Enantioselective Hydrogenation of Endocyclic Enones:the Solution to a Historical Problem

The enantioselective hydrogenation of endocyclic enones has been a historical problem for homogeneous catalysis.We herein report an efficient method to reduce e...     

Fixed-Time Leader-Following Consensus Tracking Control for Nonliear Multi-Agent Systems under Jointly Connected Graph

This paper researches the fixed-time leader-following consensus problem for nonlinear multi-agent systems (MASs) affected by unknown disturbances under the jointly connected graph. In order to achieve control goal, this paper designs a fixed-time consensus protocol, which can offset the unknown disturbances and the nonlinear item under the jointly connected graph, simultaneously. In this paper, the states of multiple followers can converge to the state of the leader within a fixed time regardless of the initial conditions rather than just converging to a small neighborhood near the leader state. Finally, a simulation example is given to illustrate the theoretical result.     

工程流体力学关于沿程阻力的教学探讨

针对工程流体力学中沿程阻力知识点的教授,将与其相关的连续性方程、伯努利方程、动量方程、牛顿内摩擦定律、量纲分析、雷诺实验、尼古拉兹实验以及沿程阻力的应用等知识点有机地串联在一起,并传递了"理论推演-量纲分析-实验研究-实例应用"的工程流体力学经典研究方法,构建了以沿程阻力为核心的知识体系,以期为学生学习和教师讲授提供帮助.     

Solid Sampling Pyrolysis Adsorption-Desorption Thermal Conductivity Method for Rapid and Simultaneous Detection of N and S in Seafood

In this work, a rapid method for the simultaneous determination of N and S in seafood was established based on a solid sampling absorption-desorption system coupled with a thermal conductivity detector. This setup mainly includes a solid sampling system, a gas line unit for controlling high-purity oxygen and helium, a combustion and reduction furnace, a purification column system for moisture, halogen, SO₂, and CO₂, and a thermal conductivity detector. After two stages of purging with 20 s of He sweeping (250 mL/min), N₂ residue in the sample-containing chamber can be reduced to <0.01% to improve the device’s analytical sensitivity and precision. Herein, 100 s of heating at 900 °C was chosen as the optimized decomposition condition. After the generated SO₂, H₂O, and CO₂ were absorbed by the adsorption column in turn, the purification process executed the vaporization of the N-containing analyte, and then N₂ was detected by the thermal conductivity cell for the quantification of N. Subsequently, the adsorbed SO₂ was released after heating the SO₂ adsorption column and then transported to the thermal conductivity cell for the detection and quantification of S. After the instrumental optimization, the linear range was 2.0–100 mg and the correlation coefficient (R) was more than 0.999. The limit of detection (LOD) for N was 0.66 μg and the R was less than 4.0%, while the recovery rate ranged from 95.33 to 102.8%. At the same time, the LOD for S was 2.29 μg and the R was less than 6.0%, while the recovery rate ranged from 92.26 to 105.5%. The method was validated using certified reference materials (CRMs) and the measured N and S concentrations agreed with the certified values. The method indicated good accuracy and precision for the simultaneous detection of N and S in seafood samples. The total time of analysis was less than 6 min without the sample preparation process, fulfilling the fast detection of N and S in seafood. The establishment of this method filled the blank space in the area of the simultaneous and rapid determination of N and S in aquatic product solids. Thus, it provided technical support effectively to the requirements of risk assessment and detection in cases where supervision inspection was time-dependent.     

三点起爆形成尾翼EFP的数值模拟和实验研究

利用LS-DYNA软件对三点起爆形成尾翼EFP的过程进行了数值模拟,深入研究了爆轰波传播过程中的波形结构和强度的变化规律以及药型罩材料在复合爆轰波作用下驱动变形的特性和规律,加深了对三点起爆条件下药型罩形成带尾翼EFP机理的认识。在此基础上,设计了三点同步起爆装置和EFP装药进行实验。研究结果表明：设计的三点起爆装置作用可靠,满足三点起爆EFP装药的设计要求;形成的EFP弹形稳定,与计算结果吻合较好;尾翼EFP飞行过程中的速度降减小,稳定性提高。     

快点火锥壳靶内爆自发光图像数据处理

为研究快点火预压缩过程中导引锥对压缩靶丸芯部辐射对称性的影响,在神光Ⅲ原型上开展了快点火预压缩的自发光测量实验。采集了相同长度黑腔中不同类型靶丸的内爆自发光图像和不同长度黑腔中同类靶丸的内爆自发光图像,利用最小二乘椭圆拟合方法对芯部的自发光半峰值强度等高线进行椭圆拟合,通过椭圆特征来分析靶丸在最强发光时刻的压缩对称性。分析结果表明：导引锥的存在会使发光区域沿着赤道方向拉长,降低了压缩对称性;有锥靶丸在1600 m黑腔内的形变小于在1500 m和1700 m黑腔内的形变,压缩对称性可以通过调整黑腔长度来控制。     

复合腔回旋管高频结构

为了提高回旋管的工作效率,高频结构中的模式之间的竞争是急需解决的问题。从模式耦合理论出发系统地研究了回旋管中过渡渐变复合腔的高频场结构,同时考虑了TM型寄生模式对工作模式的影响。通过对耦合系数的分析,为了降低模式之间的耦合程度,采用曲线作为回旋管中高频结构的渐变段。用三维电磁仿真软件和自主开发的程序对高频结构进行计算。计算结果与传统的线性渐变段谐振腔相比,采用非线性类型的谐振腔具有更强的模式抑制能力,并且该类型腔体中能够激励起更强的场幅值。     

全固态模块化MARX电路及脉冲同步叠加设计

选用雪崩三极管作为开关器件,详细讨论了设计和优化Marx电路的方法;将Marx电路进行模块化改进,设计了一种新型四路同步叠加立体结构,并得出了叠加倍数与模块数量的理论关系式。最终,利用+300 V直流电源供电,通过四路输出幅值为-2.6 kV的Marx模块叠加,在50 阻性负载上得到了幅值-5.0 kV、半高脉宽5.3 ns、脉冲能量约2.0 mJ的高斯型脉冲,时延抖动小于100 ps,重复频率达10 kHz,叠加效率达96.2%。调节直流偏置电压为200~300 V,并配合模块数量的增减,可调节脉冲幅值为1.6~5.0 kV。     

含能破片引爆带壳炸药过程的数值模拟

将引爆模拟战斗部等效为带铝壳炸药,设计了一种新型含能破片作为毁伤元,利用非线性有限元LS -DYNA软件对该含能破片侵彻、引爆带壳炸药的作用过程进行了数值模拟。用“升降法”得到了该“含能破片”对不同盖板厚度带壳炸药的引爆速度,同时与普通破片引爆同规格带壳炸药进行了对比,并进行了实验验证。结果表明,通过控制含能破片的撞击速度和含能物质的延迟起爆时间,可有效引爆盖板厚度为8~16mm的带铝壳炸药。

     

导电炭黑微观结构及其应用性能

以乙炔炭黑、副产炭黑和炉法导电炭黑为研究对象,较为系统地分析了与导电炭黑应用性能密切相关的微晶结构、表面性质、颗粒形貌和粒度分布特征,探讨了导电炭黑微观结构对应用性能的影响。研究结果表明,导电炭黑的微观结构决定了其应用性能,而决定应用性能的关键在于其与基体材料的匹配性。副产炭黑在橡胶和塑料中导电性能较好,乙炔炭黑在锂离子电极材料中的导电性能较好。