Controlled fed-batch fermentations of dilute-acid hydrolysate in pilot development unit scale

Inhibitors formed during wood hydrolysis constitute a major problem in fermenting dilute-acid hydrolysates. By applying a fed-batch technique, the levels of inhibitory compounds may be held low, enabling high ethanol productivity. In this study, a previously developed fed-batch strategy was modified and implemented for use in pilot development unit (PDU) scale. The rate of total gas formation, measured with a mass flow meter, was used as input variable in the control algorithm. The feed rate in the PDU-scale experiments could be properly controlled based on the gas evolution from the reactor. In fed-batch experiments utilizing TMB 3000, an inhibitor-tolerant strain of Saccharomyces cerevisiae, close to 100% of the hexoses in the hydrolysate was converted.     

Photochemically induced dynamic nuclear polarization in photosystem I of plants observed by 13C magic-angle spinning NMR

Photochemically induced dynamic nuclear polarization (photo-CIDNP) has been observed in photosystem I of spinach by (13)C magic angle spinning solid-state NMR under continuous illumination with white light. An almost complete set of chemical shifts of the aromatic ring carbons of a single Chl a molecule has been obtained which is assigned to the P2-cofactor of the primary electron donor P700. Since all light-induced (13)C NMR signals appear to be emissive, a predominance of the three-spin mixing mechanism over the differential decay mechanism is proposed. The origin of the strong contribution of the three-spin mixing mechanism and the differences with photosystem II are discussed.     

Thermally induced sign change of Soret coefficient for dilute and semidilute solutions of poly(N-isopropylacrylamide) in ethanol

We studied the thermal diffusion behavior of poly(N-isopropylacrylamide) (PNiPAM) in ethanol in a temperature range from T = 14.0 degrees C to T = 40.0 degrees C by means of thermal diffusion forced Rayleigh scattering. The obtained Soret coefficient S(T) of PNiPAM was positive for lower temperatures (T < 34 degrees C), while S(T) showed a negative value for higher temperatures (T > 34 degrees C). This means PNiPAM molecules move to the cold side for temperatures T < 34 degrees C, whereas they move to the warm side for T > 34 degrees C. This is the first nonaqueous polymeric system for which a sign change with temperature has been observed. We performed static and dynamic light scattering experiments in the same temperature range. The second virial coefficient determined from dilute solutions by static light scattering (SLS) was positive in the comparable temperature range. The results of SLS for the semidilute solution showed a strong repulsion among PNiPAM chains which was enhanced by increasing temperature. These results imply that the observed thermally induced sign change of S(T) does not depend on the intermolecular interactions among PNiPAM chains.     

Determination of steroid hormones in blood by GC–MS/MS

This paper presents the development, optimization and validation of a methodology to determine nine key steroid hormones (viz. pregnenolone, progesterone, dehydroepiandrosterone, androstenedione, testosterone, dihydrotestosterone, estrone, 17α-estradiol and 17β-estradiol) expressed in the steroidogenesis in biological fluids. The analytical method allows for the determination of steroid hormones in blood plasma and serum down to 0.08–0.16 ng/mL for estrogens, 0.20–0.36 ng/mL for androgens and 0.36–0.43 ng/mL for progestagens. These limits of detection were obtainable using a two-step solid-phase clean-up for fractionation and elimination of interfering lipids (fatty acids, phospholipids, glycerides and sterols) from the steroid hormones. The accuracy of the method was 50–112% in the range 0.10 to 2.00 ng/mL.     

Stereo‐Inversion in the (4R)‐γ‐Decanolactone Synthesis by Saccharomyces cerevisiae: (2E,4S)‐4‐Hydroxydec‐2‐enoic Acid Acts as a Key Intermediate

