Microenvironment Effects in Electrocatalysis: Ionic‐Liquid‐Like Coating on Carbon Nanotubes Enhances the Pd‐Electrocatalytic Alcohol Oxidation

A new catalyst consisting of ionic liquid (IL)‐functionalized carbon nanotubes (CNTs) obtained through 1,3‐dipolar cycloaddition support‐enhanced electrocatalytic Pd nanoparticles (Pd@IL(Cl^?)‐CNTs) was successfully fabricated and applied in direct ethanol alkaline fuel cells. The morphology, structure, component and stability of Pd@IL(Cl^?)‐CNTs were systematic characterized by transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), Raman spectra, thermogravimetric analysis (TGA) and X‐ray diffraction (XRD). The new catalyst exhibited higher electrocatalytic activity, better tolerance and electrochemical stability than the Pd nanoparticles (NPs) immobilized on CNTs (Pd@CNTs), which was ascribed to the effects of the IL, larger electrochemically active surface area (ECSA), and greater processing performance. Cyclic voltammograms (CVs) at various scan rates illustrated that the oxidation behaviors of ethanol at all electrodes were controlled by diffusion processes. The investigation of the different counteranions demonstrated that the performance of the IL‐CNTs hybrid material was profoundly influenced by the subtly varied structures of the IL moiety. All the results indicated that the Pd@IL(Cl^?)‐CNTs catalyst is an efficient anode catalyst, which has potential applications in direct ethanol fuel cells and the strategy of IL functionalization of CNTs could be available to prepare other carbonaceous carrier supports to enhance the dispersivity, stability, and catalytic performance of metal NPs as well.     

Gadolinium(III)‐Hydroxy Ladders Trapped in Succinate Frameworks with Optimized Magnetocaloric Effect

Two kinds of inorganic gadolinium(III)‐hydroxy “ladders”, [2×n] and [3×n], were successfully trapped in succinate (suc) coordination polymers, [Gd₂(OH)₂(suc)₂(H₂O)]_n ? 2n H₂O ( 1 ) and [Gd₆(OH)₈(suc)₅(H₂O)₂]_n ? 4n H₂O ( 2 ), respectively. Such coordination polymers could be regarded as alternating inorganic–organic hybrid materials with relatively high density. Magnetic and heat capacity studies reveal a large cryogenic magnetocaloric effect (MCE) in both compounds, namely (ΔH=70 kG) 42.8 J kg^?1 K^?1 for complex 1 and 48.0 J kg^?1 K^?1 for complex 2 . The effect of the high density is evident, which gives very large volumetric MCEs up to 120 and 144 mJ cm^?3 K^?1 for complexes 1 and 2 , respectively.     

Synthesis and Morphology Control of AM‐6 Nanofibers with Tailored ‐V‐O‐V‐ Intermediates

Microporous vanadosilicates with octahedral VO₆ and tetrahedral SiO₄ units, better known as AM‐6, have been hydrothermally synthesized with different morphologies by controlling the Na/K molar ratio of the initial gel mixtures. The morphology of the AM‐6 materials changed from bulky cube to nanofiber aggregates as the Na/K molar ratio decreased from 1.9 to 0.2. Raman spectroscopy revealed that the VO₃^? intermediate species plays an important role in the formation of the nanofiber morphology. The orientation of ‐V‐O‐V‐ chains in nanofiber aggregates was examined by confocal polarized micro‐Raman spectroscopy. It was found that these aggregates are assemblies of short ‐V‐O‐V‐ chains perpendicular to the axis of nanofibers. The obtained AM‐6 nanofibers greatly increase the exposed proportion of V? O terminals, and thus improve the catalytic performance.     

