High-spin structure of yrast-band in 78Kr

Lifetime of levels up to 22⁺, have been measured in ⁷⁸Kr and an oblate shape is assigned to the ground state using the CSM and the configuration dependent shell correction calculations. Calculations further show that ⁷⁸Kr is highly γ-soft nucleus. The experimental Q _t values coupled with theoretical calculations indicate an oblate shape for ⁷⁸Kr at low spins and triaxial shape at higher spins     

Etude de steroides fluores par spectrometrie de masse—III: Spectres de masse de quelques cetones fluorees

A series of 24 fluorinated steroidal ketones was studied by mass spectrometry. The different locations of the keto group or fluorine atom, permitted of fragmentation patterns to be derived.     

Routine analysis by high precision gas chromatography/mass selective detector/isotope ratio mass spectrometry to 0.1 parts per mil

Stable isotope methods are potentially quite useful for validating natural or enhanced mineral degradation of contaminants. For this reason, a continuous flow gas chromatograph (GC), isotope ratio mass spectrometer (IRMS) has been coupled with a quadrupole mass selective detector (MSD) to allow simultaneous mass spectral and stable carbon isotope ratio data to be obtained from a single chromatographic analysis. This allows the target contaminant and any extra-cellular degradation intermediates to be both qualified and quantified. Previously acceptable limits of precision (0.3 parts per mil) are undesirable given the small fractionation observed during aerobic degradation. To further understand the fate of organic contaminants and to gain information about the metabolic degradative pathway employed by a microorganism, routine isotopic analyses on a range of analytes have been performed. Quantities of sample producing mass-44 ion beam signal (I(44)) of 2 x 10(-10) to 1 x 10(-8) A were analysed. When the IRMS was tuned for high sensitivity, ion source nonlinearities were overcome by peak height correction from an algorithm that was produced using known isotopic standards of varying concentrations. This led to sample accuracy of <0.01 per thousand and sample precision of 0.1 per thousand. Copyright 1999 John Wiley & Sons, Ltd.     

Synthesis of photocrosslinkable fluorinated polydimethylsiloxanes: Direct introduction of acrylic pendant groups via hydrosilylation

The synthesis of photocrosslinkable fluorinated polydimethylsiloxanes was achieved through direct hydrosilylation with copoly(dimethyl)(methyl‐hydrogen) siloxane. First, the hydrosilylation of a fluorinated olefin allowed the introduction of a fluorinated group onto the polysiloxane. Then, a second hydrosilylation of allyl methyl methacrylate led to the polysiloxane bearing both fluorinated and photocrosslinkable groups. This method, compared with a previous method of copolycondensation, is shown to be easier and more efficient. All the new products synthesized were characterized by IR, ¹H NMR, ¹⁹F NMR, and ²⁹Si NMR. A formulation containing the fluorosilicone was crosslinked after being coated on a mesoporous membrane and was evaluated as a vapor permeation membrane. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3722–3728, 2000     

Structure of 72,74Se at high spin

Lifetimes of high spin states up to { }=22⁺ in the yrast positive parity bands have been measured to investigate the shape evolution with increasing spin in ^{72, 74}Se. The Q _t values derived from these measurements indicate that prolate shape stabilizes for ⁷²Se, while a triaxial shape develops for ⁷⁴Se at higher spins. Comparison of the observed trend in Q _t with spin for ^{72, 74}Se with that of the corresponding kryptones isotones emphasizes the stability provided by N=38 prolate shell gap even at high rotational frequency.     

Computational validation of the importance of absolute stereochemistry in virtual screening

Consideration of stereochemistry early in the identification and optimization of lead compounds can improve the efficiency and efficacy of the drug discovery process and reduce the time spent on subsequent drug development. These improvements can result by focusing on specific enantiomers that have the desired potential therapeutic effect (eutomers), while removing from consideration enantiomers that may have no, or even undesirable, effects (distomers). A virtual screening campaign that correctly takes stereochemical information into account can, in theory, be utilized to provide information about the relative binding affinities of enantiomers. Thus, the proper enumeration of the relevant stereoisomers in general, and enantiomeric pairs in particular, of chiral compounds is crucial if one is to use virtual screening as an effective drug discovery tool. As is obvious, in cases where no stereochemical information is provided for chiral compounds in a 2D chemical database, then each possible stereoisomer should be generated for construction of the subsequent 3D database to be used for virtual screening. However, acute problems can arise in 3D database construction when relative stereochemistry is encoded in a 2D database for a chiral compound containing multiple stereogenic atoms but absolute stereochemistry is not implied. In this case, we report that generation of enantiomeric pairs is imperative in database development if one is to obtain accurate docking results. A study is described on the impact of the neglect of enantiomeric pairs on virtual screening using the human homolog of murine double minute 2 (MDM2) protein, the product of a proto-oncogene, as the target. Docking in MDM2 with GLIDE 4.0 was performed using the NCI Diversity Set 3D database and, for comparison, a set of enantiomers we created corresponding to mirror image structures of the single enantiomers of chiral compounds present in the NCI Diversity Set. Our results demonstrate that potential lead candidates may be overlooked when databases contain 3D structures representing only a single enantiomer of racemic chiral compounds.     

还原温度对MoP催化剂加氢精制性能的影响

 通过程序升温还原磷钼酸盐前体的方法制备了无负载磷化钼(MoP)催化剂,并采用XRD,BET,XPS和高压连续微反技术,考察了催化剂的性质,研究了还原温度对催化剂HDN,HDS和HYD性能的影响. 结果表明,在还原温度为600～800 ℃范围内,成功制备出磷化钼催化剂. 高压连续微反结果表明,MoP的催化特性与其比表面积、还原度和表相组成有关,比表面积大、还原度适中和表相Moδ+/Pδ-比适中的磷化钼具有更高的催化活性; 650～700 ℃为最合适的还原温度,高于或低于该温度时所制备的MoP催化剂活性均大幅度下降. 在合适的条件下,MoP催化剂对噻吩HDS,吡啶HDN和环己烯HYD的转化率可分别达到94.3%,100.0%和90.3%.     

Ancient coins: cluster analysis applied to find a correlation between corrosion process and burial soil characteristics

Although it is well known that any material degrades faster when exposed to an aggressive environment as well as that "aggressive" cannot be univocally defined as depending also on the chemical-physical characteristics of material, few researches on the identification of the most significant parameters influencing the corrosion of metallic object are available.A series of ancient coins, coming from the archaeological excavation of Palazzo Valentini (Rome) were collected together with soils, both near and far from them, and then analysed using different analytical techniques looking for a correlation between the corrosion products covering the coins and the chemical-physical soil characteristics. The content of soluble salts in the water-bearing stratum and surfacing in the archaeological site, was also measured.The obtained results stress the influence of alkaline soils on formation of patina. Cerussite, probably due to the circulation of water in layers rich in marble and plaster fragments, was the main corrosion product identified by X-ray Diffraction (XRD). Copper, lead and vanadium were found in soil surrounding coins. By measuring conductivity, pH and soluble salts content of the washing solutions from both coins and soils, we could easily separate coins coming from different stratigraphic units of the site.Data were treated by cluster and multivariate analysis, revealing a correlation between part of the coins and the nearby soil samples.