Ladder pyrrolone structures with anthraquinone recurring units

1,2,4,5-Tetraaminoanthraquinone and 1,4,5,8-naphthalene-tetracarboxylic acid dianhydride react in dimethylacetamide to give a tetrameric prepolymer with balanced endgroups of anhydride and diamine. When this prepolymer is carefully treated with polyphosphoric acid at elevated temperature it is converted to a soluble polypyrrolone type structure with an inherent viscosity of 2.3–2.7. Polymers of this molecular weight can be wet-spun into pliable fibers from methanesulfonic acid. The TGA curve in air shows little weight loss below 550°C. The polymer can also be solubilized by reduction with sodium dithionite in alkaline aqueous dimethyl sulfoxide.     

Structure du radical cyano-vinyle CH2=Ċ-CN Etude expérimentale et théorique

Résumé Tout d'abord, on montre par RPE que le radical CH₂=-CN possède à basse température une structure instable pliée et à température plus élevée une structure stable linéaire. Un calcul théorique sur ce radical ainsi que sur le radical butatriényle est en bon accord avec les résultats expérimentaux.

---

The structure of the Cyano-Vinyl Radical CH₂=-CN experimental and theoretical study

First, it is shown by ESR that the radical CH₂=-CN at low temperature presents an unstable bent structure and at higher temperature a stable linear structure. A theoretical calculation on this radical and on the butatrienyl one is in good agreement with the experimental results.

---

Zusammenfassung Aus ESR Messungen wird gefolgert, daß das Radikal CH₂=-CN bei tiefer Temperatur in einer instabilen gebogenen Struktur und bei höherer Temperatur in einer stabilen linearen Struktur vorliegt. Theoretische Berechnungen stehen sowohl für dieses als auch für das Butatrienyl-Radikal in guter Übereinstimmung mit experimentellen Daten.

     

The photo- and electroinitiated polymerization of N-vinyl phthalimide

To elucidate mechanisms in electroinitiated polymerization reactions a comparison was conducted between ultraviolet (UV) photoinitiation and electroinitiation of N-vinyl phthalimide with zinc chloride as a catalyst. Both methods give low yields of a complex polymer product. A detailed analysis, infrared (IR), gel permeation chromatography (GPC), elemental, and molecular weight, conducted on the polymeric products, indicated that phthalimide ring opening was occurring and that complex mixtures of poly(N-vinyl phthalimide) derivatives were formed. Both initiation methods gave comparable results, which further indicated mechanistic similarity between photo-and electroinitiation in these donor–acceptor charge transfer polymerizations.     

Cyclization by the intermediates of phenylthio- and phenoxy carbamoyl. Formation of azasuccinic anhydrides and their polycondensation products. Intervention of the carbamoyl pyridinium cation

The N-(p-nitrophenoxy-carbonyl) derivatives of glycine, DL -alanine and DL -leucine are transformed by the action of pyridine into azasuccinic, 3-methyl-2-azasuccinic and 3-isobutyl-2-azasuccinic anhydride, respectively. These cyclisations occur probably via the intermediate N-carbamoyl-pyridinium cation , the rate of cyclisation seems to depend on the concentration of the intermediate in the form of the dipolar ion , i.e. the ionised carboxyl is necessary for the reaction. In γ-collidine the cyclisation occurs very slowly; this is attributed to the slowness due to steric hindrance of the production of N-carbamoyl-γ-collidinium cation and its instability. The azasuccinic anhydrides mentioned polycondense, yielding the corresponding polyglycine, poly-DL -alanine and poly-DL -leucine. This reaction too is catalysed by pyridine; it can also be effected by γ-collidine, but the efficacity of the latter in comparison with pyridine is even less than in the catalysis of the cyclisation described above. N-(p-nitrophenoxy-carbonyl)-glycine reacts with lysozyme in the presence of pyridine; several glycine residues are introduced into the enzyme molecule, the product being insoluble and poorly active.     

Determination of iron at ng/ml level by solid phase spectrophotometry after preconcentration on cation exchange filters

A cationic exchanger paper is used to retain analytes in solution and, after drying, to analyze directly by measuring the UV-Vis absorbance of the paper. The method was applied to determination of iron using its known 1,10-phenanthroline complex. Using 100 ml of sample the applicable concentration range was between 1.0 and 10.0 ng/ml with a detection limit of 0.2 ng/ml and a RSD around 2%. The method was applied to determination of iron total in snow, human serum and wine.     

The compensation effect revisited

It is generally accepted that the compensation effect arises when a linear relation between InA andE is detected for a simple reaction taking place over different catalysts or for different reactions over one catalyst. For a perfect linear relation between InA andE representation of the reaction rate constant in an Arrhenius plot results in a series of straight lines which intersect in a single point. The importance is stressed of defining unambiguously what is meant by the compensation effect, and it is shown how the scatter in the values of InA is translated into Arrhenius plots.     

Cyclohexane conversion on nickel mordenite

Two series of nickel mordenite catalysts have been prepared on the basis of Na-mordenite and H-mordenite. Their catalytic activity in cyclohexane conversion has been studied. It has been found that the properties of the catalysts are strongly dependent on the acidity of mordenite.

---

NaM HM. .

     

Microemulsion photopolymerization of methacrylates stabilized with sodium dodecyl sulfate and poly(N-acetylethylenimine) macromonomers

Methyl methacrylate and butyl methacrylate were polymerized in oil-in-water microemulsions that were stabilized by sodium dodecyl sulphate (SDS). A poly(N-acetylethylenimine) (PNAEI) macromer was also included in the recipe, as a cosurfactant and a comonomer. Polymerizations were initiated by UV-irradiation. The average diameters of latex particles, obtained by STM, were in the range of 17-200 nm. The experimental data evidenced that the particle size was mainly dependent on the SDS/PNAEI ratio. Polymerization yields were around 75-85%. The synthesized copolymers have viscosity average molecular weights in the range of 2.1-2.4×10⁶ and glass transition temperatures of 38.0-43.5°C, lower than those obtained without using PNAEI. The investigation by means of FTIR and 1H-NMR techniques revealed that PNAEI was incorporated into the nanoparticles.     

A "traceless" Staudinger ligation for the chemoselective synthesis of amide bonds

[reaction: see text] Here we report a novel modification of our previously reported "Staudinger ligation" that generates an amide bond from an azide and a specifically functionalized phosphine. This method for the selective formation of an amide bond, which does not require the orthogonal protection of distal functional groups, should find general utility in synthetic and biological chemistry.