Methyl (2E,4R)‐4‐hydroxydec‐2‐enoate, methyl (2E,4S)‐4‐hydroxydec‐2‐enoate, and ethyl (±)‐(2E)‐4‐hydroxy[4‐²H]dec‐2‐enoate were chemically synthesized and incubated in the yeast Saccharomyces cerevisiae. Initial C‐chain elongation of these substrates to C₁₂ and, to a lesser extent, C₁₄ fatty acids was observed, followed by γ‐decanolactone formation. Metabolic conversion of methyl (2E,4R)‐4‐hydroxydec‐2‐enoate and methyl (2E,4S)‐4‐hydroxydec‐2‐enoate both led to (4R)‐γ‐decanolactone with >99% ee and 80% ee, respectively. Biotransformation of ethyl (±)‐(2E)‐4‐hydroxy(4‐²H)dec‐2‐enoate yielded (4R)‐γ‐[²H]decanolactone with 61% of the ²H label maintained and in 90% ee indicating a stereoinversion pathway. Electron‐impact mass spectrometry analysis (Fig. 4) of 4‐hydroxydecanoic acid indicated a partial C(4)→C(2) ²H shift. The formation of erythro‐3,4‐dihydroxydecanoic acid and erythro‐3‐hydroxy‐γ‐decanolactone from methyl (2E,4S)‐4‐hydroxydec‐2‐enoate supports a net inversion to (4R)‐γ‐decanolactone via 4‐oxodecanoic acid. As postulated in a previous work, (2E,4S)‐4‐hydroxydec‐2‐enoic acid was shown to be a key intermediate during (4R)‐γ‐decanolactone formation via degradation of (3S,4S)‐dihydroxy fatty acids and precursors by Saccharomyces cerevisiae.     

Transition‐Metal‐Free Formal Sonogashira Coupling and α‐Carbonyl Arylation Reactions

Transition‐metal‐free formal Sonogashira coupling and α‐carbonyl arylation reactions have been developed. These transformations are based on the nucleophilic aromatic substitution (S_NAr) of β‐carbonyl sulfones to electron‐deficient aryl fluorides, producing a key intermediate that, depending on the reaction conditions, gives the aromatic alkynes or α‐aryl carbonyl compounds. The development of these reactions is presented and, based on investigations under basic and acidic conditions, mechanisms have been proposed. To develop the formal Sonogashira coupling further, a milder, two‐step protocol is also disclosed that expands the reaction concept. The scope of these reactions is demonstrated for the synthesis of Sonogashira and α‐carbonyl arylated products from a range of electron‐deficient aryl fluorides with a variety of functional groups and aryl‐, heteroaryl‐, alkyl‐, and alkoxy‐substituted sulfone nucleophiles. These transition‐metal‐free reactions complement the metal‐catalyzed versions in terms of substitution patterns, simplicity, and reaction conditions.     

Design and Sensing Properties of a Self‐Assembled Supramolecular Oligomer

Supramolecular polymers are a class of macromolecules stabilized by weak non‐covalent interactions. These self‐assembled aggregates typically undergo stimuli‐induced reversible assembly and disassembly. They thus hold great promise as so‐called functional materials. In this work, we present the design, synthesis, and responsive behavior of a short supramolecular oligomeric system based on two hetero‐complementary subunits. These “monomers” consist of a tetrathiafulvalene‐functionalized calix[4]pyrrole (TTF‐C[4]P) and a glycol diester‐linked bis‐2,5,7‐trinitrodicyanomethylenefluorene‐4‐carboxylate (TNDCF), respectively. We show that when mixed in organic solvents, such as CHCl₃, CH₂ClCH₂Cl, and methylcyclohexane, supramolecular aggregation takes place to produce short oligomers stabilized by hydrogen bonding and donor–acceptor charge‐transfer (CT) interactions. The self‐associated materials were characterized by ¹H NMR and UV/Vis/NIR absorption spectroscopy, as well as by concentration‐ and temperature‐dependent absorption spectroscopy and dynamic light scattering (DLS) analyses of both the monomeric and oligomerized species. The self‐associated system produced from TTF‐C[4]P and TNDCF exhibits a concentration‐dependent aggregation behavior typical of supramolecular polymers. Further support for the proposed self‐assembly came from theoretical calculations. The fluorescence emitting properties of TNDCF are quenched under conditions that promote the formation of supramolecular aggregates containing TTF‐C[4]P and TNDCF. This quenching effect has been utilized as a probe for the detection of substrates in the form of anions (i.e., chloride) and nitroaromatic explosives (i.e., 1,3,5‐trinitrobenzene). Specifically, the addition of these substrates to mixtures of TTF‐C[4]P and TNDCF produced a fluorescence “turn‐on” response.