β‐Cyclodextrin‐Functionalized Gold Nanoparticles/Poly(L‐cysteine) Modified Glassy Carbon Electrode for Sensitive Determination of Metronidazole

A simple electrochemical method was developed to determine metronidazole based on β‐cyclodextrin‐functionalized gold nanoparticles/poly(L ‐cysteine) modified glassy carbon electrode (β‐CD‐GNPs/poly(L ‐cys)/GCE). The electropolymerized film of poly(L ‐cys) provides a stable matrix for the fabrication of a sensing interface. β‐CD‐GNPs can form inclusion complexes with metronidazole and act as a modifier with catalytic function. The modified electrode exhibited excellent electrocatalytic activity towards metronidazole. The reaction of metronidazole at the modified electrode was an irreversible process controlled by diffusion. Under optimum experimental conditions, the logarithm of catalytic currents shows a good linear relationship with that of the metronidazole concentration in the range of 0.1–600 µmol/L with a low detection limit of 14 nmol/L. In addition, the modified electrode exhibited satisfactory stability, sensitivity and reproducibility, and could be applied to the determination of metronidazole in an injection solution.     

A rapid and convenient method for preparative separation of three indissolvable polyphenols from Euphorbia pekinensis by the flexible application of solvent extraction combined with counter‐current chromatography

A rapid and convenient method was established to preparatively isolate the three ellagic acid types of compounds, which were the main polyphenols in Euphorbia pekinensis, by flexibly applying solvent extraction combined with counter‐current chromatography (CCC). The total extract (extracted using 95% ethanol) of E. pekinensis was pretreated by two simple steps before CCC isolation, following the procedure: the total extract was extracted by classical solvent extraction using petroleum ether and ethyl acetate, respectively, and then the ethyl acetate extract was suspended using 95% ethanol, after being allowed to stand overnight, the sediment was obtained. Partial sediment (100 mg) was then directly separated by CCC with a two‐phase solvent system composed of chloroform‐95% ethanol‐water‐85% formic acid (50:50:50:5, v/v/v/v). About 22 mg of 3,3′‐dimethoxy ellagic acid (1), 12 mg of 3,3′‐di‐O‐methyl‐4‐O‐(β‐d ‐xylopyranosyl)ellagic acid (2), and 35 mg of ellagic acid (3) with purities of 96.0, 95.2, and 95.4% were obtained respectively in one step within 4 h. After being purified by washing with methanol, the purities of the three compounds obtained were all above 98%. The purities were determined by HPLC and their chemical structures were further identified by ¹H and ¹³C NMR spectroscopy. The recoveries were calculated as 84.6, 85.7, and 89.5%, respectively. The result demonstrated that the present isolation method was rapid, economical and efficient for the preparative separation of polyphenols from E. pekinensis.     

Chemomics and drug innovation

Chemomics is an interdisciplinary study using approaches from chemoinformatics,bioinformatics,synthetic chemistry,and other related disciplines.Biological systems make natural products from endogenous small molecules (natural product building blocks) through a sequence of enzyme catalytic reactions.For each reaction,the natural product building blocks may contribute a group of atoms to the target natural product.We describe this group of atoms as a chemoyl.A chemome is the complete set of chemoyls in an organism.Chemomics studies chemomes and the principles of natural product syntheses and evolutions.Driven by survival and reproductive demands,biological systems have developed effective protocols to synthesize natural products in order to respond to environmental changes;this results in biological and chemical diversity.In recent years,it has been realized that one of the bottlenecks in drug discovery is the lack of chemical resources for drug screening.Chemomics may solve this problem by revealing the rules governing the creation of chemical diversity in biological systems,and by developing biomimetic synthesis approaches to make quasi natural product libraries for drug screening.This treatise introduces chemomics and outlines its contents and potential applications in the fields of drug innovation.     

Predicting hiCE inhibitors based upon pharmacophore models derived from the receptor and its ligands

Human intestinal carboxyl esterase (hiCE) is a drug target for ameliorating irinotecan-induced diarrhea. By reducing irinotecan-induced diarrhea, hiCE inhibitors can improve the anti-cancer efficacy of irinotecan. To find effective hiCE inhibitors, a new virtual screening protocol that combines pharmacophore models derived from the hiCE structure and its ligands has been proposed. The hiCE structure has been constructed through homology techniques using hCES1’s crystal structure. The hiCE structure was optimized via molecular dynamics simulations with the most known active hiCE inhibitors docked into the structure. An optimized pharmacophore, derived from the receptor, was then generated. A ligand-based pharmacophore was also generated from a larger set of known hiCE inhibitors. The final hiCE inhibitor predictions were based upon the virtual screening hits from both ligand-based and receptor-based pharmacophore models. The hit rates from the ligand-based and receptor-based pharmacophore models are 88% and 86%, respectively. The final hit rate is 94%. The two models are highly consistent with one another (85%). This proves that both models are reliable.     

