苄嘧磺隆印迹聚合物的波谱分析及吸附性能研究

以苄嘧磺隆为模板分子, α-甲基丙烯酸为功能单体, 三甲氧基丙烷三甲基丙烯酸酯为交联剂, 二氯甲烷为致孔剂, 在20 ℃温度下, 采用紫外引发沉淀聚合方法制备了苄嘧磺隆分子印迹聚合物. 紫外光谱和核磁共振氢谱实验提示了聚合前模板分子与功能单体之间的相互作用主要是分子间氢键, 分子间氢键相互作用能和双氢键的键距由Hyperchem 7.0和Gaussian 03W软件分别计算为: －28.6163 kJ/mol和0.179～0.181 nm. 制备的印迹聚合物在高效液相色谱和吸附动力学实验中都表现出对模板分子有较强的吸附作用.     

Multi-Sensor Vibration Signal Based Three-Stage Fault Prediction for Rotating Mechanical Equipment

In order to reduce maintenance costs and avoid safety accidents, it is of great significance to carry out fault prediction to reasonably arrange maintenance plans for rotating mechanical equipment. At present, the relevant research mainly focuses on fault diagnosis and remaining useful life (RUL) predictions, which cannot provide information on the specific health condition and fault types of rotating mechanical equipment in advance. In this paper, a novel three-stage fault prediction method is presented to realize the identification of the degradation period and the type of failure simultaneously. Firstly, based on the vibration signals from multiple sensors, a convolutional neural network (CNN) and long short-term memory (LSTM) network are combined to extract the spatiotemporal features of the degradation period and fault type by means of the cross-entropy loss function. Then, to predict the degradation trend and the type of failure, the attention-bidirectional (Bi)-LSTM network is used as the regression model to predict the future trend of features. Furthermore, the predicted features are given to the support vector classification (SVC) model to identify the specific degradation period and fault type, which can eventually realize a comprehensive fault prediction. Finally, the NSF I/UCR Center for Intelligent Maintenance Systems (IMS) dataset is used to verify the feasibility and efficiency of the proposed fault prediction method.     

可调谐二极管激光吸收光谱法测量气体温度

研究了一种新型的非接触式测温技术——可调谐二极管激光吸收光谱(TDLAS)测温技术。介绍了温度测量及调制吸收光谱技术原理,分析了调制幅度对气体温度测量的影响。优选了氧气吸收谱线对13163.78 cm-1和13164.18 cm-1,在搭建的高温实验系统上,实现了气体温度和浓度的同时测量。通过分析实测波形获得了谱线13164.18 cm-1在823~1323 K温度范围内的碰撞展宽系数和温度指数。实验结果表明,在823~1323 K温度范围内,系统温度测量的线性误差为0.65%,最大波动为±15 K。     

Computational Aspect for Function-Valued Padé-Type Approximation

The computational problems of two special determinants are investigated. Those tion for computing Fredholm integral equation of the second kind. The main tool to be used in this paper is the well-known Schur complement theorem.     

Propagation characteristics of linearly polarized Bessel-Gaussian beams through an annular apertured paraxial ABCD optical system

By means of Collins diffraction integral formula in the paraxial approximation and based on the fact that a hard aperture function can be expanded into a finite sum of complex Gaussian functions, an approximate analytical expression for linearly polarized Bessel-Gaussian beams passing through a paraxial ABCD optical system with an annular aperture has been derived. The results provide more convenient for studying their propagation and transformation than the usual way by using diffraction integral directly. By using the analytical expression and the diffraction integral formula some numerical simulations are done to illustrate for the propagation characteristics of a linearly polarized Bessel-Gaussian beam through an optical system with an annular aperture.     

Novel optical film sensor design based on p-polarized reflectance

A new scheme of optical film sensor is presented. The sensor is based on p-polarized reflectance, consisting of a sensing coated substrate, is easily optimized for maximum sensitivity in different applications. The resolutions of refractive index n_f, extinction coefficient k_f and thickness h_f of the sensitive films are predicted to be 10⁻⁷, 10⁻⁵ and 10⁻³ nm, respectively. Experimentally, we selected the sol–gel derived SnO₂ films as gas-sensitive films and conducted preliminary gas-sensing test. The results indicate that novel optical film sensor scheme has higher sensitivity, and the detection sensitivity is available to 10⁻¹ ppm on the condition of optimum optical parameters and incident angle.     

Investigation of the chemical state of ultrathin Hf-Al-O films during high temperature annealing

Al₂O₃ incorporated HfO₂ films grown by atomic layer deposition (ALD) were investigated by high-resolution X-ray photoelectron spectroscopy (HRXPS). The core level energy state of a 15 Å thick film showed a shift to higher binding energy, as the result of a silicate formation and Al₂O₃ incorporation. The incorporation of Al₂O₃ into the HfO₂ film had no effect on silicate formation at the interface between the film and Si, while the ionic bonding characteristics and hybridization effects were enhanced compared to a pure HfO₂ film. The dissociation of the film in an ultrahigh vacuum (UHV) is effectively suppressed compared to a pure HfO₂ film, indicating an enhanced thermal stability of Hf-Al-O. Any dissociated Al₂O₃ on the film surface was completely removed into the vacuum by vacuum annealing treatment over 850 °C, while HfO₂ contributed to Hf silicide formation on the film surface.     

Giant lamb shift in photonic crystals

We obtain a general result for the Lamb shift of excited states of multilevel atoms in inhomogeneous electromagnetic structures and apply it to study atomic hydrogen in inverse-opal photonic crystals. We find that the photonic-crystal environment can lead to very large values of the Lamb shift, as compared to the case of vacuum. We also suggest that the position-dependent Lamb shift should extend from a single level to a miniband for an assembly of atoms with random distribution in space, similar to the velocity-dependent Doppler effect in atomic/molecular gases.     

一种基于数字全息技术的盲音频水印算法

提出了一种基于数字全息技术的盲音频水印算法.水印图像经随机相位调制形成物光波,该物光波的傅里叶变换与参考光波发生干涉,形成傅里叶变换全息图.再利用离散余弦变换的能量压缩能力,通过量化算法把降维的水印,即傅里叶变换全息图嵌入音频信号中,在水印提取过程中不需要原始音频信号的参与.仿真实验表明,该算法对低通滤波、噪音干扰特别是剪裁具有一定的稳健性.