Validation of an LC-MS/MS method for the quantitative determination of a novel fungicide: pyraoxystrobin in rat plasma and its application to a toxicokinetics study

A simple, sensitive, and reliable liquid chromatography tandem mass spectrometry (LC-MS/MS) method has been developed for determination of pyraoxystrobin in rat plasma and applied to a toxicokinetics study. The separation was performed by gradient elution on a Luna 5 μ C18 (2) 100 Å column (50?×?4.6 mm I.D., 5 μm) with mobile phase: water (0.1 % formic acid, v/v)/acetonitrile (0.1 % formic acid, v/v), followed by quantification with a mass detector in multiple reaction monitoring (MRM) mode using ESI as an interface. The calibration curve was linear over a concentration range of 1.00–200 ng/mL. The recovery for pyraoxystrobin ranged from 101.4 to 108.2 %. The intraday bias and precision ranged from ?9.3 to 8.1 % and from 0.7 to 8.4 %, respectively, and the interday bias and precision ranged from ?0.3 to 4.0 % and from 4.4 to 7.2 %, respectively. The toxicokinetics of pyraoxystrobin after single 100 and 1,000 mg/kg oral doses were studied in rats. Figure

The chromatogram of pyraoxystrobin highest calibration standard (ULOQ) extract.     

GPCR A2A AR腺苷受体蛋白的激动剂结合及其诱导的蛋白活性开关构象变化

运用分子动力学模拟,研究了腺苷酸（激动剂）与A2AAR腺苷受体蛋白的相互作用和配体结合诱导的蛋白动力学变化．识别了与腺苷酸结合力强于0．5kcal／mol的关键基团：A63^2．61,I66^2．64,V84^3.32,L85^3.33,T88^3.36,F168^5.29,M177^5.38,L249^6.51,H250^6.52和N253^6.55,观察到腺苷酸没有与L167^5.28相互作用,这一结果支持了L167^5.28是抑制剂特异性结合位点,不与激动剂结合．未结合配体（激动剂或抑制剂）的单体A2AAR和腺苷酸结合后的A2AAR在构象上有三个不同功能性开关．腺苷酸结合可以诱导A2AAR腺苷受体蛋白的构象调整,使得三个功能性开关器件的构象与单体A2AAR不同．     

Energetic Salts Based on an Oxygen‐Containing Cation: 2,4‐Diamino‐1,3,5‐triazine‐6‐one

A family of energetic salts with high thermal stability and low impact sensitivity based on an oxygen‐containing cation, 2,4‐diamino‐1,3,5‐triazine‐6‐one, were synthesized and fully characterized by IR and multinuclear (¹H, ¹³C) NMR spectroscopy, elemental analysis, and differential scanning calorimetry. Insights into their sensitivities towards impact, friction, and electrostatics were gained by submitting the materials to standard tests. The structures of 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate, 2,4‐diamino‐1,3,5‐triazine‐6‐one sulfate, 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, 2,4‐diamino‐1,3,5‐triazine‐6‐one 5‐nitrotetrazolate were determined by single‐crystal X‐ray diffraction; their densities are 1.691, 1.776, 1.854, and 1.636 g cm^?3, respectively. Most of the salts decompose at temperatures over 180 °C; in particular, the salts 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate and 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, which decompose at 303.3 and 336.4 °C, respectively, are fairly stable. Furthermore, most of the salts exhibit excellent impact sensitivities (>40 J), friction sensitivities (>360 N), and are insensitive to electrostatics. The measured densities of these energetic salts range from 1.64 to 2.01 g cm^?3. The detonation pressure values calculated for these salts range from 14.6 to 29.2 GPa, and the detonation velocities range from 6536 to 8275 m s^?1; these values make the salts potential candidates for thermally stable and insensitive energetic materials.     

Raman spectroscopy measurement of levofloxacin lactate in blood using an optical fiber nano‐probe

Liquid chromatography and mass spectrometry were time‐consuming and expensive as the main methods for the drug analysis at present, and the samples must be pretreated. The Raman spectroscopy measurement methods were fast and simple, so the Raman spectroscopy methods for the drug analysis were explored in this paper. An optical fiber nano‐probe coated with gold nanoparticles was fabricated and used with surface‐enhanced Raman spectroscopy (SERS) to measure levofloxacin lactate. The resulting SERS spectra of levofloxacin lactate in mouse blood that was detected by the optical fiber nano‐probe clearly showed the characteristic wave numbers of levofloxacin lactate, indicating that optical fiber nano‐probes can be used with spectral techniques to analyze drugs in vitro or potentially even in vivo. Copyright © 2015 John Wiley & Sons, Ltd.     

