A Mechanism of High-Tc Superconductivity Relating to Perovskite Crystal Structure

A mechanism of high-T_c superconductivity related to the perovskite crystal structure is proposed by a “phonon attenuation model”, which means that in the perovskite-like crystal structure, a number of “ordering” vacancies or holes occur due to the non-stoichiometric structure features. Such a reticular “spongly-like” structure facilitates lattice thermovibration attenuation perovskite (phonon attenuation) during temperature reduction. This leads to an abrupt drop of the resistivity, owing to the conduction electrons transmitted through the media without collision with irregularities in the lattice due to the lattice thermovibration. This probably is the main reason for high-T_c superconductivity of the perovskite cuprates.     

A new non-synchronous preparative counter-current centrifuge—the next generation of dynamic extraction/chromatography devices with independent mixing and settling control,which offer a step change in efficiency

A new and significantly more robust design of non-synchronous coil planet centrifuge is introduced where the degree of mixing between two immiscible phases can be changed independently from the “g” field required to separate out the phases. A hypothesis that an optimum ratio between the speed of the bobbin and the speed of the rotor can be found to optimise the efficiency of the separation for a given force field is upheld for an intermediate polarity phase system. This paves the way for extensive further research to find the optimum non-synchronous conditions for a range of different phase systems that are desirable for the separation of large molecules, proteins and biologics but can tend to emulsify in the standard “J” type centrifuge systems currently available and routinely in use for aqueous organic phase systems. A step change of up to 30% in resolution and 90% in plate efficiency is demonstrated.     

Determination of nifursol metabolites in poultry muscle and liver tissue. Development and validation of a confirmatory method

A method is described for the identification and quantitative determination of 3,5-dinitrosalicylic acid hydrazide (DSH), the marker residue of nifursol metabolites in poultry (turkey, broiler) muscle and liver tissue. The method is based on the acid-catalysed hydrolysis of tissue-bound metabolites to free DSH and in situ derivatisation with 2-nitrobenzaldehyde to the corresponding nitrophenyl derivative NPDSH. A structural analogue of DSH, 4-hydroxy-3,5-dinitrobenzoic acid hydrazide (HBH) was synthesised to serve as an internal standard. The analytes were isolated from the matrix by liquid-liquid extraction with ethyl acetate. Determination was performed by LC-MS/MS with negative electrospray ionisation. The [M - H](+) ions of NPDSH and NPHBH at m/z 374 were fragmented by collision induced dissociation (CID) producing transition ions at m/z 182, 183 and 226. The transition ions at m/z 182 and 226 were selected for monitoring of NPDSH while the transition ion at m/z 183 was selected for NPHBH. The method has been validated according to the EU criteria of Commission Decision 2002/657/EC at 0.5, 1.0 and 1.5 microg kg(-1) in muscle and liver tissue. A decision limit (CC(alpha)) was obtained of 0.04 and 0.025 microg kg(-1) in muscle and liver, respectively. Similarly a detection capability (CC(beta)) was obtained of 0.10 and 0.05 microg kg(-1) in muscle and liver, respectively. The introduction of HBH as an internal standard did not lead to a significant improvement of the quantitative performance of the method. In fact for liver better performance characteristics were obtained when the IS was not taken into account. Nevertheless, as a qualitative marker for recovery, HBH could still be very useful in the analysis of unknown samples.     

Surface complexation of carbonate on goethite: IR spectroscopy, structure and charge distribution

The adsorption of carbonate on goethite has been evaluated, focussing on the relation between the structure of the surface complex and corresponding adsorption characteristics, like pH dependency and proton co-adsorption. The surface structure of adsorbed CO3(-2) has been assessed with (1) a reinterpretation of IR spectroscopy data, (2) determination of the charge distribution within the carbonate complex using surface complexation modeling, and (3) evaluation of the proton co-adsorption of various oxyanions, including carbonate, in relation with structural differences. Carbonate adsorption leads to a degeneration of the nu3 IR vibration. Currently, the magnitude of the Deltanu3 band splitting is used as a criterion for metal coordination. However, the interpretation is not unambiguous, since the magnitude of Deltanu3 is influenced by polarization and additional field effects, due to, e.g., H bonding. Our evaluation shows that for goethite the magnitude of band splitting Deltanu3 falls within the range of values that is representative for bidentate complex formation, despite contrarily assignments made in literature. Determination of the charge distribution (CD), derived by modeling available carbonate adsorption data, shows that a very large part (2/3) of the carbonate charge resides in the surface. Interpretation of this result with a bond valence and a ligand charge analysis strongly favors the bidentate surface complexation option for adsorbed carbonate. This option is also supported by the proton co-adsorption of carbonate. The H co-adsorption is very high, which corresponds closely to an oxyanion surface complex in which 2/3 of the ligands are common with the surface. The high H co-adsorption is in conflict with the monodentate option for adsorbed CO3(-2). The study shows that the H co-adsorption of CO3(-2) is almost equal to the experimental H co-adsorption obtained for SeO3(-2) adsorption, which can be rationalized supposing for both XO3(-2) complexes the same ligand distribution in the interface, i.e., bidentate complex formation.     