Fast,Reversible Lithium Storage with a Sulfur/Long‐Chain‐Polysulfide Redox Couple

The cathodic reactions in Li–S batteries can be divided into two steps. Firstly, elemental sulfur is transformed into long‐chain polysulfides (S₈?Li₂S₄), which are highly soluble in the electrolyte. Next, long‐chain polysulfides undergo nucleation reaction and convert into solid‐state Li₂S₂ and Li₂S (Li₂S₄?Li₂S) by slow processes. As a result, the second‐step of the electrochemical reaction hinders the high‐rate application of Li–S batteries. In this report, the kinetics of the sulfur/long‐chain‐polysulfide redox couple (theoretical capacity=419 mA h g^?1) are experimentally demonstrated to be very fast in the Li–S system. A Li–S cell with a blended carbon interlayer retains excellent cycle stability and possesses a high percentage of active material utilization over 250 cycles at high C rates. The meso‐/micropores in the interlayer are responsible for accommodating the shuttling polysulfides and offering sufficient electrolyte accessibility. Therefore, utilizing the sulfur/long‐chain polysulfide redox couple with an efficient interlayer configuration in Li–S batteries may be a promising choice for high‐power applications.     

Rapid,General Synthesis of PdPt Bimetallic Alloy Nanosponges and Their Enhanced Catalytic Performance for Ethanol/Methanol Electrooxidation in an Alkaline Medium

We have demonstrated a rapid and general strategy to synthesize novel three‐dimensional PdPt bimetallic alloy nanosponges in the absence of a capping agent. Significantly, the as‐prepared PdPt bimetallic alloy nanosponges exhibited greatly enhanced activity and stability towards ethanol/methanol electrooxidation in an alkaline medium, which demonstrates the potential of applying these PdPt bimetallic alloy nanosponges as effective electrocatalysts for direct alcohol fuel cells. In addition, this simple method has also been applied for the synthesis of AuPt, AuPd bimetallic, and AuPtPd trimetallic alloy nanosponges. The as‐synthesized three‐dimensional bimetallic/trimetallic alloy nanosponges, because of their convenient preparation, well‐defined sponge‐like network, large‐scale production, and high electrocatalytic performance for ethanol/methanol electrooxidation, may find promising potential applications in various fields, such as formic acid oxidation or oxygen reduction reactions, electrochemical sensors, and hydrogen‐gas sensors.     

Expanded Organic Building Units for the Construction of Highly Porous Metal–Organic Frameworks

Two new organic building units that contain dicarboxylate sites for their self‐assembly with paddlewheel [Cu₂(CO₂)₄] units have been successfully developed to construct two isoreticular porous metal–organic frameworks (MOFs), ZJU‐35 and ZJU‐36, which have the same tbo topologies (Reticular Chemistry Structure Resource (RCSR) symbol) as HKUST‐1. Because the organic linkers in ZJU‐35 and ZJU‐36 are systematically enlarged, the pores in these two new porous MOFs vary from 10.8 Å in HKUST‐1 to 14.4 Å in ZJU‐35 and 16.5 Å in ZJU‐36, thus leading to their higher porosities with Brunauer–Emmett–Teller (BET) surface areas of 2899 and 4014 m² g^?1 for ZJU‐35 and ZJU‐36, respectively. High‐pressure gas‐sorption isotherms indicate that both ZJU‐35 and ZJU‐36 can take up large amounts of CH₄ and CO₂, and are among the few porous MOFs with the highest volumetric storage of CH₄ under 60 bar and CO₂ under 30 bar at room temperature. Their potential for high‐pressure swing adsorption (PSA) hydrogen purification was also preliminarily examined and compared with several reported MOFs, thus indicating the potential of ZJU‐35 and ZJU‐36 for this important application. Studies show that most of the highly porous MOFs that can volumetrically take up the greatest amount of CH₄ under 60 bar and CO₂ under 30 bar at room temperature are those self‐assembled from organic tetra‐ and hexacarboxylates that contain m‐benzenedicarboxylate units with the [Cu₂(CO₂)₄] units, because this series of MOFs can have balanced porosities, suitable pores, and framework densities to optimize their volumetric gas storage. The realization of the two new organic building units for their construction of highly porous MOFs through their self‐assembly with [Cu₂(CO₂)₄] units has provided great promise for the exploration of a large number of new tetra‐ and hexacarboxylate organic linkers based on these new organic building units in which different aromatic backbones can be readily incorporated into the frameworks to tune their porosities, pore structures, and framework densities, thus targeting some even better performing MOFs for very high gas storage and efficient gas separation under high pressure and at room temperature in the near future.     

