应用地质累积指数评价成都市河流表层沉积物重金属污染

根据流经成都市内的三条河流(府河、南河、沙河)表层沉积物重金属资料,应用地质累积指数法对重金属污染进行了评价研究。结果表明,河流主要的重金属污染物是Cr,地质累积指数分级多在0~1之间,属于无污染-中度污染范畴。     

聚吡咯/多壁碳纳米管及其聚氨酯导电复合材料的制备和性能

以羧基化多壁碳纳米管(MWCNTs)做模版剂,采用化学氧化法将吡咯(Py)在羧基化MWCNTs表面聚合制备PPy/MWCNTs导电材料,将其添加到溶剂型聚氨酯(PU)溶液中制备了PPy/MWCNTs/PU导电复合材料,研究了Py用量对PPy/MWCNTs及其PU复合材料性能的影响.研究表明,随Py用量的增加,PPy/MWCNTs的长度不变,管径增大,sp~2和sp~3杂化C含量先提高后减少,N的掺杂梯度降低,PPy/MWCNTs的导电率高于羧基化MWCNTs和PPy.当Py用量为羧基化MWCNTs的20%时,其导电率最大.PPy/MWCNTs中N元素的掺杂程度及其管径变化是引起PPy/MWCNTs/PU复合材料的性能不同的主要原因.增加Py用量,MWCNTs中亲水的羧基因对PPy掺杂而消耗,相同导电材料用量时纳米导电粒子数目相对减少,PPy/MWCNTs/PU复合材料的耐水性能提高,定向应力、储能模量和玻璃化温度降低,导电率先增加后减小.当Py用量为羧基化MWCNTs的15%时,导电率最大.     

The DC Conductive Property of KTiOPO4 Crystal along its Z-Axis

The anomalous DC electrical conductive property of the KTP crystal along its z-axis is reported in this paper. The DC conductivity strongly depends on the measuring voltage. No Ohmic regime exists in the current-voltage relation. Ionic polarization occurs under high DC stresses. Electrode reactions were also observed. The phenomena are related to the easy movement of ions along the z-axis of the KTP crystal.     

Simultaneous determination of cucurbitacin IIa and cucurbitacin IIb of Hemsleya amabilis by HPLC–MS/MS and their pharmacokinetic study in normal and indomethacin‐induced rats

A selective and sensitive HPLC–MS/MS method was developed for the simultaneous determination of cucurbitacin IIa (cuIIa) and cucurbitacin IIb (cuIIb), the major bioactive cucurbitacins of Hemsleya amabilis, in rat plasma using euphadienol as internal standard (IS). After liquid–liquid extraction with dichloromethane, separation was achieved on a Syncronis HPLC C₁₈ column (150 mm × 4.6 mm, 5 μm) using an isocratic mobile phase system consisting of acetonitrile–water (85:15, v/v) at a flow rate of 0.6 mL/min with a split ratio of 1:2. Detection was performed on a TSQ Quantum Ultra mass spectrometer equipped with an positive‐ion electrospray ionization source. The lower limits of quantification (LLOQs) were 0.25 and 0.15 ng/mL for cuIIa and cuIIb, respectively. The intra‐ and inter‐day precision was <11.5% for the LLOQs and each quality control level of the analytes, and accuracy was between ?9.1 and 7.6%. The extraction recoveries of the analytes and IS from rat plasma were all >87.1%. The method was fully validated and applied to compare the pharmacokinetic profiles of the two cucurbitacins in rat plasma after oral administration of H. amabilis extract between normal and indomethacin‐induced rats. Copyright © 2016 John Wiley & Sons, Ltd.     

An Atomically Precise Au10Ag2 Nanocluster with Red–Near‐IR Dual Emission

A red–near‐IR dual‐emissive nanocluster with the composition [Au₁₀Ag₂(2‐py?C≡C)₃(dppy)₆](BF₄)₅ ( 1 ; 2‐py?C≡C is 2‐pyridylethynyl, dppy=2‐pyridyldiphenylphosphine) has been synthesized. Single‐crystal X‐ray structural analysis reveals that 1 has a trigonal bipyramidal Au₁₀Ag₂ core that contains a planar Au₄(2‐py?C≡C)₃ unit sandwiched by two Au₃Ag(dppy)₃ motifs. Cluster 1 shows intense red–NIR dual emission in solution. The visible emission originates from metal‐to‐ligand charge transfer (MLCT) from silver atoms to phosphine ligands in the Au₃Ag(dppy)₃ motifs, and the intense NIR emission is associated with the participation of 2‐pyridylethynyl in the frontier orbitals of the cluster, which is confirmed by a time‐dependent density functional theory (TD‐DFT) calculation.     

Metal‐Free Reaction of ortho‐Carbonylated Alkynyl‐Substituted Arylaldehydes with Common Amines: Selective Access to Functionalized Isoindolinone and Indenamine Derivatives

Herein we describe a reaction of ortho‐carbonylated alkynyl‐substituted arylaldehydes with common primary amines that can provide functionalized isoindolinone and 3‐hydroxylindenamine products in high yields. Depending on the substituent size of primary amines, two distinct reaction pathways were exploited selectively, that are, an initial aza‐conjugate addition followed by hydrogen transfer to access isoindolinone framework and a unique oxa‐conjugate addition followed by Petasis–Ferrier rearrangement to afford indenamine derivatives. In the presence of Et₃N, the reaction property of small primary amines was changed, proceeding to afford 3‐hydroxylindenamine derivatives efficiently. These products contain interesting substructures that exist in many natural products and bioactive molecules. The reaction features contain the use of transition‐metal‐free catalysts, simple operation, broad substrate scope, and product diversity.     

