Hierarchical Tubular Structures Grown from the Gel/Liquid Interface

Three dimensional hierarchical materials are widespread in nature but are difficult to synthesize by using self‐assembly/organization. Here, we employ a gel–liquid interface to obtain centimeter‐long ～100 μm diameter tubes with complex mineral wall structures that grow from the interface into solution. The gel, made from gelatin, is loaded with metal chloride salt, whereas the solution is a high pH anion source. Tubes were obtained with a range of cations (Ca²⁺, Sr²⁺, Ba²⁺, Cu²⁺, and Zn²⁺) and anions (CO₃^2? and PO₄^3?). The crystalline phases found in the tube walls corresponded to expectations from solution chemistries and phase solubilities. The growth mechanism is found to be akin to that of chemical gardens. The divalent cations modify the strength of the gelatin gel in a manner that involves not only simple electrostatic screening, but also ion‐specific effects. Thus, tubes were not obtained for those ions and/or concentrations that significantly changed the gel’s mechanical structure. At high Cu²⁺ loading, for example, vertical convection bands, not Liesegang bands, were observed in the gels.     

Label‐Free Measurements of the Diffusivity of Molecules in Lipid Membranes

An important and characteristic property of a cell membrane is the lateral mobility of protein molecules in the lipid bilayer. This has conventionally been measured by labeling the molecules with fluorescent markers and monitoring their mobility by different fluorescence‐based techniques. However, adding the label to the studied molecule may affect the system, so it is an assumption in almost all experiments that the measured mobility of the biomolecule with its label is the same as that of the unlabeled molecule. However, this assumption is rarely tested due to a lack of suitable methods. In this work, a new technique to perform label‐free diffusivity measurements is developed and used to measure the effect of the label for two common protein–lipid systems: 1) streptavidin (SA) coupled to a supported lipid bilayer (SLB) through biotinylated lipids and 2) the extracellular part of the T‐cell adhesion protein CD2, coupled to an SLB through histidine tags to nickel‐chelating lipids. A measurable (≈12 %) decrease in diffusivity is found for both labeled proteins, even though the molecular mass of the label is almost 100 times smaller than those of the proteins (≈50 kDa). The results illustrate the importance of being able to study different biophysical properties of cell membranes and their mimics without relying on fluorescent labels, especially if fluorescent labeling is difficult or is expected to affect the nature of the intermolecular interactions being studied.     

Strong Coupling and Laser Action of Ladder‐Type Oligo(p‐phenylene)s in a Microcavity

We investigate the coupling of ladder‐type quarterphenyl to the photon modes of a dielectric ZrO_x/SiO_x microcavity at ultraviolet wavelengths. For a relatively long cavity (≈10 μm) with high‐reflectivity mirrors (0.998), optically pumped laser action is demonstrated in the weak‐coupling regime. We observe single‐mode operation with a threshold of 0.4 mJ cm^?2. Strong coupling is achieved by using a short λ/2 cavity. We find pronounced anti‐crossing features of the molecular (0,0) and (0,1) vibronic transitions and the cavity mode in angle‐dependent reflectivity measurements providing Rabi splittings of (90±10) meV. All these features occur spectrally resonant to the exciton transition of ZnO demonstrating the potential of ladder‐type oligo(p‐phenylene)s for the construction of inorganic/organic hybrid microcavities.     

Adsorption of Large Hydrocarbons on Coinage Metals: A van der Waals Density Functional Study

The adsorption of organic molecules onto the close‐packed facets of coinage metals is studied, and how accurately adsorption heights can be described by using recent advances of the van der Waals density functional (vdWDF), with optPBE/vdWDF, optB86b/vdWDF, vdWDF2, and rev/vdWDF2 functionals is illustrated. The adsorption of two prototypical aromatic hydrocarbons is investigated, and the calculated adsorption heights are compared to experimental literature values from normal incident X‐ray standing wave absorption and a state‐of‐the‐art semi‐empirical method. It is shown that both the optB86b/vdWDF and rev/vdWDF2 functionals describe adsorption heights with an accuracy of 0.1 Å, compared to experimental values, and are concluded as reliable methods of choice for related systems.     

