Synthesis of Highly Porous Organic/Inorganic Hybrids by Ambient Pressure Sol-Gel Processing

This paper reports the synthesis of highly porous organic/inorganic hybrids by a two-step acid-base catalyzed sol-gel process and ambient pressure drying. In the method organic and inorganic precursors are copolymerized so as to incorporate organic ligands into the solid network. The two-step acid-base catalyzed process was used to prevent phase segregation during the hydrolysis and co-condensation of organic and inorganic precursors. The organic ligands incorporated into the solid gel network modify the surface chemistry. Thus, the wetting angle is significantly increased so that the collapse of the gel network is greatly reduced upon the removal of pore fluid during drying. Organic/inorganic hybrids with BET surface areas above 1250 m2/g, porosities above 75% and pore sizes of 8 nm have been synthesized.     

Study on the effects of fluorine and oxygen deficiency on YBa2Cu307 byab initio method

The calculations of clusters modeling the fluorine-doping and oxygen deficiency of YBa₂Cu₃0₇ have been performed by the method of all-electronab initio Hartree-Fock with self-consistent crystal field. Results show that in CuO planes electric charge significantly increases, the chemical valence of Cu decreases and the covalent bonding of Cu-O greatly weakens owing to oxygen deficiency, while the effect of F restores the local electronic structure of YBa₂Cu₃O₇. The reported opinion that F occupied the oxygen vacancy in Cu-O chains seems disputable according to the calculated bonding characteristics Project supported by the National Natural Science Foundation of China.     

Total synthesis of (+)-aspidospermidine: a new strategy for the enantiospecific synthesis of aspidosperma alkaloids

A new strategy was developed for the enantiospecific synthesis of aspidosperma alkaloids. The key steps involve a novel ketene-lactonization reaction of a chiral vinyl sulfoxide to efficiently set up the quaternary carbon center, and a tandem Michael addition-alkylation reaction sequence to form the polycyclic core structure. This new strategy was employed in the total synthesis of natural product (+)-aspidospermidine.     

芳香叔胺引发丙烯腈光聚合研究

我们发现芳香叔胺是丙烯腈聚合极有效的光引发剂。芳香叔胺苯环上氢被正性基取代时,引发能力增加,被负性基取代时,引发能力下降。下列胺的活性次序是:N,N-二甲基对甲苯胺(DMT)>N,N-二羟乙基对甲苯胺(DHET)>N,N-二甲基苯胺(DMA)>N,N-二甲胺基苯甲醛(DMB)>N,N-二甲基对硝基苯胺(DNA)。芳香叔胺引发丙烯腈光聚合属自由基机构,聚合速度与叔胺浓度的0.66次方成正比。在叔胺浓度为10~(-2)—10~(-4)M范围内,聚合物平均聚合度的倒数与叔胺浓度的0.5次方成正比。初步认为在紫外光激发下,芳香叔胺与丙烯腈分子生成激发态电子转移络合物,再分解产生自由基,引发丙烯腈聚合。     

二乙基二硫代氨甲酸银体系流动注射法测定砷

本文设计了一种ＡｇＤＤＣ流动注射－分光光度法测定砷的系统。该系统采用自制的氢化物发生及吸装置，将液体流路和载气流路结合在一起。     

双酚-S-双(3-甲基丙烯酰氧基-2-羟丙基)醚的聚合及其应用

以MMA为起始原料经转变为GMA,再与双酚-S反应合成了一种新的含有砜基的交联剂BisS-GMA。这种双酚-S型交联剂与MMA可以顺利地用紫外光或BPO-胺体系引发聚合。新的双酚-S型交联剂BisS-GMA与双酚-A型交联剂Bis-GMA相比,具有活性高与粘结强度高两个显著优点。它还可以和二氧化硅填料混合组成复合树脂,经光引发或BPO-DHET体系引发聚合,得到的复合树脂其物性已达到国外同类产品的水平。DHET作为促进剂要比DMT性能好,前者配制的交联剂液体组份贮存稳定性好,经半年后而不“失活”,后者配制的液体组份则在较短的时间内“失活”。     

A spectroscopic study of cobalt(III) furyldioximates

Summary The electronic properties of a series of cobalt(III)trans-furyldioximato-complexes of the type [CoB(FH)₂X] (B=NH₃, X=Cl, Br, I or NO₂; B=pyridine (py) or thiocarbamide (thio), X=Cl or Br; B=imidazole (imid), X=Br), [Co(FH₂)(FH)Cl₂] and [Co(thio)₂(FH)₂]NO₃ were studied by i.r., u.v. and¹H and¹³C n.m.r. spectra The results were compared with those from the corresponding dimethylglyoximato-complexes. It was concluded that -conjugation over the equatorial plane in the furyldioximates is greater than in the dimethylglyoximates. There is some evidence of thetrans-influence of the anionic ligands in the ammines which are in the order NO ₂ ^– >Br^–>Cl^–.     

用裂解气相色谱法对几株霉菌的分析

本文用带有PYR-2A管式炉裂解器和C-R2AX计算机的岛津GC-9A气相色谱仪,对3株曲霉和3株青霉进行了裂解气相色谱鉴别。通过对指纹图的分析,能够较好地区分出两属之间和各菌株之间的差异,证明了裂解气相色谱分析法用于霉菌鉴别的可能性。     

STRUCTRE AND PROPERTIES OF COMPOSITE Ni/HARD CARBON FILMS PREPARED BY PLASMA DEPOSITION

IntroductionHardcarbonfilmsprcparcdb}'vari0usplasmaprocesscsareofc0nsidcrablcinterestbccauscofthcirunusualmcchanical-opticalandelcctricalpropertiesll~3l.Rccently,ithasReceive(IJl111c5,l9`)5;,.`,1iis()tI1ie)\tioII,1'ceil'edJtl1)'l4,l995*'I11isprojectiss[1pportcdh}tl1cNatiol1a1Nat[lntlScicl1ccI`()ul1dati()l1ofCl1il1aal1dtl1eI,aboraton'ofSolidI,ubricati()l1,l.al1/l10ulnstitutcofCl1cn1icalPh\'sics,111cChincscAcadcl11\'ofScicnccs.benfoundthattheinc0rporati0nofmetaIintocarbonfilmscangrcatl}'…     

Chromatographic characterization of molecularly imprinted microspheres for the separation and determination of trimethoprim in aqueous buffers

Molecularly imprinted microspheres (MIMs) against trimethoprim (TMP), prepared by aqueous microsuspension polymerization, bound strongly to TMP, by electrostatic and other non-covalent interactions. The effects of pH, kind and ionic strength (I) of buffer on capacity factors (k') have been discussed in detail. The capacity factors for TMP increased with increasing pH of both acetate and phosphate buffers. The effects of ionic strength on capacity factors were very substantial and the linear relationship between logk' and logI was described by the equation logk'=0.3162-0.4420logI with R=-0.9995. The results showed that pH 3.5 acetate buffer (0.05 mol L(-1)) containing 0.1 mol L(-1) sodium chloride and a 1:9 ratio of buffer to methanol were the optimum conditions for separation and determination of TMP. The calibration plot of peak area against concentration was linear with R=0.9979.