Dielectric and tunable properties of highly (110)-oriented (Ba<Subscript>0.65</Subscript>Sr<Subscript>0.35</Subscript>)TiO<Subscript>3</Subscript> thin films deposited on Pt/LaNiO<Subscript>3</Subscript>/SiO<Subscript>2</Subscript>/Si substrates

Highly (110)-oriented Ba_0.65Sr_0.35TiO₃ films were deposited on Pt/LaNiO₃/SiO₂/Si substrates by a sol–gel method. It was found that the (110)-preferred Pt film was very effective for growing (110)-oriented ferroelectric films with perovskite structure. The as-grown Ba_0.65Sr_0.35TiO₃ films showed good dielectric properties with dielectric constant and loss tangent tan δ = 0.026. Excellent dielectric tunability was also achieved in the (110)-oriented films. With applying an electric field of 230 kV/cm at 100 kHz, the dielectric tunability and the figure of merit can reach up to 63.4% and 16, respectively. These results indicate that the highly (110)-oriented Ba_0.65Sr_0.35TiO₃ film is a promising candidate for the applications in microwave tunable devices.     

Layer-by-layer growth of polar MgO(111) ultrathin films

By alternate deposition of Mg and exposure of O2, layer-by-layer growth, polar MgO(111) ultrathin films with Mg-terminated or O-terminated surfaces have been successfully fabricated on Mo(110) substrate. The surface geometric structure and electronic structures of the polar MgO(111) films were investigated using surface analysis techniques including low-energy electron diffraction and photoelectron emission and electron energy loss spectroscopies. The results indicate that the O-terminated surface is of an insulating character, while for Mg-terminated surface, a prominent new surface state at 2-3 eV and appreciable density of states near Fermi level have been observed. The polar oxide films provide ideal model surfaces for further investigation of support-particle system.     

Hemin-histamine-montmorillonite clay conjugate as a model biocatalyst to mimic natural peroxidase

We successfully synthesized the first hemin-montmorillonite bio-conjugate with an amino acid residue to mimic natural peroxidase enzyme. Histamine was intercalated in montmorillonite by cation exchange, then a hemin molecule was loaded onto the histamine-montmorillonite with an adsorption capacity of 7.0 mg g-1. The hemin-histamine-montmorillonite conjugate shows high peroxidase activity as indicated by the oxidation of guaiacol, which is attributed to the activation of hemin by Fe–N complex formation between the imidazole group in histamine and the iron ion in the hemin molecule. Temperature- dependent peroxidase activity for this synthesized biomimetic material indicates that raising the reaction temperature could significantly enhance the activity of the conjugate. The biomimetic catalyst has good reusability; nearly 100% activity can be retained after three cycles. Because montmorillonite clay is widely distributed in the environment, this material offers great potential for in situ and ex situ remediation of many organic contaminants in surface/subsurface soils.     

氢化物发生–原子吸收光谱法测定铅粉中痕量砷、锑

建立氢化物发生–原子吸收光谱法联用测定铅粉中痕量砷、锑的方法。试样用稀硝酸溶解,用5%抗坏血酸溶液作为砷(Ⅴ)、锑(Ⅴ)的预还原剂,5%的硫脲溶液作为其它元素的掩蔽剂,选用1%硼氢化钠溶液作为还原剂,氢化物反应在10%盐酸介质中进行。在优化的试验条件下,砷、锑的质量浓度在0~20 ng/m L范围内与吸光度线性相关,相关系数r2分别为砷0.999 6,锑0.993 8,方法的检出限分别为砷0.40 ng/m L,锑0.75 ng/m L。砷、锑测定结果的相对标准偏差分别为4.96%,6.27%(n=6),铅粉样品加标回收率分别为砷87.6%,锑79.3%。该方法准确可靠,可用于测定铅粉中痕量砷、锑。     

Palladium-catalyzed arylation of cyanamides

The cross-coupling of alkyl cyanamides with a number of aryl, heteroaryl, and vinyl halide and pseudohalide coupling partners has been developed via a modification of Pd-catalyzed amidation methods. The reactions proceed selectively under mild conditions with reasonable reaction times in moderate to excellent yields.     

The influence of high dielectric constant core on the activity of core-shell structure electrorheological fluid

The core-shell structural dielectric particles are applied widely in the electrorheological (ER) fluids. The properties of the dielectric core are critical factors influencing their ER activity. In this paper, we successfully synthesized two kinds of core-shell hydroxyl titanium oxalate (TOC) particles with SiO(2) and TiO(2) as core, respectively. The obtained core-shell structural SiO(2)-TOC and TiO(2)-TOC particles were well-dispersed spherical nanoparticles with ideal morphology and a narrow size distribution. Under DC electric fields, the TiO(2)-TOC ER fluid showed notable ER activity with a yield stress of about 96 kPa (at 4 kV/mm), which is 3 times of that SiO(2)-TOC ER fluid and outclassed the yield stress of the TOC ER fluid. The dielectric spectra indicated that the higher dielectric constant of TiO(2) core induces the stronger interaction between the neighboring particles, which contribute to the enhancement of ER activity.     

A Novel Spectrophotometric Method for the Determination of Levodopa with the Detection System of Potassium Ferricyanide‐Fe(III)

In this paper, a novel method has been established to determine levodopa with the detection system of potassium ferricyanide‐Fe(III). In the presence of potassium ferricyanide, it has been demonstrated that Fe(III) is reduced to Fe(II) by levodopa at pH 4.0. In addition, the in situ formed Fe(II) reacts with potassium ferricyanide to form soluble prussian blue (KFe^III[Fe^II(CN)₆]). Beer's law is obeyed in the range of levodopa concentrations of 0.01–4.00 μg mL^?1 at the maximal absorption wavelength of 735 nm. The linear regression equation is A = 0.0082 + 0.61365 C (μg mL^?1) with a correlation coefficient of 0.9996. The detection limit (3σ/k) is 9 ng mL^?1, and R.S.D. is 0.73% (n = 11). Moreover, the apparent molar absorption coefficient of indirect determination of levodopa is 1.2 × 10⁵ Lmol^?1cm^?1. The parameters with regard to determination are optimized, and the reaction mechanism is discussed. This method has been successfully applied to determine levodopa in pharmaceutical, serum and urine samples. Analytical results obtained with this novel assay are satisfactory.     

基于仿生膜的功能化单纳米通道在分析化学中的应用

灵感来源于蛋白质离子通道的仿生功能化单纳米通道,已逐渐成为一种成熟的单分子检测技术和离子整流器。功能化纳米通道包括两种:基因改造的蛋白质纳米通道和固体加工的纳米通道。常用的固体纳米通道有三种:在纳米氮化硅或石墨烯上用聚焦离子束(FIB)或电子束(FEB)轰击得到的纳米通道,化学腐蚀聚合物薄膜中的重金属离子轨迹得到的锥形纳米通道和拉制毛细管或激光刻蚀得到的玻璃纳米孔。相对于蛋白质纳米通道,固态的人工纳米通道具有更优越的机械稳定性,并可用于各种功能基团的修饰。经过近十年的发展,包括蛋白质纳米通道在内的各种仿生的纳米通道已广泛用于对小分子、蛋白质和聚合物等其他一些对象的定性和定量检测。本综述详细介绍了近年来国内外该领域的发展,并对未来的发展方向作了简要的展望。