The intersection marker method for 3D interface tracking of deformable surfaces in finite volumes

Currently, the majority of computational fluid dynamics (CFD) codes use the finite volume method to spatially discretise the computational domain, sometimes as an array of cubic control volumes. The Finite volume method works well with single‐phase flow simulations, but two‐phase flow simulations are more challenging because of the need to track the surface interface traversing and deforming within the 3D grid. Surface area and volume fraction details of each interface cell must be accurately accounted for, in order to calculate for the momentum exchange and rates of heat and mass transfer across the interface. To attain a higher accuracy in two‐phase flow CFD calculations, the intersection marker (ISM) method is developed. The ISM method is a hybrid Lagrangian–Eulerian front‐tracking algorithm that can model an arbitrary 3D surface within an array of cubic control volumes. The ISM method has a cell‐by‐cell remeshing capability that is volume conservative and is suitable for the tracking of complex interface deformation in transient two‐phase CFD simulations. Copyright © 2015 John Wiley & Sons, Ltd.     

Polymer-precursor-derived (am-) SiC/TiC composites for resistive heaters in large volume multi-anvil high pressure/high-temperature apparatus

(Amorphous-)SiC/TiC composites for resistive tubular heaters in HP/HT experiments were obtained via a polymer-precursor process. A slurry consisting of a commercial SiC-precursor polymer (allylhydridopolycarbosilane, AHPCS) and TiC powder as conductive filler was applied to the inner walls of zirconia insulation tubes, using a centrifugation-casting method. Resistive coatings with homogeneous thickness of ～200 μm were obtained. The heaters were tested in octahedral multi-anvil assemblies at ～10 GPa with simultaneous recording of heating voltage and current. Up to a maximum temperature of ～1800°C they showed temperature vs. power characteristics reproducible from batch to batch, with resistance decreasing from 0.08 to 0.02 Ω during heating. Microstructural characterization using SEM/EDX was carried out on the recovered SiC/TiC composite material, as well as on pristine resistive heaters directly after coating and curing to 230°C, and after additional pyrolysis at 900°C in argon. In all cases, a stable composite microstructure of an interpenetrating network of TiC particles with either silicon carbide polymer precursor or an amorphous SiC phase were found. The composites were characterized by XRD and thermogravimetry. Further improvement of coating procedure and materials combination (precursor/filler/insulator substrate) may result in advanced coatings, operational well beyond 2000°C.     

Automated determination of size and morphology information from soot transmission electron microscope (TEM)-generated images

The thermophoretic sampling of particulates from hot media, coupled with transmission electron microscope (TEM) imaging, is a combined approach that is widely used to derive morphological information. The identification and the measurement of the particulates, however, can be complex when the TEM images are of low contrast, noisy, and have non-uniform background signal level. The image processing method can also be challenging and time consuming, when the samples collected have large variability in shape and size, or have some degree of overlapping. In this work, a three-stage image processing sequence is presented to facilitate time-efficient automated identification and measurement of particulates from the TEM grids. The proposed processing sequence is first applied to soot samples that were thermophoretically sampled from a laminar non-premixed ethylene-air flame. The parameter values that are required to be set to facilitate the automated process are identified, and sensitivity of the results to these parameters is assessed. The same analysis process is also applied to soot samples that were acquired from an externally irradiated laminar non-premixed ethylene-air flame, which have different geometrical characteristics, to assess the morphological dependence of the proposed image processing sequence. Using the optimized parameter values, statistical assessments of the automated results reveal that the largest discrepancies that are associated with the estimated values of primary particle diameter, fractal dimension, and prefactor values of the aggregates for the tested cases, are approximately 3, 1, and 10 %, respectively, when compared with the manual measurements.     

不同滤波方法对揭示全球海洋条带结构的比较

海洋条带结构是近年物理海洋学研究的一个新热点. 在海洋中, 条带结构往往被大尺度环流过程所掩盖. 把这种隐蔽的海水运动现象显现出来的办法是对时间平均的速度场进行空间滤波. 利用全球简单海洋资料同化分析系统资料和中国科学院大气物理研究所大气科学和地球流体力学数值模拟国家重点实验室的气候系统海洋模式模拟数据对三种一维滤波方法进行了比较, 分别是常用的高斯和汉宁滤波方法, 以及本文引入的切比雪夫滤波方法. 结果表明, 尽管三种方法均可获得条带结构, 但以切比雪夫方法为最佳; 另外, 设计高通滤波器时需设定截断频率, 而它的选定取决于对具体数据的频谱分析, 当选取的归一化的截断频率值在0.1和0.4之间时, 可以有效地揭示出条带结构在全球海域内的分布. 因此本文的研究方法为海洋条带结构的深入研究提供了一个有力工具.