Multi-element analysis by inductively coupled plasma optical emission spectrometry of airborne particulate matter collected with a low-pressure cascade impactor

A method was developed for the elemental analysis of size segregated particles ranging from 0.03 to 10 microns. Sampling and analysis problems are discussed in this paper. Particles were collected with a Dekati low-pressure cascade impactor. PTFE filters coated with oleic acid were used as substrate. Particles were microwave digested in closed vessels. The optimum digestion mixture was composed of HNO3 (1 mL), HF (50 microL) and H2O (1 mL). The optimal power setting and digestion time were studied in order to achieve an efficient digestion. A ca. 35 min microwave digestion cycle at a 650 W maximum power allowed complete digestion of the samples. Special emphasis was placed on the pressure in the closed vessels to avoid sample losses. Solution samples were analysed by inductively coupled plasma optical emission spectrometry using an ultrasonic nebuliser for 18 elements (Al, Ba, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, S, Sr, Ti, V, Zn). This procedure was tested with NIST Standard Reference Material 1648 Urban Particulate. Recoveries for certified elements ranged from 95 to 105% except for Al (90%). The influence of cascade impactor materials was investigated with 44 field samples. Strong artefacts due to contamination were shown for analysis at environmental concentrations of Al, Cr, Mn and Ni.     

Biotransformation of (−)β-pinene by Aspergillus niger ATCC 9642

The main objective of this work was to investigate the biotransformations of (−)α-pinene, (−)β-pinene, and (+) limonene by Aspergillus niger ATCC 9642. The culture conditions involved—concentration of cosolvent (EtOH), substrate applied, and sequential addition of substrates—were investigated. Adaptation of the precultures with small amounts of substrate was also studied. The experiments were performed in conical flasks with liquid cultures. This strain of A. niger was able to convert only (−)β-pinene into α-terpineol. An optimum conversion of (−)β-pinene into α-terpineol of about 4% was obtained when the substrate was applied as a diluted solution in EtOH and sequential addition of substrate was used.     

Conformational flexibility of a synthetic glycosylaminoglycan bound to a fibroblast growth factor. FGF-1 recognizes both the (1)C(4) and (2)S(O) conformations of a bioactive heparin-like hexasaccharide

The first direct NMR determination of the conformation of a conformationally flexible heparin-like hexasaccharide bound to a key receptor, FGF-1, is described. The determination has been based on the use of a 13C-labeled protein and a regular 12C sugar. FGF-1 recognizes several conformations of the iduronic moieties of the hexasaccharide. Therefore, this case is different than that described for the controversial recognition of heparin-like saccharides by AT-III, which seems to recognize just one conformation of the iduronic acid residues.     

Magnetic properties of cyano-bridged Ln3+-M3+ complexes. Part I: trinuclear complexes (Ln3+ = La, Ce, Pr, Nd, Sm; M3+ = FeLS, Co) with bpy as blocking ligand

The reaction of Ln(NO3)3(aq) with K3[Fe(CN)6] or K3[Co(CN)6] and 2,2'-bipyridine in water/ethanol led to eight trinuclear complexes: trans-[M(CN)4(mu-CN)2{Ln(H2O)4(bpy)2}2][M(CN)6].8H2O (M = Fe3+ or Co3+, Ln = La3+, Ce3+, Pr3+, Nd3+, and Sm3+). The structures for the eight complexes [La2Fe] (1), [Ce2Fe] (2), [Pr2Fe] (3), [Nd2Fe] (4), [Ce2Co] (5), [Pr2Co] (6), [Nd2Co] (7), and [Sm2Co] (8) have been solved; they crystallize in the triclinic space group P and are isomorphous. They exhibit a supramolecular 3D architecture through hydrogen bonding and pi-pi stacking interactions. A stereochemical study of the nine-vertex polyhedra of the lanthanide ions, based on continuous shape measures, is presented. No significant magnetic interaction was found between the lanthanide(III) and the iron(III) ions.     

Three dissimilarity measures to contrast dendrograms

We discussed three dissimilarity measures between dendrograms defined over the same set, they are triples, partition, and cluster indices. All of them decompose the dendrograms into subsets. In the case of triples and partition indices, these subsets correspond to binary partitions containing some clusters, while in the cluster index, a novel dissimilarity method introduced in this paper, the subsets are exclusively clusters. In chemical applications, the dendrograms gather clusters that contain similarity information of the data set under study. Thereby, the cluster index is the most suitable dissimilarity measure between dendrograms resulting from chemical investigation. An application example of the three measures is shown to remark upon the advantages of the cluster index over the other two methods in similarity studies. Finally, the cluster index is used to measure the differences between five dendrograms obtained when applying five common hierarchical clustering algorithms on a database of 1000 molecules.     

Solvent effects on resonant first hyperpolarizabilities and Raman and hyper-Raman spectra of DANS and a water-soluble analog

The two-photon-resonant first hyperpolarizabilities associated with hyper-Rayleigh and hyper-Raman scattering are reported for 4-dimethylamino-4-nitrostilbene in 1,4-dioxane, dichloromethane, acetonitrile, and methanol, and for an ionic analog, 4-N,N-bis(6-(N,N,N-trimethylammonium)-hexyl)amino-4-nitrostilbene dibromide in methanol and water. Resonance Raman and hyper-Raman excitation profiles are also measured and modeled. The resonance Raman and hyper-Raman spectra show very similar relative intensities which do not vary much as the excitation frequency is tuned across the lowest-energy strong linear absorption band, suggesting that a single resonant electronic state dominates the one- and two-photon absorptions in this region. The absorption, resonance Raman, and hyper-Raman profiles can be simulated reasonably well with a common set of parameters. The peak resonant (absolute value of beta)2, measured by hyper-Rayleigh scattering, varies by about 50% over the range of solvents examined and shows a weak correlation with the linear absorption maximum, with the redder-absorbing systems exhibiting larger peak hyperpolarizabilities. The experimental hyper-Rayleigh intensities are higher than those calculated, possibly reflecting contributions from nonresonant electronic states.     