Collective Total Synthesis of Englerin A and B,Orientalol E and F,and Oxyphyllol: Application of the Organocatalytic [4+3] Cycloaddition Reaction

The concise collective total synthesis of englerin A and B, orientalol E and F, and oxyphyllol has been accomplished in 10–15 steps, with the total synthesis of orientalol E and oxyphyllol being achieved for the first time. The success obtained was enabled by the realization of the [4+3] cycloaddition reaction of 9 and 10 . Other features of the synthesis include 1) the intramolecular Heck reaction to access the azulene core, 2) the epoxidation–S_N2′ reduction sequence to access the allylic alcohol, 3) the efficient regioselective and stereoselective formal hydration of the bridging C?C bond in the synthesis of englerins, and 4) the late‐stage chemo‐ and stereoselective C? H oxidation in the synthesis of orientalol E. The total synthesis of these natural products has enabled the structural revision of oxyphyllol and established the absolute stereochemical features of the organocatalytic [4+3] cycloaddition reaction. The identification of 5 as the natural product oxyphyllol, the success in converting 5 to orientalol E, along with the fact that englerins and oxyphyllol were isolated from plants of the same genus Phyllanthus gives support to our proposed biosynthetic pathways. This work may enable detailed biological evaluations of these natural products and their analogues and derivatives, especially of their potential in the fight against renal cell carcinoma (RCC).     

Direct grafting modification of pulp in ionic liquids and self-assembly behavior of the graft copolymers

In this paper, a novel biodegradable biomass-based amphiphile was prepared by direct grafting copolymerization of dissolved pulp with hydrophobic poly (l-lactide) in ionic liquids BmimCl. The molecular structures of the obtained copolymers were confirmed with ¹H-NMR, ¹³C-NMR and 2D HSQC NMR, and their physical properties were studied by TGA and XRD analysis. The self-assembly behaviors of these amphiphilies in aqueous solution was characterized by fluorescence spectrum and their critical micelle concentrations (CMC) were determined to be in the range of 0.326–0.062 mg/mL. TEM observations and DLS analysis revealed that the pulp-derived micelles had spherical and uniform morphology and small diameters (25–125 nm). It was also found that the surface tension of these copolymers solution firstly decreased dramatically with increasing concentration and then approached to a plateau value when the concentration was above their CMC value. MTT assay showed that the pulp-derived amphiphilic micelles exhibited good biocompatibility, which informed that these micelles could be expected to be used in biological regions, especially for the hydrophobic drug delivery system.     

基于FCS的海水痕量元素的通用测定平台

为了对海水痕量营养盐与重金属进行测定,基于FCS的设计思想,采用流动注射分光光度法研制了具有自适应外界设备、快速组建多种仪器及全数字化通信等特点的软硬件一体化的通用测定平台。平台以ARM(S3C2416)处理器为核心,Linux为操作系统,LCD作为人机交互显示,触摸屏或者USB鼠标完成输入控制,构成完整的嵌入式工控机系统;采用CAN总线并制定CAN应用层协议管理设备,提高了系统的可靠性及抗干扰能力。实际测试和应用证明,该平台自动化程度高,通用性、重用性及可扩展性均较强,可组建成亚硝氮、硝氮、氨氮、活性磷、铁等多种痕量元素的实验室、船载和原位分析系统,检测限为nmol/L级别。平台对样品的测试准确度与商品专用仪器无显著性差异。     

High‐Order Soliton Solution of Landau–Lifshitz Equation

The Landau–Lifshitz equation is analyzed via the inverse scattering method. First, we give the well‐posedness theory for Landau–Lifshitz equation with the frame of inverse scattering method. The generalized Darboux transformation is rigorous considered in the frame of inverse scattering transformation. Finally, we give the high‐order soliton solution formula of Landau–Lifshitz equation and vortex filament equation.