The Comparative Study of Reaction Mechanisms and Catalytic Performances of Cu–SSZ-13 and Fe–SSZ-13 for the NH3-SCR Reaction

Catalysis Surveys from Asia - The catalytic performances and mechanism differences of model catalysts Cu–SSZ-13 and Fe–SSZ-13 with similar metal content and Si/Al ratio were compared....     

Sigma-1 Receptor Agonist TS-157 Improves Motor Functional Recovery by Promoting Neurite Outgrowth and pERK in Rats with Focal Cerebral Ischemia

Sigma-1 (σ-1) receptor agonists are considered as potential treatment for stroke. TS-157 is an alkoxyisoxazole-based σ-1 receptor agonist previously discovered in our group. The present study describes TS-157 profile in a battery of tests for cerebral ischemia. Initial evaluation demonstrated the compound’s safety profile and blood–brain barrier permeability, as well as its ability to induce neurite outgrowth in vitro. The neurite outgrowth was shown to be mediated via σ-1 receptor agonism and involves upregulation of ERK phosphorylation (pERK). In particular, TS-157 also significantly accelerated the recovery of motor function in rats with transient middle cerebral artery occlusion (tMCAO). Overall, the results herein support the notion that σ-1 receptor agonists are potential therapeutics for stroke and further animal efficacy studies are warranted.     

紫外光辐照对TiO2纳米线电输运性能的影响及磁阻效应研究

采用溶胶凝胶法以及静电纺丝法, 利用热处理工艺, 成功制备出了多晶锐钛矿型TiO₂纳米线, 通过两线法在室温下测试单根TiO₂纳米线的V-I曲线来研究其电输运性能及磁阻效应. 结果表明: 在无光照环境下其V-I曲线为不过零点的直线, 零场电阻较大, 在磁场作用下电阻下降, 表现出负磁阻效应; 紫外光辐照环境下TiO₂纳米线载流子浓度增加使得电阻变小, 然而在磁场作用下电阻增大, 表现为正磁阻效应. 紫外光辐照导致的载流子浓度变化, 使得负磁阻转变为正磁阻, 我们将磁阻变化归结为d电子局域导致的负磁阻与能带劈裂导致的正磁阻两种机理相互竞争的结果.     

纤维素直接催化转化制乙二醇及其他化学品:从基础研究发现到潜在工业应用(英)

纤维素直接催化转化制乙二醇是一条极具吸引力的生物质转化途径,有助于减轻化石能源资源的消耗。综述了从该反应途径的发现到获得高效、高稳定性催化剂的快速发展过程。基于对钨基催化剂的大量研究结果,本文讨论了反应机制,明确了反应路径、催化剂状态、钨物种及加氢催化活性中心各自在串联反应中的作用。围绕该反应过程的工业化应用需要,讨论了有关原生木质纤维素生物质催化转化以及高效反应过程的发展策略。在此基础上,将纤维素催化转化制乙二醇过程与生物质发酵制丙酮-丁醇-乙醇的生物炼制路线进行整合,构建出一个理想的反应过程潜在应用范例。最后,对纤维素催化转化制乙二醇反应过程进行了总结和前景展望.     

Stepwise Assembly of Turn-on Fluorescence Sensors in Multicomponent Metal–Organic Frameworks for in Vitro Cyanide Detection

The controlled synthesis of multicomponent metal–organic frameworks (MOFs) allows for the precise placement of multiple cooperative functional groups within a framework, leading to emergent synergistic effects. Herein, we demonstrate that turn-on fluorescence sensors can be assembled by combining a fluorophore and a recognition moiety within a complex cavity of a multicomponent MOF. An anthracene-based fluorescent linker and a hemicyanine-containing CN⁻-responsive linker were sequentially installed into the lattice of PCN-700. The selective binding of CN⁻ to hemicyanine inhibited the energy transfer between the two moieties, resulting in a fluorescence turn-on effect. Taking advantage of the high tunability of the MOF platform, the ratio between anthracene and the hemicyanine moiety could be fine-tuned in order to maximize the sensitivity of the overall framework. The optimized MOF-sensor had a CN⁻-detection limit of 0.05 μm , which is much lower than traditional CN⁻ fluorescent sensors (about 0.2 μm ).