Analytical potential of mid-infrared detection in capillary electrophoresis and liquid chromatography: a review

Literature published in the last decade concerning the use of mid-infrared spectrometry as a detection system in separation techniques employing a liquid mobile phase is reviewed. In addition to the continued use of isocratic liquid chromatographic (LC) techniques, advances in chemometric data evaluation techniques now allow the use of gradient techniques on a routine basis, thus significantly broadening the range of possible applications of LC-IR. The general trend towards miniaturized separation systems was also followed for mid-IR detection where two key developments are of special importance. Firstly, concerning on-line detection the advent of micro-fabricated flow-cells with inner volumes of only a few nL for transmission as well as attenuated total reflection measurements enabled on-line mid-IR detection in capillary LC and opened the path for the first successful realization of on-line mid-IR detection in capillary zone electrophoresis as well as micellar electrokinetic chromatography. Secondly, concerning off-line detection the use of micro-flow through dispensers now enables to concentrate eluting analytes on dried spots sized a few tens of micrometers, thus matching the dimensions for sensitive detection by mid-IR microscopy. Finally in an attempt to increase detection sensitivity of on-line mid-IR detection, mid-IR quantum cascade lasers have been used. Applications cover the field of food analysis, environmental analysis and the characterization of explosives among others. Best detection sensitivities for on-line and off-line detection have been achieved in miniaturized systems and are in the order of 50 ng and 2 ng on column, respectively.     

Monitoring of Polymerized Triglycerides in Deep-Frying Oil by On-Line GPC-FTIR Spectrometry Using the Science Based Calibration Multivariate Approach

On-line gel permeation chromatography Fourier transform infrared (GPC-FTIR) is proposed as detection technique for the determination of the total polymer triacylglyceride (PTG) content in olive oil as an alternative to other conventional detectors such as the evaporative light scattering detector (ELSD) or the refraction index detector (RID). FTIR detection allowed confirmation additionally to quantification of the analytes via their characteristic infrared spectra. For the extraction of chromatograms, a multivariate method called science based calibration (SBC) was used. The SBC method employed a reference spectrum of triacylglycerides (TG) extracted from the injection of a fresh olive oil sample and data obtained from a blank injection as ‘noise’ matrix, to estimate a regression vector subsequently used to predict the relative concentration of the analyte during the GPC run. Results found evidenced that the use of SBC improved the selectivity, sensitivity and repeatability of the GPC-FTIR measurements as compared to the ‘classical’ approach based on the measurement of the spectral area in a defined spectral range. The developed method provided a limit of detection for PTGs of 0.19 mg mL^?1, which corresponds to a 0.65% w/w for an oil sample mass of 300 mg.     

Local Disorder in Hydrogen Storage Compounds: The Case of Lithium Amide/Imide

Amides and imides of alkali metals are a very promising class of materials for use as a hydrogen‐storage system, as they are able to store and release hydrogen via a chemical route at controllable temperatures and pressures. We critically revise the present picture of the atomic structure of the lightest member (LiNH₂/Li₂NH) by using a combined computational and experimental approach. Specifically, ab initio path integral molecular dynamics simulations and solid‐state ¹H NMR techniques are combined. The results show that the presently assumed local structure might be inconsistent or at least incomplete and needs considerable revision. In particular, the Li atoms turn out to be more mobile and more disordered than suggested by structural data obtained from X‐ray scattering. Also, the configuration of the hydrogen atoms, which is accessible via the NMR experiment and the corresponding first‐principles calculations, is different from the previously assumed data. The computed and experimentally observed ¹H NMR parameters are in very good mutual agreement and illustrate the unusual chemical environment of the hydrogen atoms in this system. Incorporating our results on the new lithium data, we show that the effect of nuclear quantum delocalization for the hydrogen atoms is considerably reduced compared to the perfect crystal structure.     

Oligomerization of 1,2‐Ethanedithiol: An Expedient Approach to Oligothiaethylenethioglycols

Reactions of ethylenedithioglycol (ETG) with Na₂CO₃, K₂CO₃, and Cs₂CO₃ provided the oligothiaethylenethioglycols (nETG): di‐ (DETG), tri‐ (TrETG), tetra‐ (TETG), and pentathiaethylenethioglycol (PETG), along with higher polymers. The most efficient carbonate was K₂CO₃ and reactions using DETG and TrETG as starting materials—or their mixtures—were also found to afford similar species. This largely unknown oligomerization process was thoroughly explored and potential pathways were put forward. A convenient conversion of ETG to laboratory quantities of the otherwise scarce and/or expensive DETG, TrETG, TETG, and PETG oligomers, in organic or aqueous media was achieved. Notably, this straightforward reaction takes place without the addition of expensive or toxic metal catalysts and with pure water as the solvent, thereby highlighting its potential as a green chemical reaction. Moreover, the process opens up new approaches to dynamic combinatorial libraries (DCLs) of oligomers and macrocycles with manifolded nETG [(SCH₂CH₂)_nS] bridges.     

