Simulation of Electrical and Thermal Behavior of Poly(propylene) / Carbon Filler Conductive Polymer Composites

PP-carbon CPC show interesting thermo-electrical properties, smooth resistivity increase with temperature up to 150°C and consequently high power dissipation on a wide temperature range. The addition of short carbon fibers to PP already formulated with carbon black increases sharply the electrical conductivity of the CPC but does not have much influence on thermal conductivity as it could have been expected from the favorable aspect ratio of the fibers. The simulations of the thermo-electrical behavior of the CPC under tension put into evidence a temperature gradient at high heat flux due to the low thermal conductivity, which may damage the material itself.     

Sliding droplets on superomniphobic zinc oxide nanostructures

This study reports on liquid-repellency of zinc oxide nanostructures (ZnO NS). The ZnO NS are synthesized by an easy and fast chemical bath deposition technique. Three different nanostructured surfaces consisting of nanorods, flowers, and particles are prepared, depending on the deposition time and the presence of ethanolamine in the reaction mixture. Chemical functionalization of the ZnO NS with 1H,1H,2H,2H-perfluorodecyltrichlorosilane (PFTS) in liquid (PFTS L) and vapor phase (PFTS V) or through octafluorobutane (C(4)F(8)) plasma deposition led to the formation of superomniphobic surfaces. A comprehensive characterization of the wetting properties (static contact angle and contact angle hysteresis) has been performed using liquids composed of deionized water and various concentrations of ethanol (surface tension between 35 and 72.6 mN/m). Depending on the nanostructures morphology, coating nature and liquid employed, high static apparent contact angles θ ≈ 150-160°, and low contact angle hysteresis Δθ ≈ 0° are obtained. The different ZnO NS are characterized using scanning electron microscopy (SEM) and contact angle measurements. The results reported in this work permit preparation of sliding omniphobic surfaces using a simple and low cost technique.     

Phase behavior of palmitic acid/cholesterol/cholesterol sulfate mixtures and properties of the derived liposomes

The phase behavior of mixtures formed by palmitic acid (PA), cholesterol (Chol), and sodium cholesteryl sulfate (Schol) has been characterized by differential scanning calorimetry and infrared and 2H NMR spectroscopy. It is reported that it is possible to form, with PA/sterol mixtures, fluid lamellar phases where the sterol content is very high (a sterol mole fraction of 0.7). As a consequence of the rigidifying ability of the sterols, the PA acyl chains are very ordered. The stability of these self-assembled bilayers is found to be pH-dependent. This property can be controlled by the Chol/Schol molar ratio, and it is proposed that this parameter modulates the balance between the intermolecular interactions between the constituting species. A phase-composition diagram summarizing the behavior of these mixtures as a function of pH, at room temperature, is presented. It is also shown that it is possible to produce large unilamellar vesicles (LUVs) from these mixtures, using standard extrusion techniques. The resulting LUVs display a very limited passive release of the entrapped material. In addition, these LUVs constitute a versatile vector for pH-triggered release.     

Immobilization of η-cyclopentadienyltris(dimethylamido)zirconium polymerization catalysts on a chlorosilane- and HMDS-modified mesoporous silica surface: a new concept for supporting metallocene amides towards heterogeneous single-site-catalysts

The modification of a mesoporous silica surface with Si(Ind)(CH₃)₂Cl and the immobilization of CpZr(NMe₂)₃ on this surface was studied via IR-spectroscopy. To reduce side reactions, the indenyl-modified silica was reacted with hexamethyldisilazane (HMDS) under IR-control before the CpZr(NMe₂)₃-immobilization. The role of the hydroxyl group protection with HMDS is discussed. The surface modifications have been repeated via Schlenk technique at the same conditions and the surface modifications were studied with ¹³C CP MAS–NMR, ¹H MAS–NMR, elemental-, SEM- and BET-analysis. The surface species of the resulting catalysts are discussed. The precatalysts have been treated with methylaluminoxane (MAO) (Al:Zr (mol:mol)=500:1) and the resulting Zr contents (leaching-effect) are discussed. All catalysts have been tested in ethylene and propylene polymerization.     

N-3 alkylation of uracils with unprotected amino alcohols using the Mitsunobu reaction

During our search for novel CGRP antagonists, we had great difficulty in accessing one of our key motifs. Herein, we communicate how we solved the problem by an unprecedented Mitsunobu alkylation using unprotected amino alcohols.     

Cyclotriphosphazene,a scaffold for 19F MRI contrast agents

A cyclotriphosphazene substituted with six 3,5-bis(trifluoromethyl) benzyloxy units was designed as a novel ¹⁹F MRI contrast agent. The resulting molecule has 36 magnetically equivalent fluorine atoms and exhibited suitable MRI properties with high imaging sensitivity, confirming the proof-of-concept as a convenient scaffold for the production of new ¹⁹F MRI contrasts agents.     

