Nanocrystalline ceramic films for efficient conversion of light into electricity

Transparent nanocrystalline films of oxide semiconductors such as TiO₂ and Fe₂O₃ have been prepared on a conducting glass support employing a sol-gel procedure. The films are composed of nanometer-sized particles sintered together to allow for percolative charge carrier transport. The internal surface of these films is very high, roughness factors of the order of 1000 being readily obtained. Electric polarization was applied for forward and reverse biasing of the films and the resulting optical changes have been analyzed to derive their flat band potential. Band gap excitation of such nanocrystalline semiconductors produces electron-hole pairs which migrate through the film to be collected as electric current. Steady state photolysis and time resolved laser techniques have been applied to scrutinize the mechanism of light induced charge separation within the nanostructure. When derivatized with a suitable chromophore, TiO₂ films give extraordinary efficiencies for the conversion of incident photons into electric current, exceeding 90% for certain transition metal complexes within the wavelength range of their absorption band. The underlying physical principles of these astonishing findings will be discussed. Exploiting this discovery, we have developed a new type of photovoltaic device whose overall light to electric energy conversion yield is 10% under simulated AM 1.5 solar radiation.     

Trace determination of Tl, Cu, Pb, Cd, and Zn in specimens of the limnic environment using isotope dilution mass spectrometry with thermal ionization

Within the framework of the German Environmental Specimen Bank program, Tl, Cu, Pb, Cd and Zn were determined in homogenized materials from the limnic environment using Isotope Dilution Mass Spectrometry (IDMS) with thermal ionization. The analytical procedures which were developed for the trace metal analysis of bioindicator and sediment samples are described in detail. Results obtained in bream, mussels (Dreissena polymorpha) and sediments of Lake Constance/Estuary of Constance in the sampling years 1981, 1985, 1988, 1990, 1992 and 1993 are discussed and compared with those of bream from the lakeland district of Born-hoeved/Lake Belau and from the River Saar as well as from reference materials.     

Model calculations of interface segregation in dilute systems

Using a discrete model for the segregation kinetics based on the Darken theory of diffusion and on the regular solution model (RSM), one and two dimensional simulations of interface segregation in binary and ternary systems have been performed. The aim of the calculations was to investigate the kinetics of segregation sequences in ternary systems, the segregation kinetics in discrete systems during the initial phase and finally the kinetics of surface segregation in the region of a grain boundary intersected by the surface.     

Resonance ionization spectroscopy for trace analysis and fundamental research

Resonance ionization spectroscopy (RIS) and its combination with mass spectrometry (RIMS) have grown to become powerful techniques, which offer high sensitivity as well as elemental and isotopic selectivity. The principles of RIS and RIMS are introduced; they primarily concern the analysis of the optical spectra for the choice of efficient excitation schemes and the suitable design of the experimental apparatus. Recent applications span from studies of short-lived isotopes at on-line mass separators to a wide variety of trace analysis applications for radioactive isotopes, which can range from measurements of solar neutrino flux to environmental assessment.On leave from Pacific Northwest Laboratory, Richland, USA     

Calibration of depth profiles of microparticles measured with plasma-based secondary neutral mass spectrometry

A gravimetric method is presented for the easy determination of sputter erosion rates for powders, applicable also to non-conducting materials. Measurements of the erosion rates of 22 powders gave an average value of 0.4 nm/s ±50% for bombardment with 400 eV Ar⁺ at 1 mA/cm². The validity of the data has been demonstrated with technical pigments and outdoor aerosol particles.     

ARXPS-analysis and morphology of sputtered nanocrystalline TiC/SiC coatings

ARXPS (angle resolved X-ray photoelectron spectroscopy) measurements are used to obtain informations about surfaces and grain boundaries. Data acquired from nanocrystalline carbidic hard coatings have been employed to establish structural models. Magnetron-sputtered coatings of TiC, SiC and TiC/SiC were examined. In such coatings, partly defective TiC nanocrystallites are surrounded by interfacial carbide. This excess carbon shows a binding state similar to that of doped graphite or fullerenes. X-ray amorphous SiC is found in the residue. On top of sputtered SiC coatings, less oxide and graphite is found as compared to TiC/SiC or TiC coatings.     

Liquid crystalline hexa-amides and side chain polysiloxanes of azacrown [18]-N6

The hexa-4-dodecyloxybenzoyl derivative 1 of azacrown [18]-N₆ was originally reported to have a 'tubular' mesophase on the basis of its large central ring and 6-fold symmetry. Starting in the mesophase, annealing of 1 under a cover slip results in formation of a new crystalline phase that melts directly to an isotropic liquid at the temperature previously observed for the mesophase to isotropic transition. Thus the phase behaviour of 1 is kinetically controlled. The analogous hexa-3,4-bisdodecyloxybenzoyl derivative 2 of azacrown [18]-N₆ has no kinetic limitations to its phase changes and has an enantiotropic columnar liquid crystalline phase. We have synthesized side chain copolysiloxanes with a (CH₂)₁₁ spacer and 75-84 per cent by weight of the same 4-dodecyloxybenzoyl-[18]-N₆ mesogen. The polysiloxanes also display a liquid crystalline phase.     

Octahedral metallo-mesogens of chromium, molybdenum and tungsten with 1,4,7-trisubstituted 1,4,7-triazacyclononane and three carbonyl groups as ligands

Liquid crystalline complexes with chromium, molybdenum and with tungsten as metallic centres are reported. 1,4,7-Trisubstituted 1,4,7-triazacyclononane and three carbonyl groups are coordinated in an octahedral geometry. The observed mesophases are characterized as disordered rectangular columnar of a pyramidic type.     

Kinetic model for hydrocarbon-assisted particulate boron combustion

A kinetic model is presented to describe the high temperature (1800 K < T < 3000 K) surface oxidation of particulate boron in a hydrocarbon combustion environment. The model includes a homogeneous gas-phase B/O/H/C oxidation mechanism consisting of 19 chemical species and 58 forward and reverse elementary reactions, multi-component gas-phase diffusion, and a heterogeneous surface oxidation mechanism consisting of ‘elementary’ adsorption and desorption reaction steps. Thermochemical and kinetic parameters for the surface reactions are estimated from available experimental data and/or elementary transition state arguments. The kinetic processes are treated using a generalized kinetics code, with embedded sensitivity analysis, for the combustion of a one-dimensional (particle radius), spherical particle. Model results are presented for the oxidation of a 200 μm boron particle in a JP-4/air mixture at ambient temperatures of 1400 K and 2000 K. These results include temperature and gas-phase species profiles as a function of radial distance and particle burning rates. © 1994 John Wiley & Sons, Inc.