Spray Deposition Synthesis of Locally Ordered Mesoporous Polycrystalline Titania Films at Low Temperature

A low-temperature spray deposition synthesis was developed to prepare locally hexagonally ordered mesoporous titania films with polycrystalline anatase pore walls in an evaporation-induced self-assembly process. The titania film preparation procedure is conducted completely at temperatures below 50 °C. The effects of spray time, film thickness, synthesis time prior to spray deposition, and aging time at high relative humidity after deposition on the atomic arrangement and the mesoorder of the mesoporous titania were studied. We find the crystallite size to depend on both the synthesis time and aging time of the films, where longer times result in larger crystallites. Using the photocatalytic activity of titania, the structure-directing agent is removed with UV radiation at 43–46 °C. The capability of the prepared films to remove the polymer template increased with longer synthesis and aging times due to the increased crystallinity, which increases the photocatalytic efficiency of the titania films. However, with increasingly longer times, the crystallites grow too large for the mesoorder of the pores to be maintained. This work shows that a scalable spray coating method can be used to prepare locally ordered mesoporous polycrystalline titania films by judiciously tuning the synthesis parameters.     

Fast gas chromatography-negative-ion chemical ionization mass spectrometry with microscale volume sample preparation for the determination of benzodiazepines and alpha-hydroxy metabolites, zaleplon and zopiclone in whole blood

Fast gas chromatography/negative-ion chemical ionization mass spectrometric (GC/NICI-MS) assay combined with rapid and nonlaborious sample preparation is presented for the simultaneous determination of benzodiazepines and alpha-hydroxy metabolites, zaleplon and zopiclone in whole blood. The compounds were extracted from 100 microl of whole blood by simultaneous multitube, microscale liquid-liquid extraction (LLE) and derivatized by N-methyl-N-(tert-butyldimethylsilyl)trifluoroacetamide (MTBSTFA), without the need for the time-consuming concentration stage. In the analytical separation, various parameters of fast GC/NICI-MS were applied, e.g. the use of hydrogen as a GC carrier gas, a high carrier gas velocity, a small film thickness of the analytical column, fast MS data acquisition, fast temperature ramping, and high initial and final temperatures of GC column. Sensitive identification, screening and quantitation of 18 compounds of interest were achieved in chromatographic separation in only 4.40 min. Accurate and reproducible results were obtained by using five different and carefully selected deuterated analogues on the basis of the chemical properties of the target analytes. Nevertheless, for alpha-OH-midazolam, and for bromazepam and flunitrazepam at low concentrations, the results can be considered only semiquantitative on the basis of the validation data. The extraction efficiencies ranged from 74.3 to 105.7% and the limits of quantitation (LOQ) from 1 to 100 ng ml(-1). Rapid sample preparation and fast chromatographic separation allowed cost-efficient, reliable and high sample-throughput analyses with a low amount of manual work. The method was fully validated and accredited according to EN ISO/IEC 17025 standards and is applicable for sensitive, reliable and quantitative determination of benzodiazepines, zaleplon and zopiclone, e.g. in clinical and forensic toxicology.     

Preparation of La0.75Sr0.25MnO3 Nano-Phase Powders and Films from Alkoxide Precursors

The first purely alkoxide-based sol-gel route to nano-phase powders and thin films of perovskite La_0.75Sr_0.25MnO₃ is described. The phase and microstructure evolution on heat treatment of free gel films to form the target nano-phase oxide were investigated by TGA, IR spectroscopy, powder XRD, SEM and TEM-EDS. The xerogel consisted of a hydrated oxo-carbonate, without remaining alkoxo groups or solvent. Heating at 5°C·min^–1 decomposed the carbonate groups and yielded the pure perovskite La_0.75Sr_0.25MnO₃ at 760°C. The cell dimensions were virtually unchanged from the first observation of perovskite at 680°C, to 1000°C, 4 h. The monoclinic cell of La_0.75Sr_0.25MnO₃ obtained at 1000°C, 4 h, had the dimensions a = 5.475(1), b = 5.504(2), c = 7.771(1) Å, = 90.50(2), fitting the literature data quite well. Crack-free, homogenous, 150 nm thick La_0.75Sr_0.25MnO₃ films were prepared by spin-coating Si/SiO₂/TiO₂/Pt and polycrystalline -Al₂O₃ substrates with a 0.6 M alkoxide solution, followed by heating at 5°C·min^–1 to 800°C, 30 min.