类金钢石非晶碳薄膜的光吸收和光致发光研究

我们用激光轰击石墨靶成功地制备出类金刚石无氢非晶碳薄膜.测量了光学吸收、光致发光及其随入射光强度的变化关系.结果表明,这种薄膜具有类金刚石的性质,光学带隙在1.67-2.25eV,发光在可见光区呈宽带结构.低激发强度下发光强度超线性变化,而在高激发强度下则为线性发光.我们用非成对载流子复合的模型对结果给出了合理的解释.用带尾态饱和的模型解释了发光峰值随激发光强增加而蓝移的现象.     

稳态锁模产生4ps激光脉冲

首次利用ＧａＡｓ光电导开关，控制Ｎｄ：ＹＬＦ激光器腔内Ｑ值，实现稳态锁模，获得脉宽和能量稳定性极高的４ｐｓ激光脉冲。     

Two New Ionone Derivatives from Rhododendron przewalskii Maxim

Two new ionone derivatives,named rhododendrone and rhododendronside,were isolated from the alcohoilc extract of the aerial parts of Rhododendron przwalskii Maxim.Their structures were elucidated on the basis of spectroscopic analysis.     

求解无线传感器网络路由问题的蚁群最优化算法及其收敛性

首先将无线传感器网络的路由问题转化成求解最小Steiner树问题,然后给出了求解无线传感器网络路由的蚁群优化算法,并对算法的收敛性进行了证明．最后对找到最优解后信息素值的变化进行了分析．即在限制信息素取值的条件下,当迭代次数充分大时,该算法能以任意接近于1的概率找到最优解,并且当最优解找到后,最优树边上的信息素单调增加,而最优解以外边上的信息素在有限步达到最小值．     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

Kinetic behaviour of aluminum naphthenate/benzene system in process of gelation and degradation

The kinetic behaviour of aluminum naphthenate/benzene system in the process of gelation and degradation was systematically studied. The results obtained from the kinetic experiments indicated that the gelation stage was in accordance with a kinetic model of an auto-catalytic first-order reaction, and the degradation stage was a simple first-order reaction. The rate constants in these two stages at various temperaturs were measured. And the determined apparent activation energies for the gelation stage and for the degradation stage are 27.5±2.0 and 37.7±2.3 kJ/mol, respectively.     

Characterization of ceramic PVD thin films on AZ31 magnesium alloys

Ceramic thin films have been widely used to protect the metal substrate as coatings in the past years. In order to improve the poor corrosion resistance of AZ31 magnesium alloy, the study in this paper used the electron beam evaporation method to prepare ceramic PVD films on its surface with TiO₂ and Al₂O₃ as donors, respectively. Atomic force microscopy (AFM), scanning electron microscope (SEM), energy dispersive X-ray spectrometer (EDS), Auger electron spectroscopy (AES) and X-ray diffraction (XRD) were used to investigate the surface morphology, composition and microstructure of the thin films. Both films deposited on AZ31 took on compact top surface morphologies and grew as amorphous structures on substrate. AES test not only showed that films compositions deviated the standard stoichiometric ratios, but also found that element Mg diffused into films and existed as magnesium oxide in the TiO_x film as well as the AlO_x film. In the electrochemical corrosion test, the AlO_x coating on AZ31 exhibited the largest electrochemical impedance in a 3.5% NaCl solution. But it did not show better corrosion resistance than others for the poorer adhesion. Even if its thickness was small, the TiO_x coating on AZ31 exhibited the best corrosion resistance in this study. According to the observation and analysis, the damage of these films on AZ31 in aggressive solutions was mainly due to the existence of pores, microcracks, vacancies and poor adhesion between coating and substrate.     

Erratum: Yan Guo. Boltzmann diffusive limit beyond the Navier‐Stokes approximation,Communications on Pure and Applied Mathematics (2006) 59(5) 626‐687

The original article to which this erratum refers was published in Communications on Pure and Applied Mathematics Comm Pure Appl Math(2006)59(5) 626 .