Absorption and Capture of Methane into Ionic Liquid

A reversible storage-release process switched by a temperature difference of 10℃around room temperature can be realized. This fast, recyclable, energy efficient, low cost and green system within a wide range of temperature and pressure is reported here for the first time. The system is believed to open up a new route for the storage and homogeneous utilization of methane.     

Micellar solutions of sulfobetaine surfactants in water-ethylene glycol mixtures: surface tension, fluorescence, spectroscopic, conductometric, and kinetic studies

Micellization in water-ethylene glycol (EG) N-dodecyl, N-tetradecyl, and N-hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (SB3-12, SB3-14, and SB3-16, respectively) micellar solutions, with the weight percent of EG changing within the range 0-40, was studied by means of surface tension measurements. Information about the influence of the added EG on the aggregation number of the sulfobetaine micelles and on the polarity of the interfacial region of micelles was obtained through fluorescence and spectroscopic measurements. Surface tension measurements also provide information about the dependence of the surface excess concentration, the minimum area per surfactant molecule, the surface pressure at the cmc, and the standard Gibbs energy of adsorption on the added weight percent of the organic solvent. The Gordon parameter of the water-EG mixtures was also estimated by means of surface tension measurements. The thermodynamic and structural changes originated by the presence of EG control the micellar kinetic effects observed in the reaction methyl 4-nitrobenzenesulfonate + Br(-) occurring in the water-EG sulfobetaine micellar solutions. Information about the distribution of bromide ions between the bulk and micellar pseudophases was obtained through conductivity measurements. The kinetic micellar effects were quantitatively explained by using the pseudophase kinetic model.     

吲哚衍生物与花生酸混合LB膜的制备及结构研究

本文将3-三氰基乙烯基-N-十六烷基吲哚与花生酸混合制成单分子膜。不同摩尔比混合膜的π-A曲线均出现平台,表明膜压缩过程中分子排列相态发生变化。混合LB膜的紫外吸收光谱证明吲哚分子形成聚集体,X-射线衍射结果说明这种聚集体被夹带在花生酸的框架结构中。     

Host-guest complexes of cucubit[8]uril with phenanthrolines and some methyl derivatives

Cucurbituril a molecular container (or host) has a rigid hollow interior cavity which is large enough to accommodate, one or more, smaller molecules (or guests). The cavity is accessible through two carbonyl portal openings. Molecules or guests enter the …     

Simultaneous determination of N-butylscopolamine and oxazepam in pharmaceutical formulations by first-order digital derivative spectrophotometry

A simple method has been developed for the simultaneous determination of N-butylscopolamine bromide and oxazepam in pharmaceutical formulations using first-order digital derivative spectrophotometry. Acetonitrile was selected as the solvent in which both compounds showed well-defined bands. Both analytes showed good stability in this solvent when solutions of the analytes were exposed to light and temperatures between 20 degrees and 80 degrees C. The simultaneous determination of both drugs was performed by the zero-crossing method at 226.0 and 257.0 nm for N-butylscopolamine and oxazepam, respectively. The linear range of determination was found to be 2.5 x 10(-7) to 8.0 x 10(-5) mol/L for N-butylscopolamine and 7.1 x 10(-8) to 8.0 x 10(-5) mol/L for oxazepam. A very good level of repeatability (relative standard deviation) of 0.2% was observed for N-butylscopolamine and oxazepam. The ingredients commonly found in pharmaceutical formulations do not interfere. The proposed method was applied to the determination of these drugs in pharmaceutical formulations (capsules).     

Photocatalytic degradation of methylene blue on Fe3+-doped TiO2 nanoparticles under visible light irradiation

Fe³⁺-doped TiO₂ composite nanoparticles with different doping amounts were successfully synthesized using sol-gel method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and ultravioletvisible spectroscopy (UV-Vis) diffuse reflectance spectra (DRS). The photocatalytic degradation of methylene blue was used as a model reaction to evaluate the photocatalytic activity of Fe³⁺/TiO₂ nanoparticles under visible light irradiation. The influence of doping amount of Fe³⁺ (ω: 0.00%–3.00%) on photocatalytic activities of TiO₂ was investigated. Results show that the size of Fe³⁺/TiO₂ particles decreases with the increase of the amount of Fe³⁺ and their absorption spectra are broaden and absorption intensities are also increased. Doping Fe³⁺ can control the conversion of TiO₂ from anatase to rutile. The doping amount of Fe³⁺ remarkably affects the activity of the catalyst, and the optimum efficiency occurs at about the doping amount of 0.3%. The appropriate doping of Fe³⁺ can markedly increase the catalytic activity of TiO₂ under visible light irradiation. __________ Translated from Journal of Northwest Normal University (Natural Science), 2006, 42(6): 55–56 [译自: 西北师范大学学报(自然科学版)]     