Combined effects of electric field and hydrostatic pressure on electron states in asymmetric GaAs/(Ga,Al) triple quantum dots

The combined effects of an in-growth direction applied electric field and hydrostatic pressure on the exciton binding energy and photoluminescence energy transitions are reported in this work for triple vertically coupled quantum dots. The calculations have been carried out within the effective mass approximation, and using a variational procedure. The results show that the exciton binding energy and the photoluminescence energy transitions are functions of external probes like the hydrostatic pressure and the applied electric field.     

Linear and nonlinear optical properties of carbon nanotube-coated single-mode optical fiber gratings

Single-wall carbon nanotube deposition on the cladding of optical fibers has been carried out to fabricate an all-fiber nonlinear device. Two different nanotube deposition techniques were studied. The first consisted of repeatedly immersing the optical fiber into a nanotube supension, increasing the thickness of the coating in each step. The second deposition involved wrapping a thin film of nanotubes around the optical fiber. For both cases, interaction of transmitted light through the fiber core with the external coating was assisted by the cladding mode resonances of a tilted fiber Bragg grating. Ultrafast nonlinear effects of the nanotube-coated fiber were measured by means of a pump-probe pulses experiment.     

Chromium(VI) oxide oxidation of non‐ethoxylated and ethoxylated alcohols for determination by electrospray ionization mass spectrometry

A new derivatization procedure to increase the sensitivity of electrospray ionization mass spectrometry (ESI‐MS) to non‐ethoxylated and ethoxylated alcohols was investigated. The analytes were oxidized with chromium(VI) oxide and the resulting carboxylic and ethoxy‐carboxylic acids were isolated by extraction with ethyl acetate; the extracts were alkalinized and infused into the ESI‐MS system working in the negative‐ion mode. The yields of the combined oxidation‐extraction were ca. 100% for non‐ethoxylated fatty alcohols dissolved in acetone and they decreased moderately in samples containing increasing amounts of water (e.g., a 75% yield was obtained with 50% water). Ethoxylated alcohols with more than two ethylene oxide units resulted in yields of ca. 60%. Low limits of detection (LODs) were obtained when the procedure was applied to the analysis of body‐care products and cosmetics containing fatty alcohols, e.g., in a varicose‐vein cream, the LODs were 25 µg cetyl alcohol and 7.5 µg stearyl alcohol (detected as palmitic acid and stearic acid, respectively) per gram of sample. High molecular mass alcohols were also detected in seawater after pre‐concentration by solid‐phase extraction. Thus, the proposed method is particularly valuable for use in industrial samples having complex matrices and in environmental samples and it is competitive with other methods for the analysis of trace amounts of fatty alcohols. Copyright © 2010 John Wiley & Sons, Ltd.     

Multivariate optimization of the Kharasch–Sosnovsky allylic oxidation of olefins

The multivariate optimization method known as simplex is applied to the Kharasch–Sosnovsky allylic oxidation of double bonds. By applying this method, the amounts of three variables (copper source, oxidant, and additive) are optimized at the same time. Under the conditions thus obtained the reaction takes place in a considerable shorter time, being the alkene the limiting reagent. These conditions are applied to some monoterpenes and sesquiterpenes leading regioselectively to the corresponding benzoate esters, opening a route to the employment of this reaction in the synthesis of more complex molecules.     

Orphan-Free Anisotropic Voronoi Diagrams

We describe conditions under which an appropriately defined anisotropic Voronoi diagram of a set of sites in Euclidean space is guaranteed to be composed of connected cells in any number of dimensions. These conditions are natural for problems in optimization and approximation, and algorithms already exist to produce sets of sites that satisfy them.     

Candida rugosa lipase Lip1–polyethyleneglycol interaction and the relation with its partition in aqueous two-phase systems

The interaction between a lipase from Candida rugosa (Lip1) and polyethyleneglycols of different molecular masses was studied using fluorescence and circular dichroism approaches in order to be applied to the analysis of the enzyme partition mechanism in aqueous two-phase systems of polyethyleneglycol–potassium phosphate. The decrease of the partition coefficients with the polyethyleneglycol molecular mass showed that the enzyme partition is driven by the excluded volume effect and not by the enzyme–polymer interaction. The polymer did not affect the secondary and tertiary structure of the enzyme nor its biological activity. The lipase from Candida rugosa lyophilizate was partitioned in favour of the polyethyleneglycol rich phase; PEG 2000 being the system which showed the better enzyme recovery (78.26%) with a purification factor of 2.3. This method could be applied as a first step to isolate the enzyme from a culture medium with good recovery and without modifying the enzymatic capacity and the molecular structure.