Water-soluble oligomer dimers based on paracyclophane: a new optical platform for fluorescent sensor applications

Water soluble paracyclophane chromophore dimers provide optical reporters that show little sensitivity to surfactants and thus are ideal for biosensor design. Strong intramolecular delocalization circumvents complications from intermolecular delocalization in spontaneously formed aggregates. The synthesis of 2 involves a novel TBAT deprotection/butane sultone ring-opening sequence, which should be general for the preparation of water-soluble conjugated oligomers and polymers.     

Palladium-catalyzed cascade allylation/carbopalladation/cross coupling: a novel three-component reaction for the synthesis of 3,3-disubstituted-2,3-dihydrobenzofurans

A novel one-pot palladium-catalyzed cascade between 2-iodophenol, methyl bromomethylacrylate and an arylboronic acid provides an efficient access to heterocycles possessing the 3,3-disubstituted-2,3-dihydrobenzofuran skeleton via allylation/carbopalladation/Suzuki cross-coupling.     

Characterization and quantitation of mixtures of alkyl ether sulfates and carboxylic acids by capillary electrophoresis with indirect photometric detection

The separation, characterization, and determination of mixtures of alkyl ether sulfates (AES) and fatty acids (C10-C16) in background electrolytes (BGEs) containing acetonitrile (ACN)-water mixtures is addressed. Due to inhibition of the ionization of the carboxylate groups, the migration time and the resolution between the fatty acids decreased when the water content of the BGE was reduced, but efficiency and resolution between the AES oligomers improved. The migration times increased and resolution improved by substituting 5% ACN by an equivalent amount of dioxane. A complete separation of the two surfactant classes, up to the AES oligomers with 8 ethylene oxide units (EOs) with respect to C10, with excellent resolution between the AES oligomers, while preserving a satisfactory resolution between the fatty acids, was achieved with a BGE containing 5 mM trimethoxybenzoic acid, 7 mM dipentylamine, 85% ACN, 5% dioxane, and 10% water. The two surfactant classes were increasingly resolved by further reducing the water content of the BGE. Thus, C2 (acetate) was resolved from the AES oligomers up to 7 EOs using 90% ACN and 5% dioxane, but the resolution between the heavier fatty acids was poor with this BGE. Identification of the AES oligomers was eased by the excellent regularity of the successive migration times; thus, within each AES subclass or series of oligomers with the same number of carbon atoms in the alkyl chain, the migration times decreased following a mild curve as the number of EOs increased. The way how the data obtained by indirect photometry (corrected peak areas that are proportional to the molar concentrations) should be managed to avoid systematic error when the calibration curve is constructed using an AES standard with an oligomer distribution different from that of the samples is discussed and equations are given. Decyl sulfate was successfully used as internal standard. The detection limits (S/N = 3) were of ca. 2 microM for individual AES oligomers.     

Alkynenitriles: chelation-controlled conjugate additions

[reaction: see text] Chelation between gamma-hydroxybutynenitrile and Grignard reagents triggers a particularly facile anionic conjugate addition reaction. Structurally diverse Grignard reagents add with equal efficiency, providing an intermediate anion that stereoselectively alkylates benzaldehyde in an overall addition-alkylation reaction.     

Nucleocyclitols. Synthesis of substituted purinyl-muco-inositol derivatives

Several carbocyclic nucleoside analogs possessing a 6-substituted purine linked to a mesylated muco-inositol were synthesized. The coupling of triethylamine-activated 6-chloropurine with 2,3-anhydro-l,5,6-tri-O-(methanesulfonyl)-epi-inositol gave a 6-chloro purinyl muco-inositol amenable to further synthetic transformations in the heterocyclic moiety by substitution of the chlorine atom by nitrogen nucleophiles such as methylamino, diethylamino, benzylamino, hydrazino, morpholino, hydroxylamino, piperidino, and glycyl groups.     

Oxidation of formic acid and carbon monoxide on gold electrodes studied by surface-enhanced Raman spectroscopy and DFT.

