Correlations of13C chemical shifts and geometry modifications

The effect of geometry modifications of¹³C chemical shifts has been investigated in a small subset of molecules using both LO-INDO and Gaussian 70 (4–31) calculations. The Gaussian calculations, while known to give poor absolute shifts, compare well to the reparameterized semi-empirical INDO determinations in calculated shift changes. In virtually all cases the signs of the shift changes were found to be opposite to that of the changes in the calculated electronic energy.     

Evaluation of contributions to the uncertainty of cholesterol determination in human serum by means of gas chromatography/(quadrupole-) mass spectrometry

 The uncertainty budget of the determination of cholesterol in a reference material (freeze-dried human serum) by isotope dilution mass spectrometry (IDMS) was evaluated. Measurements were run on a GC/quadrupole MS. A nested experimental design combined with a corresponding model for the analysis of variance (ANOVA) revealed the components making up the total uncertainty of the determinations. The coefficient of variation (CV) of the sole GC/MS-step was 0.47%, while that of the sample preparation including hydrolyzation, extraction and derivatization was 0.84%. This made the in-laboratory (overall) CV 0.96%. In addition, there was a vial-to-vial effect of 1.00% probably due to both inhomogeneity of the pooled material and lack of reproducibility of the filling procedure (including freeze drying) of the supplier as well as the reconstitution prior to use in the laboratory. These contributions sum up to an overall CV of a single determination of about 1.4%. Received: 17 October 1996/Revised: 14 November 1996/Accepted: 18 November 1996     

The hyperfine structure and nuclear moments of some neutron-deficient as isotopes

The hyperfine structure of the¹³⁹La II line 5d ^{2 3} F→5d4f ³ F ₄ ⁰ atλ=579.8 nm has been investigated by means of collinear laser spectroscopy on a fast La⁺ beam. AmongΔF=0, ±1 hyperfine transitions,gDF=±2 transitions have been observed. An interpretation of theseΔF=±2 transitions as well as their relative line strengths is given by means of a three-quantum process.     

Protein dynamics tightly connected to the dynamics of surrounding and internal water molecules.

Proteins are key components of biological cells. For example, enzymes catalyze biochemical reactions, membrane transporters are responsible for uptake and release of critical and superfluous components from the cell environment, and structural proteins are responsible for the stability of the cell wall and cytoskeleton. Many of the diverse protein functions involve dynamic transitions ranging from small local atomic displacements up to large allosteric conformational changes. In any conformation, proteins are in contact with the universal solvent medium of cells, water. Water not only surrounds proteins but is often an integral part of proteins and also is involved in key mechanistic steps. This Minireview discusses recent experimental and theoretical results on the role of water for protein dynamics and function.     

New Entrance Optics for Solar Spectral UV Measurements

The investigation of the impact of solar UV radiation on the biosphere requires spectral measurements of solar UV radiation of high accuracy. However, the accuracy of current measurements is limited, and this can partly be attributed to the entrance optics of the instruments used for these examinations. The angular response of spectro-radiometers measuring spectral global UV irradiance should be given by the cosine of the incidence angle. In-tercomparison campaigns have shown that deviations from this ideal cosine response lead to uncertainties in solar measurements of more than 10%. Here we present recently developed entrance optics that reduce these uncertainties to ±4% in the UV. The new entrance optics have been characterized with respect to their angular response, transmission, weather durability, fluorescence and dependence of the angular response on wavelength and polarization. Solar spectroradiometric measurements carried out with the new optics were compared with simultaneously performed measurements of a second spectroradiometer that was equipped with a conventional diffuser. The deviations of up to 12% between both systems are quantitatively explained to within 3%.     

The effect of macromolecular architecture in nanomaterials: a comparison of site isolation in porphyrin core dendrimers and their isomeric linear analogues

The influence of macromolecular architecture on the physical properties of polymeric materials has been studied by comparing poly(benzyl ether) dendrons with their exact linear analogues. The results clearly confirm the anticipation that dendrimers are unique when compared to other architectures. Physical properties, from hydrodynamic volume to crystallinity, were shown to be different, and in a comparative study of core encapsulation in macromolecules of different architecture, energy transduction from the polymer backbone to a porphyrin core was shown to be different for dendrimers as compared to that of isomeric four- or eight-arm star polymers. Fluorescence excitation revealed strong, morphology dependent intramolecular energy transfer in the three macromolecular isomers investigated. Even at high generations, the dendrimers exhibited the most efficient energy transfer, thereby indicating that the dendritic architecture affords superior site isolation to the central porphyrin it surrounds.     

