Ti0.99Pd0.01O2−δ: A New Pt‐free Catalyst for High Rates of H2+O2 Recombination with High CO Tolerant Capacity

A platinum‐free H ₂ /O ₂ recombination catalyst , Ti_0.99Pd_0.01O_2?δ, is synthesized by a solution combustion method where Pd²⁺ ions adsorb protonic H₂^δ+ ion and oxygen on the oxide ion vacancy sites (see picture). The rate of H₂+O₂ recombination at 50 °C is 15 μmoles g^?1 s^?1, which is much higher than that of Pt‐containing catalysts.

     

Mechanistic study on the oxidation of l-phenylalanine by copper(III) in aqueous alkaline medium: a kinetic approach

Abstract  

Oxidation of the amino acid l-phenylalanine by diperiodatocuprate(III) in alkaline medium at constant ionic strength of 0.25 mol dm⁻³ was studied spectrophotometrically at different temperatures (298–313 K). The reaction between diperiodatocuprate(III) and l-phenylalanine in alkaline medium exhibits 1:2 stoichiometry. Intervention of free radicals was observed in the reaction. Based on the observed orders and experimental evidence, a mechanism involving monoperiodatocuprate(III) as the reactive oxidant species has been proposed, proceeding through the formation of a complex and reaction of the intermediate of l-phenylalanine with monoperiodatocuprate(III) to give the products. The products were identified by spot test, infrared (IR), and gas chromatography-mass spectrometry (GC-MS). The reaction constants involved in the different steps of the mechanism were calculated. The activation parameters with respect to the slow step of the mechanism were computed and are discussed. The thermodynamic quantities were determined for different equilibrium steps. The isokinetic temperature was also calculated and found to be 331 K.     

Small-Angle Neutron Scattering Study of Nonionic Surfactant Micelles and Phase Transitions in w/o Microemulsion

The structure of micelles formed by a four component water-in-oil nonionic microemulsion surfactant polyoxyethene (20) sorbitan monoleate (Tween 80), sorbitan monolaurate (Span 20) at ethyl oleate and deuterated water interface have been probed by small-angle neutron scattering (SANS). The total surfactant concentration in each of the samples studied (Tween 80: Span 20) is fixed at 3:2. The deuterated water content is variable at 5–60% w/w. The experimental SANS data from all the seven samples are fit well by spherical micelles interacting with hard sphere potential. Increased deuterated water leads to spherical to lamellar and rod-like micelle geometry featured in the SANS scattering data. The observed change in micelle geometry supports the characterization of phase transition between the self-assembled micelles of the nonionic microemulsion.      

XPES and UVPES studies of iron oxides

X-Ray and uv photoelectron spectra of FeO, Fe₂O₃, and Fe₃O₄ have been studied along with those of a few model compounds. It has been possible to assign distinct bands due to Fe²⁺ and Fe³⁺ in the 3d, 3p, 3s, and 2p bands of Fe₃O₄. The spectra of Fe₃O₄ do not show major changes through the Verwey transition.     

Sol-Gel Microsphere Pelletisation Process for Fabrication of (U,Pu)O2, (U,Pu)C and (U,Pu)N Fuel Pellets for the Prototype Fast Breeder Reactor in India

A “dust-free” sol-gel microsphere pelletisation (SGMP) process has been developed for fabrication of (U,Pu)O₂, (U,Pu)C and (U,Pu)N fuel pellets containing around 15% plutonium for the forthcoming prototype fast breeder reactor (PFBR) in India. The objective was to produce homogeneous sintered pellets of ∼85% T.D. with a predominantly open-pore structure. Hydrated gel-microspheres of UO₃+PuO₂ and UO₃+PuO₂+C have been prepared from nitrate solutions of uranium and plutonium by the “ammonia internal gelation” process, using hexamethylene tetramine (HMTA) as an ammonia generator and silicone oil at 90±1°C as gelation bath. For oxide fuel pellets, the hydrated UO₃+PuO₂ gel-microspheres were calcined at around 700°C in Ar+8% H₂ atmosphere to produce “non-porous”, “free-flowing” and coarse (around 400 micron) microspheres which could be directly pelletised at 550 MPa to green pellets. The mixed oxide pellets were subjected either to low temperature (∼1100°C) oxidative sintering (LTS) in N₂+air containing ∼1500 ppm O₂ or to high temperature (1650°C) sintering, (HTS) in Ar+8% H₂. For monocarbide and mononitride pellets, hydrated gel-microspheres of UO₃+PuO₂+C were subjected to carbothermic synthesis in vacuum (∼1 Pa) and flowing nitrogen (flow rate: 1.2 m³/h) in the temperature range of 1450–1550°C respectively. The monocarbide and mononitride microspheres thus produced were relatively hard and required higher compaction pressure (∼1200 MPa) for making reen pellets which could be sintered to 85% T.D. in Ar+8% H₂ at 1700°C. The sintered oxide, monocarbide and mononitride pellets had a “blackberry” “open” pore microstructure with fine grain size. The microspheres retained their individual identity in the sintered pellets because during sintering densification took place mainly within and not between the microspheres.     

Interaction of carbon monoxide with transition metal surfaces

XPS studies of the interaction of carbon monoxide with surfaces of Fe, Co and Ni indicate that at 300 K, the disproportionation reaction is prominent up to exposures of 10³ L giving rise to high surface concentrations of carbon. At higher exposures and higher temperatures, dissociation of carbon monoxide accompanied by the formation of surface oxide layers becomes more prominent. In the case of copper, disproportionation is prominent up to 10⁴ L even at 500 K followed by dissociation at higher exposures. These results are also supported by Auger spectroscopic studies.     

Natural radioactivity in the soil samples in and around Kudankulam nuclear power plant site

The terrestrial gamma-radiation in soil and sand samples collected around Kudankulam nuclear power plant site, i.e., in Radhapuram Taluk of Tirunelveli District has been measured using NaI(T1) gamma-ray spectrometer. In the soil samples total dose due to three primordial radionuclides lies in the range of 13.1–168.2 nGy/h with a geometric mean of 137.2 nGy/h, which yields an annual effective dose of 0.17 mSv/y. In the sand samples the total dose due to three primordial radionuclides has been found to be in the range of 38.1–1964.4 nGy/h with a geometric mean of 300.8 nGy/h, which gives an annual effective dose of 0.37 mSv/y which is well below the permissible limit (1 mSv).     

Epitaxial oxide thin films by pulsed laser deposition: Retrospect and prospect

Pulsed laser deposition (PLD) is a unique method to obtain epitaxial multi-component oxide films. Highly stoichiometric, nearly single crystal-like materials in the form of films can be made by PLD. Oxides which are synthesized at high oxygen pressure can be made into films at low oxygen partial pressure. Epitaxial thin films of highT _c cuprates, metallic, ferroelectric, ferromagnetic, dielectric oxides, superconductor-metal-superconductor Josephson junctions and oxide superlattices have been made by PLD. In this article, an overview of preparation, characterization and properties of epitaxial oxide films and their applications are presented. Future prospects of the method for fabricating epitaxial films of transition metal nitrides, chalcogenides, carbides and borides are discussed.