(P-Bis(pentafluorophenyl) substituted) PCP-pincer Ru(II) complexes: A theoretical study of the molecular structure and electronic properties

The differences between the molecular structures of the PCP-pincer complex [RuCl{C₆H₃(CH₂P(C₆H₅)₂)₂-2,6}(PPh₃)] ([RuCl(PCP^H)(PPh₃)], 1) and its tetrakis-pentafluorophenyl substituted analogue [RuCl{C₆H₃(CH₂P(C₆F₅)₂)₂-2,6}(PPh₃)] ([RuCl(PCP^F20)(PPh₃)], 2) have been rationalised by performing calculations on the cations [Ru(PCP^H)(PPh₃)]⁺ (1cat) and [Ru(PCP^F20)(PPh₃)]⁺ (2cat). The molecular interactions between the chloride ligand and the axial rings, as found in 1 and 2, respectively, have been studied computationally in the model systems [(C₆X₅PH₂)₂Cl⁻] (X = H, F). The calculations on 2cat show that in 2 it is most likely the attractive electrostatic interaction between the chloride ligand and the fluorinated phenyl rings that forces the C_ipso atom to occupy an axial position rather than an equatorial one in the observed (X-ray of 2) square pyramidal arrangement. In 1, however, repulsive steric hindrance forces the PPh₃ ligand to take the apical position. The applicability of the TD-DFT method for the calculation of the electronic spectra of the PCP-pincer compounds 1 and 2 has been tested. The results indicate that the excitation energies calculated for both complexes are in a reasonable agreement with the experimental absorption maxima. However, for 1, all the calculated transition energies are underestimated.     

Overview: The Potential of silanes for chromate replacement in metal finishing industries

Trialkoxysilanes (or silanes) have emerged as a very promising alternative for chromates in metal finishing industries. Compared to the conventional chromating processes, the major merits of silane-based surface treatments include: eco-compliance, easy-control processing, comparable corrosion protection of metals as well as paint adhesion to a variety of topcoats. In this overview paper, we report the recent status of silane studies including results of corrosion performance tests, the mechanism of corrosion protection of metals by silanes and the themal stabilities of silane films. We also address the new fields that we are beginning to explore such as nano-structured silane films, “self-healing” silane films, and “super-primers”.     

Effect of salinity on petroleum biodegradation

Summary The biodegradation of Ashtart crude oil by a mixed bacterial community (EH1) isolated from a marine sediment was investigated in varying concentration of sodium chloride (0 to 2 mol/l). Each fraction of Ashtart crude oil was biodegraded after a 30 day incubation period for a NaCl concentration equivalent to the one of seawater (0.4 mol/l). Saturates were more readily degraded than aromatics. The amount of oil degraded increased initially with increasing salt concentrations to a maximum level for 0.4 mol/l NaCl concentration. Thereafter the amount of oil degraded decreased with increasing salt concentrations. The polar fraction increased for the 0.4 to 1.4 mol/l NaCl concentration range. Asphaltenes were only slightly degraded (10%) for a NaCl concentration equivalent to the one of seawater (0.4 mol/l). NaCl concentrations seemed to affect the relative biodegradation of pristane and phytane. GC, UV fluorescence and FTIR techniques were used to study the evolution of each fraction of Ashtart crude oil.     

Recoil spectrometry: Ion accelerator based elemental characterisation of surface layers

Recoil Spectrometry covers a group of techniques that are very similar to the well known Rutherford backscattering Spectrometry technique, but with the important difference that one measures the recoiling target atom rather than the projectile ion. This makes it possible to determine both the identity of the recoil and its depth of origin from its energy and velocity, using a suitable detector system. The incident ion is typically high-energy (30–100MeV)³⁵C1,⁸¹Br or¹²⁷I. Low concentrations of light elements such as C, O and N can be profiled in a heavy matrix such as Fe or GaAs. Here we present an overview of mass and energy dispersive recoil Spectrometry and illustrate its successful use in some typical applications.