Metallorganische Verbindungen des Kupfers XIII. Kupfer(I)-chlorid-Komplexe winkelgespannter Cycloheptine Synthesen und Röntgenstrukturanalysen

The strained cycloheptynes 2a, 2b and 2c react with copper(I) chloride to form the dinuclear complexes [CuCl(cycloheptyne)]₂ 3a, 3b and 3c respectively. X-ray diffraction studies on all three compounds 3 show an increase in strength of the copper-alkyne bond with increasing deformation of the alkyne moiety from the ideal 180°. Thus going from the least strained alkyne (2c) to the most strained one (2a), the Cu-C bond lengths in the corresponding complexes decrease from 197.5 pm (3c) to 194.9 pm (3a). The C≡C-C angles increase from 145.6° (3a) over 147.4° (3b) to 151.6° (3c).

Zusammenfassung

Die gespannten Cycloheptine 2a, 2b und 2c reagieren mit Kupfer(I)—chlorid unter Bildung der zweikernigen Komplexe [CuCl(cycloheptin)]₂ 3a, 3b und 3c. Röntgenstrukturanalysen von allen drei Verbindungen 3 zeigen, daβ die Stärke der Kupfer—Alkin-Bindung zunimmt je mehr das ganze Alkinsystem vom idealen 180°-Winkel abweicht. Geht man vom am wenigsten gespannten Alkin (2c) zum gespanntesten (2a), so nehmen die Cu-C-Bindungslängen in den entsprechenden Komplexen von 197.5 pm (3c) auf 194.9 pm (3a) ab. Die C≡C-C-Winkel werden von 145.6° (3a) über 147.4° (3b) nach 151.6° (3c) hin gröβer.     

Stress-Strain Behavior of Shape Memory Polymers by 1WE Method: Application to Tecoflex®

Thermomechanical cycles including programming, cooling, unloading and heating to trigger the 1WE were examined for a shape memory polymer (SMP), Tecoflex® (TFX EG-72D). Cycles were performed at 60°C with 50% and 225% strains and the recovery time of 10 min. Strains evolving with time were estimated during the thermomechanical treatments for the total 44 cycles using 50% strains and the total 50 cycles using 225% strains. Recovery ratios for 50% strains and 225% were also estimated. It turns out that programming, cooling, unloading and heating to trigger the 1WE causes an increase of irreversible strain and is associated with a corresponding decrease of the intensity of the 1WE in particular during the first thermomechanical cycles. In parallel scanning electron microscopic study using secondary electron imaging shows a very slight wavy surface structure evolved during cycling.     

Efficient polymer passivation of ligand‐stripped nanocrystal surfaces

Water‐dispersible, polymer‐wrapped nanocrystals are highly sought after for use in biology and chemistry, from nanomedicine to catalysis. The hydrophobicity of their native ligand shell, however, is a significant barrier to their aqueous transfer as single particles. Ligand exchange with hydrophilic small molecules or, alternatively, wrapping over native ligands with amphiphilic polymers is widely employed for aqueous transfer; however, purification can be quite cumbersome. We report here a general two‐step method whereby reactive stripping of native ligands is first carried out using trialkyloxonium salts to reveal a bare nanocrystal surface. This is followed by chemically directed immobilization of a hydrophilic polymer coating. Polyacrylic acids, with side‐chain grafts or functional end groups, were found to be extremely versatile in this regard. The resulting polymer‐wrapped nanocrystal dispersions retained much of the compact size of their bare nanocrystal precursors, highlighting the unique role of monomer side‐chain functionality to serve as effective, conformal ligation motifs. As such, they are well poised for applications where tailored chemical functionality at the nanocrystal's periphery or improved access to their surfaces is desirable. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,Crystal Structure,and Selected Properties of [Au(S2CNH2)2]SCN: A Precursor for Gold Macro-Needles Consisting of Gold Nanoparticles Glued by Graphitic Carbon Nitride

A new preparation route is developed for the synthesis of needle-like crystals of [Au(S₂CNH₂)₂]SCN, which avoids disproportionation of the Au^I salt used as a starting material. In the crystal structure, the two crystallographically independent Au^III centers are in a square-planar environment of two S₂CNH₂ ligands. The Hirshfeld surface analysis reveals the presence of noncovalent intermolecular S⋅⋅⋅S interactions, which are essential for the spatial arrangement of the molecules. Density functional theory (DFT) calculations including dispersion and damping corrections result in a unit cell volume very close to the value determined experimentally. Thermal decomposition in an inert atmosphere generates black needles with lengths of up to 500 μm. X-ray powder diffraction and pair distribution function analyses demonstrate that the needles are composed of nanosized crystals with a volume-weighted average domain size of 20(1) nm. According to results of X-ray photoemission experiments, the black needles are covered by a nitrogen-rich carbon nitride with composition near (CN)₂N. ¹³C solid-state NMR investigations indicate that two different carbon species are present, with signals corresponding well to heptazine units as in melon and triazine units as in poly(triazin imide) type compounds. Scanning transmission electron microscopy tomography evidences that the needles are composed of slightly elongated nanoparticles.