一维新型阶梯函数光子晶体透射特性

研究了阶梯型折射率n₂₂、n₁₁(阶梯分布高度)的大小、对应的分布厚度、不同入射角以及缺陷模对阶梯函数型光子晶体透射特性的影响.由费马原理给出光在函数光子晶体中的运动方程,再由电磁传播理论给出函数光子晶体的传输矩阵,进一步推导出函数光子晶体的透射率以及电场分布的表达式.研究表明,1)随n₂₂,n₁₁大小或者厚度改变,其禁带变宽;2)随光的入射角增加,其禁带变窄;3)当加入缺陷层时,随着缺陷层介质折射率增加,缺陷模强度减小且位置发生红移;4)在函数光子晶体中,缺陷层前电场分布保持不变,而在缺陷层处以及之后的电场强度都明显增强,这不同于常规光子晶体的电场分布仅在缺陷层处局域增强.     

9位芳香基取代超支化聚芴的合成与表征

以2,7-二溴芴酮为起始原料,在芴的9位引入芳香取代基代替传统的烷基取代基,增加9位的稳定性,并用AB+AB2的方法,用新单体合成了不同支化度的超支化聚合物,新合成的超支化聚合物具有良好的热稳定性和发光稳定性.聚合物的热分解温度都在400℃以上;聚合物的薄膜在空气中于200℃加热2 h后没有出现绿光发射带,发光稳定性和烷基聚芴相比得到明显的提高.DSC结果显示,线性聚合物在170℃时有玻璃化转变,超支化聚合物在300℃以内没有明显的相转变,保持一种稳定的无定形态,更有利于提高材料的发光效率.     

甲基肼/四氧化二氮反应化学动力学模型构建及分析

甲基肼(MMH)和四氧化二氮(NTO)是常用的液体火箭发动机推进剂,但目前对其反应机理的研究还十分有限.本文首先构建了一个包含23种组分和20个基元反应的MMH/NTO反应动力学模型;对MMH/NTO自燃着火过程进行的验证计算表明,该机理能够合理地描述MMH/NTO的自燃温升过程,准确预测反应物系统的着火延迟时间及平衡温度,并能合理地反映MMH/NTO反应物系统着火延迟时间对反应初始压力以及氧燃比的依赖关系;通过灵敏度分析方法指出了影响MMH/NTO着火过程的关键反应.模拟分析了在不同压力和氧燃比条件下MMH/NTO系统的自燃温升过程,结果表明,随着压力的升高,系统着火延迟时间变短,平衡温度升高;在一定范围内增大氧燃比,着火延迟时间变长,平衡温度先升高后减小.     

Enhanced nucleation, smoothness and conformality of ultrananocrystalline diamond (UNCD) ultrathin films via tungsten interlayers

Extremely smooth (6 nm RMS roughness over 4 μm²), thin (100 nm), and continuous ultrananocrystalline diamond (UNCD) films were synthesized by microwave plasma chemical vapor deposition using a 10 nm tungsten (W) interlayer between the silicon substrate and the diamond film. These UNCD films possess a high content of sp³-bonded carbon. The W interlayer significantly increased the initial diamond nucleation density, thereby lowering the surface roughness, eliminating interfacial voids, and allowing thinner UNCD films to be grown. This structural optimization enhances the films’ properties and enables its integration with a wide variety of substrate materials.     

On the m order difference sequence space of generalized weighted mean and compact operators

In this article, using generalized weighted mean and difference matrix of order m, we introduce the paranormed sequence space ?(u, v, p; Δ^(m)), which consist of the sequences whose generalized weighted Δ^(m)-difference means are in the linear space ?(p) defined by I.J. Maddox. Also, we determine the basis of this space and compute its α-, β- and γ-duals. Further, we give the characterization of the classes of matrix mappings from ?(u, v, p, Δ^(m)) to ?_∞, c and c₀. Finally, we apply the Hausdorff measure of noncompacness to characterize some classes of compact operators given by matrices on the space ?_p(u, v, Δ^(m))(1 ≤ p < ∞).     

新型含嘧啶的苯氧乙酸酯类衍生物的合成

以对羟基苯甲醛和一氯乙酸为起始原料,经羟醛缩合、关环及酯化等反应合成了6个含有嘧啶杂环的新型苯氧乙酸酯类衍生物,其结构经¹H NMR, ¹³C NMR, IR和HR-ESI-MS表征。     

Optimal Synthesis of Frameworks under Elastic and Plastic Performance Constraints Using Discrete Sections *, †

ABSTRACT

A computer-based method is presented for minimum-weight design of planar frameworks under service and ultimate performance conditions using discrete member sections. Service-load conditions ensure acceptable elastic stresses and displacements, and ultimate-load conditions ensure adequate safety against plastic collapse. The sizes of the discrete sections, which can be of any type; e.g., WF, HSS, etc., may be constrained to satisfy fabrication requirements related to member continuity and structure symmetry. The design method is iterative in nature and remarkably efficient. The number of iterations is generally small and almost totally independent of the complexity of the structure. Several comparative designs for simple truss and frame structures are presented to illustrate features of the method.     

一类含临界增长的多重调和方程组非平凡解的存在性

本文研究了带临界指标的多重调和半线性椭圆方程组.利用变分法,得到了此类方程组非平凡解的存在性和非存在性的条件.     

新型硼氮磷一体化阻燃剂的合成

分别以硼酸、二乙醇胺、三氯氧磷和季戊四醇为原料,经酯化反应制得中间体二乙醇胺硼酸酯（DEAB, 1）和双季戊四醇二氯磷酸酯（SPDPC, 2）; 1与2经缩聚反应合成新型集磷、氮、硼于一体的阻燃剂聚季戊四醇双磷酸酯二磷酰氯螺环二乙醇胺硼酸酯（PPSPSDB, 3）,其结构经¹H NMR, ¹³C NMR和FT-IR表征。考察了溶剂、物料比γ［n(2)：n(1)］、反应温度和反应时间对3产率的影响,结果表明：在最佳反应条件（DMF为溶剂,γ=1 ：1.2, 于120 ℃反应2 h后,于190 ℃反应2 h）下,产率93.26%。热重分析表明：3的初始分解温度为240.5 ℃, 800 ℃时残炭率为44.45%。