.92, 981 (1961);93, 191, 201 (1962);94, 1108 (1963);95, 1656 (1964);96, 1366 (1965);7. bis 9. Mitt.:F. Gölles undA. Höpfner, Mh. Chem.97, 368, 911 (1966);99, 230 (1968).     

Verwendung schneller Reaktorneutronen zur raschen und zerst?rungsfreien Spurenanalyse, insbesondere von Sauerstoff

Zusammenfassung Der intensive Fluß schneller Neutronen, wie er von Kernreaktoren geliefert wird, kann für eine rasche und zerstörungsfreie, aktivierungs-analytische Bestimmung einer Vielzahl von Elementen verwendet werden. Bei manchen Elementen läßt sich sogar bei der Aktivierung mit schnellen Reaktorneutronen eine im Vergleich zur Aktivierungsanalyse mit thermischen Neutronen tiefere Erfassungsgrenze erreichen. Werden die Proben in einem schnellen, halbautomatischen Rohrpostsystem zum Reaktorkern befördert, können auch sehr kurzlebige Radionuklide gemessen werden. Besonders Sauerstoff läßt sich über die Kernreaktion ¹⁶O(n, p)¹⁶N sehr empfindlich bestimmen, wobei die hochenergetischen -Quanten des 7,2 sec Stickstoff-16 gemessen werden. Es können so bis zu 10 ppm Sauerstoff in vielen Arten von Analysenproben erfaßt werden. Das halbautomatische Analysensystem, das mit Hilfe einer schnellen Rohrpost die Durchführung rascher und zerstörungsfreier Aktivierungs-analysen im Forschungsreaktor München erlaubt, wird beschrieben. Die Verwendung des Systems zur Sauerstoffanalyse und die damit zusammenhängenden Probleme werden genauer besprochen.

---

Summary The intense fast-neutron fluxes, which are available in nuclear reactors, can be used for rapid and non-destructive activation analysis of many elements. Some elements have even superior detection limits for activation with fast reactor neutrons compared to reactor thermal-neutron activation. Short-lived radionuclides can also be measured using a fast pneumatic tube system. Oxygen can be determined by the nuclear reaction ¹⁶O(n, p)¹⁶N initiated by fast reactor neutrons counting the high-energy gamma rays of the 7.4 sec nitrogen-16. The method is suitable for determining as little as 10 ppm of oxygen in many types of analytical samples. The fast transfer system, which is used in the Munich research reactor for rapid and non-destructive activation analysis is described. The use of the transfer-system for oxygen activation analysis and problems associated with oxygen analysis are discussed.

     

New colorimetric and fluorimetric methods for the determination of 1,4-cyclohexanedione

1,4-Cyclohexanedione has been determined by reaction with o-phthalaldehyde in sulfuric acid. The determinations depend on the formation of a dicationic salt of pentacenequinone. A sensitive and highly selective fluorimetric method is recommended, but the reaction can also be used spectrophotometrically. Many organic compounds, as well as the isomers of 1,4-cyclohexanedione, give negative results. A spot test is described which can be used for quick preliminary investigations of complex mixtures for I,4-cyclohexanedione.     

Plutonium Activity Ratios in Plankton: New Evidence of Hold-Up Time in Irish Sea Sediments

The determination of activity ratios for radioisotopes of different half-lives can be used to estimate transit times from a point source to locations further away. For conservative elements, this time is approximately equivalent to the net hydrological transport. However, for non-conservative elements such as plutonium, the additional influence of biogeochemical processes decreases the net transport time. In this study, ²⁴¹Pu and ^239,240Pu concentrations in Irish Sea plankton samples, collected in May 1994, were determined and the ²⁴¹Pu/^239,240Pu ratios calculated. Plutonium-239,240 was measured using a standard method by ion exchange chromatography and alpha counting, and ²⁴¹Pu was determined by liquid scintillation counting using the disk-supported technique. The latter showed some methodological problems, which are briefly discussed. The ²⁴¹Pu/^239,240Pu ratios gave an estimate of the "transit time" from Sellafield to the different sampling points. In fact, this time represents the age of plutonium in plankton, i.e., the time lag between release from Sellafield and detection at the different sampling stations. The mean plutonium age was 17±2 years (n = 10) and 18.6±0.8 years (n = 13) in phytoplankton and zooplankton, respectively. The spatial distribution was reasonably homogeneous over the Irish Sea. The assimilation-elimination processes of plutonium in plankton are rather rapid. Therefore, it may be assumed that, in this time scale, the plutonium concentrations were in equilibrium with surrounding waters. Thus, it is concluded that plutonium was rather old because resuspension-sedimentation processes had occurred that delayed its transport within the Irish Sea. Therefore, the age of plutonium in plankton represented the hold-up time of plutonium in the sediments from the Irish Sea.