Improved Hydrogen‐Storage Thermodynamics and Kinetics for an RbF‐Doped Mg(NH2)2–2 LiH System

The introduction of RbF into the Mg(NH₂)₂–2 LiH system significantly decreased its (de‐)hydrogenation temperatures and enhanced its hydrogen‐storage kinetics. The Mg(NH₂)₂–2 LiH–0.08 RbF composite exhibits the optimal hydrogen‐storage properties as it could reversibly store approximately 4.76 wt % hydrogen through a two‐stage reaction with the onset temperatures of 80 °C for dehydrogenation and 55 °C for hydrogenation. At 130 °C, approximately 70 % of hydrogen was rapidly released from the 0.08 RbF‐doped sample within 180 min, and the fully dehydrogenated sample could absorb approximately 4.8 wt % of hydrogen at 120 °C. Structural analyses revealed that RbF reacted readily with LiH to convert to RbH and LiF owing to the favorable thermodynamics during ball‐milling. The newly generated RbH participated in the following dehydrogenation reaction, consequently resulting in a decrease in the reaction enthalpy change and activation energy.     

Droplet-based microfluidics for dose–response assay of enzyme inhibitors by electrochemical method

A simple but robust droplet-based microfluidic system was developed for dose–response enzyme inhibition assay by combining concentration gradient generation method with electrochemical detection method. A slotted-vials array and a tapered tip capillary were used for reagents introduction and concentration gradient generation, and a polydimethylsiloxane (PDMS) microfluidic chip integrated with microelectrodes was used for droplet generation and electrochemical detection. Effects of oil flow rate and surfactant on electrochemical sensing were investigated. This system was validated by measuring dose–response curves of three types of acetylcholinesterase (AChE) inhibitors, including carbamate pesticide, organophosphorus pesticide, and therapeutic drugs regulating Alzheimer's disease. Carbaryl, chlorpyrifos, and tacrine were used as model analytes, respectively, and their IC₅₀ (half maximal inhibitory concentration) values were determined. A whole enzyme inhibition assay was completed in 6 min, and the total consumption of reagents was less than 5 μL. This microfluidic system is applicable to many biochemical reactions, such as drug screening and kinetic studies, as long as one of the reactants or products is electrochemically active.     

Microwave‐Assisted Synthesis of Ethyl 1,3‐Disubstituted‐1,6‐dihydropyrrolo[2,3‐c]pyrazole‐5‐carboxylates

A novel series of ethyl 1,3‐disubstituted‐1,6‐dihydropyrrolo[2,3‐c]pyrazole‐5‐carboxylates can be rapidly and efficiently synthesized in excellent yields by condensing a variety of 1,3‐substituted‐4‐formyl‐5‐chloropyrazole with ethyl isocyanoacetate in the presence of 1‐methyl‐3‐butylimidazolium hydroxide under microwave irradiation. The simple experimental procedure, DMSO‐free condition, short period of conversion, and excellent yields are the advantages of the present method. The structures of the novel compounds are confirmed by IR, ¹H NMR, ¹³C NMR, MALDI‐TOF MS, and elemental analysis.     

Colorimetric and bare-eye determination of fluoride using gold nanoparticle agglomeration probes

We report on a sensitive detection scheme for fluoride that is based on a quinone-methide-type of rearrangement reaction to trigger a color change among cloaked gold nanoparticle agglomeration probes. Fluoride ions remove silyl moieties from phenol groups on the surface of the probes, and this causes a quinone-methide-type of rearrangement reaction to occur. This is accompanied by the release of a dithiol in a spontaneous and irreversible reaction at room temperature in aqueous medium. The released dithiol causes aggregation of the AuNPs which leads to a color change from pink-red to violet-blue that can easily be seen with bare eyes.. The generation of color by this cascade reactions is only caused by fluoride and not interfered by any other anions. The assay platform developed here offers a sensitive colorimetric assay for fluoride. The lower limit of detection is 120 μM, and the dynamic concentration range is from 120 μM to 1.5 mM.

Syngas production from methane over CeO2-Fe2O3 mixed oxides using a chemical-looping method

A series of mixed oxides Ce_{1 ? x} Fe _x O₂ was prepared by a hydrothermal method. XRD and Raman spectra were measured to study the structure of the prepared materials. The temperature-programmed reduction was undertaken to estimate reducibility of the oxides. Syngas generation from methane using these materials as oxygen carriers/catalysts via a chemical-looping procedure was investigated in detail. This procedure includes catalytic oxidation and decomposition of methane to produce H₂-rich gas at the first step followed by the production of the CO-rich gas by oxidizing the carbon deposited on deactivated catalysts. The results showed that all iron ions were incorporated into the ceria lattice with the formation of oxygen vacancies in the Ce_0.9Fe_0.1O₂ sample, while isolated Fe₂O₃ particles were distributed on the surface of the Ce_0.8Fe_0.2O₂ sample. TPR measurements and the analysis of the two-step chemical-looping reactions indicated a strong interaction between the Ce and Fe species which accounts for an increased activity of the mixed oxides in the syngas generation compared to that of individual oxides. Among the several samples, the Ce_0.8Fe_0.2O₂ catalyst showed the highest activity for methane partial oxidation due to the synergetic effects caused by the interaction of surface iron entities and Ce-Fe solid solution. In addition, selective oxidation of carbon by oxygen to CO can also be found over this material since gaseous products are formed at the carbon oxidation step with the selectivity to CO reaching 91.2%. Evidence is presented that syngas can be feasibly produced from methane with high selectivity via the chemical-looping procedure over the CeO₂-Fe₂O₃ mixed oxides.