Thermodynamic mixing properties of liquids in the system Na2O-SiO2

Enthalpies of fusion have been measured by differential scanning calorimetry for a Na₂O-SiO₂ system at 50, 66.6, and 74.4 mol% SiO₂. Enthalpies of mixing of liquids obtained from different calorimetry techniques are critically evaluated. The data on calorimetric enthalpy, activity of Na₂O, cristobalite liquidus, and immiscibility gap are used to determine the enthalpy and entropy of mixing of sodium-silicate liquids are determined as a function of composition by the least squares method. The derived mixing properties are based only on the experimental data and are independent of any assumption about the structure and chemical species in liquids. The enthalpy of mixing has a minimum value of −120 kJ/mol at 35-40 mol% SiO₂ and is convex upward around 80-90 mol% SiO₂. The entropy of mixing have a maximum value of + 6 J/K-mol at 75 mol% SiO₂, and it decreases with the SiO₂ content to −5 J/K-mol at 40 mol% SiO₂. This decrease in entropy can be accounted for by ideal mixing of Q⁴, Q³, and Q^{0 + 1 + 2} (= Q⁰ + Q¹ + Q²) species in the liquids and is responsible for the negative temperature dependence of the partial molar Gibbs energy of mixing of Na₂O, observed in activity measurements. Comparison of the present results with previous values suggests that a quasi-chemical model and the Adam-Gibbs model overestimate the configurational entropy of mixing of liquids.     

A new method for the synthesis of dinaphtho[1,2‐b;2′,1′‐d]thiophenes and selenophenes

Naphthalene‐1‐sulfonic acid dimethylamides were treated with n‐BuLi and elemental sulfur or selenium to afford dinaphtho[1,2‐b:2′,1′‐d]thiophenes and selenophenes, respectively. This is the first example of making two C S/Se bonds and a C C bond in a single step at room temperature and also demonstrates a useful method for the synthesis of both thiophenes and selenophenes on naphthalene. In the case of the reactions of elemental selenium, diselenides were also obtained along with dinaphtho[1,2‐b:2′,1′‐d]selenophenes. The structure of dinaphtho[1,2‐b:′,1′‐d]thiophene was characterized by X‐ray crystallography as a representative molecule. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:239–248, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20291     

Application of MCD spectroscopy and TD-DFT to nonplanar core-modified tetrabenzoporphyrins: effect of reduced symmetry on nonplanar porphyrinoids

The optical spectra of a series of core-modified tetrabenzoporphyrins were analyzed to determine the effects of core modification, ligand folding, and partial benzo substitution at the ligand periphery on the electronic structure by using magnetic circular dichroism (MCD) and NMR spectroscopy, X-ray crystallography, cyclic and differential pulse voltammetry, and TD-DFT calculations. Planar 21-carba-, 21-thia-, 21,23-dithia-, and 21-oxa-23-thiatetrabenzo[b,g,l,q]porphyrins reported previously were studied together with the previously unreported 21-oxa- and 21-carba-23-thiatetrabenzo[b,g,l,q]porphyrins. The optical properties of these compounds are compared to those of tetrabenzo[b,g,l,q]-, 5,10,15,20-tetraphenyl-, 5,10,15,20-tetraphenyltetrabenzo[b,g,l,q]-21-thia-, 5,10,15,20-tetraphenyltetrabenzodithia-, 5,10,15,20-tetraphenyldibenzo[g,q]-21,23-dithia-, 5,10,15,20-tetraphenyldibenzo[b,l]-21,23-dithia-, 5,10,15,20-tetraphenyltribenzo[g,q,l]-21-thia-, and 5,10,15,20-tetraphenylbenzo[b]-21-thiaporphyrins. Michl's perimeter model and Gouterman's four-orbital model are used to conceptualize the results and to account for red shifts commonly observed in the spectral bands of nonplanar porphyrinoids.     

Observation and evaluation of proton diffusion in porous media by the pH-imaging microscope using a flat semiconductor pH sensor.

The diffusion of protons in porous media was observed and evaluated using a pH-imaging microscope with a flat semiconductor. Small particles were packed on the sensing surface of the flat sensor, followed by the addition of a lactic acid droplet on the top of the packed particle layer. The pH distribution accompanied by the diffusion of lactic acid was visualized at the bottom of the layer using the flat sensor. The difference in the diffusion property was confirmed depending on the particle type. The effective diffusion coefficients of the lactic acid in some porous media were estimated by combining the experimental results and mathematical calculation.     

Characteristic responses of a semiconductor gas sensor depending on the frequency of a periodic temperature change

A novel gas-sensing system based on a dynamic nonlinear response is reported to enhance the selectivity toward sample gases using a single detector. A periodic temperature change was applied to a semiconductor gas sensor and the resulting conductance of the sensor was evaluated by fast Fourier transformation (FFT). The dynamic nonlinear response to the sample gases was further characterized depending on the frequency of the temperature change. The characteristic sensor response under the application of a temperature change was theoretically simulated by considering the kinetics of gas molecules on the semiconductor surface.     

Control of the bioluminescence starting time by inoculated cell density.

In this study, we attempted to control the timing of light-emission from bioluminescent bacteria, by changed cell numbers inoculated into medium. Luminous bacteria express bioluminescence when the number of cells reached a threshold. Inoculated cell density had an effect on the time of bioluminescence starting. Samples were prepared by varying cell density of inoculation. In the results, all the vials showed different luminescence profiles in the order of inoculated cell population.     

Preconcentration and determination of cadmium by GFAAS after solid-phase extraction with synthetic zeolite.

The solid-phase extraction (SPE) method for the preconcentration of trace amounts of cadmium using synthetic zeolite A-4 and its determination by graphite furnace atomic absorption spectrometry (GFAAS) was investigated. The preconcentration conditions, such as the optimum pH range of the sample solution for the adsorption of cadmium and the kind of acid solution for dissolving the cadmium-adsorbed synthetic zeolite A-4, as well as the measurement conditions for the determination of cadmium by GFAAS, e.g., the ashing and atomizing temperature, were investigated. Quantitative recovery of cadmium onto zeolite A-4 from the sample solution over the pH range 2.0 - 9.0 was achieved by the batch method. After the solid-phase (cadmium-adsorbed zeolite A-4) was separated from the sample solution by a membrane filter, it was dissolved in 2.0 cm(3) of 2.0 mol dm(-3) nitric acid. An aliquot of the resulting solution was injected into the graphite furnace. In GFAAS measurements an alternate gas (Ar, 90%; O(2), 10%) was used as a sheath gas, and the ashing temperature and atomizing temperature were 400 degrees C and 1600 degrees C, respectively. The detection limit (3 sigma) for cadmium was 0.002 microg dm(-3). The relative standard deviation at 0.010 microg dm(-3) was 3.5 - 4.5% (n = 5). The proposed method has been successfully applied to the analysis of trace cadmium in environmental water samples.     

Long-wavelength luminescence from GaSb quantum dots grown on GaAs substrates

Self-assembled GaSb quantum dots (QDs) with a photoluminescence wavelength longer than 1.3 μm were successfully grown by suppressing the replacement of As and Sb on the surface of the GaSb QDs. This result means that GaSb can thus join InAs or GaInAs as a suitable material for QD lasers for optical communications.