The oxidation of formic acid and carbon monoxide was studied at a gold electrode by a combination of electrochemistry, in situ surface-enhanced Raman spectroscopy (SERS), differential electrochemical mass spectrometry, and first-principles DFT calculations. Comparison of the SERS results and the (field-dependent) DFT calculations strongly suggests that the relevant surface-bonded intermediate during oxidation of formic acid on gold is formate HCOO- ad*. Formate reacts to form carbon dioxide via two pathways: at low potentials, with a nearby water to produce carbon dioxide and a hydronium ion; at higher potentials, with surface-bonded hydroxyl (or oxide) to give carbon dioxide and water. In the former pathway, the rate-determining step is probably related to the reaction of surface-bonded formate with water, as measurements of the reaction order imply a surface almost completely saturated with adsorbate. The potential dependence of the rate of the low-potential pathway is presumably governed by the potential dependence of formate coverage. There is no evidence for CO formation on gold during oxidation of formic acid. The oxidation of carbon monoxide must involve the carboxyhydroxyl intermediate, but SERS measurements do not reveal this intermediate during CO oxidation, most likely because of its low surface coverage, as it is formed after the rate-determining step. Based on inconclusive spectroscopic evidence for the formation of surface-bonded OH at potentials substantially below the surface oxidation region, the question whether surface-bonded carbon monoxide reacts with surface hydroxyl or with water to form carboxyhydroxyl and carbon dioxide remains open. The SERS measurements show the existence of both atop and bridge-bonded CO on gold from two distinguishable low-frequency modes that agree very well with DFT calculations.     

Muonium formation and the “missing fraction” in vapors

The vapor phase fractional polarizations of positive muons thermalizing as the muonium atom (P _M) and in diamagnetic environments (P _D) has been measured in H₂O, CH₃OH, C₆H₁₄, C₆H₁₂, CCl₄, CHCl₃, CH₂Cl₂ and TMS, in order to compare with the corresponding fractions measured in the condensed phases. There is a marked contrast in every case, with the vapor phase results being largely understandable in terms of a charge exchange/hot atom model. Unlike the situation in the corresponding liquids, there is no permanent lost fraction in the vapor phase in the limit of even moderately high pressures (1 atm); at lower pressures, depolarization is due to hyperfine mixing and is believed to be well understood. For vapor phase CH₃OH, C₆H₁₄, C₆H₁₂, and TMS therelative fractions are found to be pressure dependent, suggesting the importance of termolecular hot atom (or ion) reactions in the slowing down process. For vapor phase H₂O and the chloromethanes, the relative fractions are pressure independent. For CCl₄,P _M=P _D0.5 in the vapor phase vs.P _D=1.0 in the liquid phase; fast thermal reactions of Mu likely contribute significantly to this difference in the liquid phase. For H₂O,P _M 0.9 andP _D0.1 in the vapor phase vs.P _D 0.6 andP _M0.2 in the liquid phase. Water appears to be the one unequivocal case where the basic charge exchange/hot atom model is inappropriate in the condensed phase, suggesting, therefore, that radiation induced spur effects play a major role.     

Regio- and stereoselective oxetane formation via paterno-buchi photocycloaddition

Carbonyl 2 + 2 photoaddition occurs selectively to the alkene moiety of 3-(4-methyl-3-pentenoxy)pyridine. Photolysis of alkene containing pyridines in acetophenone gives rise to an oxetane which is obtained with extremely high diastereoselectivity as shown by analysis of the major 2 + 2 photoproduct. A second photoproduct, 2,3-dihydroxy-2,3-diphenylbutane, is obtained as a result of acetophenone coupling.     

Reaction of tetrahydrobenz[a]acridinones with hydroxylamine hydrochloride. VII

Oximation of ortho-substituted phenylbenz[a]acridinones using hydroxylamine hydrochloride, sodium hydroxide and ethanol as the solvent gave always the benzoquinacridine N-oxide 2 . Oximation of para-substituted phenylbenz[a]acridinones, however, gave only the corresponding oximes. The structure of all products was corroborated by ir, ¹H and ¹³C-nmr and mass spectral data. Theoretical calculations support the experimental findings.     

Acid Pullulanase from Bacillus polymyxa MIR-23

Within the frame of a screening program aimed at the isolation of amylolytic sporeformers, one strain with high amylolytic activity designated MIR-23 was selected. The microbial characterization was carried out by morphological and biochemical tests and, by means of statistical treatment, was identified asBacillus polymyxa. The organism could grow in acidic conditions (pH 5.0) on a starch medium and produce α-amylase, pullulanase, and α-glucosidase. Batch cultures showed the highest enzyme activities in the stationary phase. Pullulanase activity exhibited an optimal temperature of 52–57°C at pH 4.5–5.5. These properties would allow its use in the saccharification processes in the starch industries.