Asymmetric total synthesis of (+)-luciduline: toward a general approach to related Lycopodium alkaloids

As part of a research program directed toward the synthesis of Lycopodium alkaloids, a multigram scale asymmetric synthesis of intermediate 11 was achieved in 11 steps from pyridine (17). In addition to our alkene metathesis strategy, a key feature of this synthetic approach consists of a Fukuyama's Diels-Alder cycloaddition between 1,2-dihydropyridine and acrolein using MacMillan's catalyst (18) on a 50 g scale. This led to a 12-step catalytic asymmetric synthesis of (+)-luciduline (1). A broader subset of Lycopodium alkaloids could also be obtained, as demonstrated by the derivatization of 11 into advanced intermediates for the synthesis of some of these natural products.     

Theoretical and experimental 1H, 13C and 15N NMR studies of N‐alkylation of substituted tetrazolo[1,5‐a]pyridines

The ¹⁵N as well as ¹H and ¹³C chemical shifts of nine substituted tetrazolopyridines and their corresponding tetrazolopyridinium salts have been determined by using NMR spectroscopy at the natural abundance level of all nuclei in CD₃CN. In this paper, we report, for the first time, the N‐alkylation reaction of electron deficient tetrazolopyridines. The treatment of tetrazolopyridines 5–13 with one equivalent of trialkyloxonium tetrafluoroborate leads to a mixture of two isomers, i.e. N3‐ and N2‐alkyl tetrazolo[1,5‐a]pyridinium salts. It has been observed that the N3‐isomer is always the major isomer, except in the case of the CF₃ substituent, where the two isomers are obtained in the same amount. The quaternary tetrazolopyridinium nitrogen N3 is shielded by around 100 ppm (parts per million) with respect to the parent tetrazolopyridine. Experimental data are interpreted by means of density functional theory (DFT) calculations, including solvent‐induced effects, within the conductor‐like polarizable continuum model (CPCM). Good agreements between theoretical and experimental ¹H, ¹³C and ¹⁵N NMR were found. The combination of multinuclear magnetic resonance spectroscopy with gauge including atomic orbital (GIAO) DFT calculations is a powerful tool in the structural elucidation for both neutral and cationic heterocycles and in the determination of the orientation of N‐alkylation of tetrazolopyridines. Copyright © 2009 John Wiley & Sons, Ltd.     

The cyano nitronyl nitroxide radical: experimental and theoretical evidence for the fourth case of the McConnell-I mechanism

The nitronyl nitroxide 2-cyano-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide (1) crystallises in the tetragonal P42(1)m space group with a=7.4050(7), c=8.649(1) A. In the crystal the molecules form layers parallel to the ab plane in which they are orthogonal to each other. In the layers there are close contacts, 2.953(2) A, between the NO groups and the bridging carbon atoms of the O-N-C-N-O fragment of neighbouring radicals. The calculated spin density shows a positive population mainly and equally localised on the NO groups and small but significant negative spin densities on the bridging carbon atom and the cyano nitrogen. Absorption spectra show temperature-dependent transitions related to the magnetic behaviour. The temperature dependence of the magnetic susceptibility in the range 2-300 K reveals that couplings between the radicals are antiferromagnetic, and is interpreted by considering a two-dimensional square array of spin S=1/2 antiferromagnetically coupled (J=-10 cm(-1) and g=2.01). This is interpreted as an exchange coupling through close contact between positive and negative spin densities in orthogonal orbitals on oxygen and carbon atoms, respectively.     

Subcellular mass determination by <Superscript>4</Superscript>He<Superscript>+</Superscript> energy-loss micro-spectrometry

The scanning transmission ion microscope (STIM) has been used to determine the intracellular mass of human cultured cells. A 4He+ microbeam of 2.0 MeV energy was chosen to obtain enhanced ion-energy-loss sensitivity through the micron-thick freeze-dried cells. Local sample mass calculation, based on energy-loss conversion by use of appropriate matrix stopping powers, was performed by use of dedicated software. The method was validated with epoxy resin sections and polymer foil as analogues of biological samples in the range of (intra)cellular thickness, 150 to 3000 nm. STIM analysis resulted in less than 5% error in mass determination. 4He+ energy-loss micro-spectrometry was performed on freeze-dried human ovarian cancer cells, the mean areal mass obtained was 120 microg cm(-2) (200 microg cm(-2) in the nucleus and 250 microg cm(-2) in nucleoli). This method is particularly useful for mass normalization of X-ray fluorescence yields resulting from particle-induced X-ray emission microanalysis (micro-PIXE). When performed successively these two ion-beam micro-analytical methods enable the mapping of true element concentrations within single cells.