Two-dimensional optical three-pulse photon echo spectroscopy. II. Signatures of coherent electronic motion and exciton population transfer in dimer two-dimensional spectra

Using the nonperturbative approach to the calculation of nonlinear optical spectra developed in a foregoing paper [Mancal et al., J. Chem. Phys. 124, 234504 (2006), preceding paper], calculations of two-dimensional electronic spectra of an excitonically coupled dimer model system are presented. The dissipative exciton transfer dynamics is treated within the Redfield theory and energetic disorder within the molecular ensemble is taken into account. The manner in which the two-dimensional spectra reveal electronic couplings in the aggregate system and the evolution of the spectra in time is studied in detail. Changes in the intensity and shape of the peaks in the two-dimensional relaxation spectra are related to the coherent and dissipative dynamics of the system. It is shown that coherent electronic motion, an electronic analog of a vibrational wave packet, can manifest itself in two-dimensional optical spectra of molecular aggregate systems as a periodic modulation of both the diagonal and off-diagonal peaks.     

Metal-catalysed oxidation processes in thiosemicarbazones: new complexes with the ligand N-{2-([4-N-ethylthiosemicarbazone]methyl)phenyl}-p-toluenesulfonamide

The coordination behaviour of a new thiosemicarbazone Schiff-base building block, N-{2-([4-N-ethylthiosemicarbazone]methyl)phenyl}-p-toluenesulfonamide, H2L1 (1), incorporating a bulky tosyl group, towards Mn II, Fe II, Co II, Ni II, Cu II, Zn II, Cd II, Ag I, Sn II, and Pb II has been investigated by means of an electrochemical preparative procedure. Most metal complexes of L1 have the general formula [M(L1)]2.nX (M=Mn, Fe, Co, Ni, Cu, Cd, Pb; n=0-4, X=H2O or CH3CN), as confirmed by the structure of [Pb(L1)]2 (15), in which the lone pair on lead is stereochemically active. This lead(II) complex shows an intense fluorescence emission with a quantum yield of 0.13. In the case of silver, the complex formed was found to possess a stoichiometry of [Ag2(L1)]2.3H2O. During reactions with manganese and copper metals, interesting catalysed processes have been found to take place, with remarkable consequences regarding the ligand skeleton structure. In synthesising the manganese complex, we obtained an unexpected dithiolate thiosemicarbazone tosyl ligand, H2L2, as a side-product, which has been fully characterised, including by X-ray diffraction analysis. In the case of copper, the solid complex has the formula [CuL1]2, but the crystallised product shows the copper atoms coordinated to a new cyclised thiosemicarbazone ligand, H2L3, as in the structures of the complexes [Cu(L3)]2.CH3CN (8) and [Cu(L3)(H2O)]2.CH3CN.H2O (9). The zinc complex [Zn(L1)]4 (12) displays a particular tetranuclear zeolite-type structure capable of hosting small molecules or ions, presumably through hydrogen bonding.     

Singlet oxygen generation versus O–O homolysis in phenyl-substituted anthracene endoperoxides investigated by RASPT2, CASPT2, CC2, and TD-DFT methods

Peptidylarginine deiminase 4 (PAD4), also known as protein arginine deiminase 4, performs a post-translational deimination that converts arginine to citrulline. The dysregulation of PAD4 has been implicated in a number of diseases, including rheumatoid arthritis (RA) and cancer. This makes PAD4 an important therapeutic target. To develop small-molecule inhibitors as potential treatments, it is advantageous if the catalytic mechanism is well understood. The protonation states of the active site residues, which have long been under controversy, have a direct impact on the catalytic mechanism. Two competing mechanisms are under investigation in the current literature. The first is a reverse protonation mechanism that depends on the active site histidine and cysteine existing as an ion pair. The second is a substrate-assisted mechanism that depends on the active site histidine and cysteine being neutral. This study uses the semimicroscopic protein dipoles Langevin dipoles (PDLD/S) linear response approximation method in the MOLARIS software package to calculate the change in solvation energy of moving the residue from water to the protein interior, and then using that information to assess the protonation states of the active site residues of PAD4. Results from these calculations suggest that in the enzyme–substrate complex of PAD4, the cysteine and histidine are protonated and deprotonated, respectively, and are therefore both neutral, analogous to the proposed protonation states of the active site residues in the Michaelis complex in the substrate-assisted mechanism.     

Observation of defect clustering in Gd-doped calcium fluoride

Abstract

Solid solutions Ca_1-xGd_xF_2+x for 3 × 10^?7≤ x ≤10^?1 have been studied by electron paramagnetic resonance (EPR) and ionic thermal currents (ITC). The EPR experiments show the presence of two single-ion sites a cubic and a tetragonal Gd³⁺ center which co-exist with comparable abundances for intermediate impurity concentrations. The cubic center predominates at very low and high concentrations. Seven different relaxation processes have been identified from the ITC spectra and the variation of their intensity vs. x was measured. The absolute concentrations of the cubic and nn Gd³⁺ dipoles were calculated. The scavenging of interstitial fluorines by the neutral clusters explains both the abundance of cubic sites at high concentration and the variety of orientable clusters detected by ITC.