取代乙酸配体对乙炔二聚反应催化剂性能的影响

研究了取代乙酸配体作为Ｎｉｅｕｌａｎ催化剂对乙炔二聚反应性能的影响。结果表明，不同功能结构数目的影响，结果表明，不同功能结构数目的的氨羧配体均使催化剂的选择性提高。乙炔转化率略有下降，巯基乙酸配体的加入，则改变了乙炔二聚反应的机理，得到以乙醛为主的产物。     

微波辅助快速制备2D/1D ZnIn2S4/TiO2 S型异质结及其光催化制氢性能

The threat and global concern of energy crises have significantly increased over the last two decades. Because solar light and water are abundant on earth, photocatalytic hydrogen evolution through water splitting has been considered as a promising route to produce green energy. Therefore, semiconductor photocatalysts play a key role in transforming sunlight and water to hydrogen energy. To date, various photocatalysts have been studied. Among them, TiO₂ has been extensively investigated because of its non-toxicity, high chemical stability, controllable morphology, and high photocatalytic activity. In particular, 1D TiO₂ nanofibers (NFs) have attracted increasing attention as effective photocatalysts because of their unique 1D electron transfer pathway, high adsorption capacity, and high photoinduced electron–hole pair transfer capability. However, TiO₂ NFs are considered as an inefficient photocatalyst for the hydrogen evolution reaction (HER) because of their disadvantages such as a large band gap (~3.2 eV) and fast recombination of photoinduced electron–hole pairs. Therefore, the development of a high-performance TiO₂ NF photocatalyst is required for efficient solar light conversion. In recent years, several strategies have been explored to improve the photocatalytic activity of TiO₂ NFs, including coupling with narrow-bandgap semiconductors (such as ZnIn₂S₄). Recently, microwave (MW)-assisted synthesis has been considered as an important strategy for the preparation of photocatalyst semiconductors because of its low cost, environment-friendliness, simplicity, and high reaction rate. Herein, to overcome the above-mentioned limiting properties of TiO₂ NFs, we report a 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction synthesized through a microwave (MW)-assisted process. Herein, the 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction was constructed rapidly by using in situ 2D ZnIn₂S₄nanosheets decorated on 1D TiO₂ NFs. The loading of ZnIn₂S₄ nanoplates on the TiO₂ NFs could be easily controlled by adjusting the molar ratios of ZnIn₂S₄ precursors to TiO₂ NFs. The photocatalytic activity of the as-prepared samples for water splitting under simulated solar light irradiation was assessed. The experimental results showed that the photocatalytic performance of the ZnIn₂S₄/TiO₂ composites was significantly improved, and the obtained ZnIn₂S₄/TiO₂ composites showed increased optical absorption. Under optimal conditions, the highest HER rate of the ZT-0.5 (molar ratio of ZnIn₂S₄/TiO₂= 0.5) sample was 8774 μmol·g^-1·h^-1, which is considerably higher than those of pure TiO₂ NFs (3312 μmol·g^-1·h^-1) and ZnIn₂S₄nanoplates (3114 μmol·g^-1·h^-1) by factors of 2.7 and 2.8, respectively. Based on the experimental data and Mott-Schottky analysis, a possible mechanism for the formation of the S-scheme heterojunction between ZnIn₂S₄ and TiO₂ was proposed to interpret the enhanced HER activity of the ZnIn₂S₄/TiO₂heterojunctionphotocatalysts.      

铜在HOPG上电沉积过程的现场ECSTM研究

用自制的电化学扫描隧道显微镜（ＥＣＳＴＭ）现场研究Ｃｕ在ＨＯＰＧ上的电沉积过程．结果表明Ｃｕ在ＨＯＰＧ上的电沉积为三维成核的过程．当电位较低或Ｃｕ２＋离子浓度较低时，铜在本体金属生长主要沿着台阶方向．过电位较高时，铜的成核数目增加，沉积层的晶粒有所细化．同时，非现场ＥＣＳＴＭ比较研究表明，ＳＴＭ针尖对针尖局部区域的电沉积起屏蔽作用，针尖所在区域Ｃｕ的沉积速度比其它区域明显减小     

Interfacial properties of self-organized TiO<Subscript>2</Subscript> nanotubes studied by impedance spectroscopy

The semiconductor properties of the interface TiO₂/electrolyte in high organized porous oxide structures were analyzed by means of impedance spectroscopy near the flat band potential. The impedance and capacitance studies performed on the as-anodized and thermally treated samples (anatase) indicate the presence of a duplex structure formed by (1) the oxide at the bottom of the pores and (2) the walls of pores with different donor densities and surface state concentrations.