5,10-二(对-氨基)四苯基卟啉和吖啶黄之间激发能量的传递

利用Forster能量传递机制,研究了氯仿溶液中吖啶黄向5、10-二(对-氨基)四苯基卟啉(简称TBP)的激发能量传递和TBP.浓度变化时对能量传递速度常数的影响.实验结果表明,吖啶黄和TBP之间具备能量共振传递的条件,并且计算了能量共振传递的临界距离为0.42nm、传递效率为0.72和传递速度常数为1.42×107s-1.这些数据对复合膜光电转换器件的设计将具有重要意义.     

全同超形变带转动惯量的粒子数守恒计算

利用推转壳模型的粒子数守恒方法计算了超形变(SD)转动带¹⁹²Hg和¹⁹⁴Hg(1,2,3)的带首转动惯量.分析了带首附近的组态结构及带首转动惯量随对力强度的变化.带首转动惯量之差δJ₀对对力强度十分敏感,而对Nilsson能级参数K、μ及形变参数并不敏感.对力及堵塞效应是造成带首转动惯量差别的主要因素.但与正常形变核相比,对力强度似有较大程度减弱.     

利用模拟退火算法进行油井流入动态研究

油井流入动态是油井举升优化设计的基础 ,目前国内外研究油井流入动态的方法有多种 ,但是各有其不足和局限性 .为此利用模拟退火方法进行油井流入动态方法研究 .与以往的近似算法相比 ,该方法不需要将单相流和多相流分开讨论 ,且无任何假设条件 ,适用范围广 ;通过实例 ,把模拟退火的预测的产量结果与利用 Vogel方程所预测的产量结果进行比较和误差分析 ,结果表明 ,该算法的误差是非常小的 .因此 ,利用该算法研究油井流入动态非常可行 .     

动态特性的参数设计在差示光度法测金中的应用

本文提出对动态特性参数设计使用相关系数与信噪比作为内表指标进行分析 ,并使用该分析方法优化了差示光度法测较高浓度金矿样的试验条件。     

A sagittally focusing double‐multilayer monochromator for ultrafast X‐ray imaging applications

The development of a sagittally focusing double‐multilayer monochromator is reported, which produces a spatially extended wide‐bandpass X‐ray beam from an intense synchrotron bending‐magnet source at the Advanced Photon Source, for ultrafast X‐ray radiography and tomography applications. This monochromator consists of two W/B₄C multilayers with a 25 Å period coated on Si single‐crystal substrates. The second multilayer is mounted on a sagittally focusing bender, which can dynamically change the bending radius of the multilayer in order to condense and focus the beam to various points along the beamline. With this new apparatus, it becomes possible to adjust the X‐ray beam size to best match the area detector size and the object size to facilitate more efficient data collection using ultrafast X‐ray radiography and tomography.     

Design of interdigital transducers for crack detection in plates

Interdigital transducers (IDT) for non-destructive evaluation (NDE) of cracks in plates are designed based on an analytical model established previously. Key considerations include mode selectivity, excitation strength, collimation of wave and cost. The advantage of mode selectivity of IDT over PZT patch is presented both analytically and experimentally. Effects of parameters, namely finger spacing, width, length, number of fingers, and the size of IDT, on the excitation strength and mode selectivity are considered. This led to the design of a mobile double-sided IDT as an efficient device where excitation strength is strong and focused. The device was fabricated in-house using commercially available piezoelectric ceramics and used to develop a procedure for accurate identification of the direction and extent of cracks in plates. Three aluminum plates, one with a linear deep crack, another with a piecewise linear shallower crack and the third with a curved crack, were used to illustrate the accuracy and efficiency of both the proposed device and procedure for effective NDE.     

Theoretical analysis and experimental verification of a cost-effective chromatic dispersion monitoring method in a 40-Gb/s optical fiber communication system

A cost-effective technique for in-service chromatic dispersion monitoring in a 40-Gb/s optical communication system is proposed. Microwave devices are adopted to detect the electrical power of a specific frequency band. A simplified theoretical model is proposed and discussed focusing on the relationship between electrical power and chromatic dispersion at different frequency bands. The dynamic monitoring of chromatic dispersion is achieved using devices such as PIN detector, microwave amplifier, narrow-band microwave filter, and electrical power detector. The maximum detectable chromatic dispersion is 130 ps/nm and a resolution of 5.2 ps/nm/dB has been achieved in the frequency band centered at 12 GHz.     

基于新型电荷生成层的P-i-N结构白色有机叠层电致发光器件

采用2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline(BCP): 5 wt.% cesium carbonate(Cs₂CO₃)和N, N'-Bis(naphthalen-1-yl)-N,N'-bis(phenyl)-benzidine(NPB): 20 wt.% molybdenum oxide(MoO₃)分别作为器件的电子注入层和空穴注入层,研究了N型和P-i-N结构有机电致发光器件的载流子传输特性.载流子传输层中BCP: Cs₂CO₃和NPB:MoO₃的引入有效增强了载流子注入能力,从而降低了器件的驱动电压.基于新型电荷生成层BCP: 5 wt.% Cs₂CO₃/ NPB: 20 wt.% MoO₃制备了色稳定、高效率P-i-N结构有机叠层器件.与单元器件相比,引入新电荷生成层有机叠层器件的最大电流效率增大了2.5倍,表明该电荷生成层可以有效地将电子和空穴分别注入到相邻发光单元中.采用该电荷生成层制备了P-i-N结构白色有机叠层器件,器件的上下发光单元分别为橙光和蓝光发射.当发光亮度从500增加到5 000 cd/m²时,器件的色坐标稳定在(0.33, 0.29)附近,接近白光等能点.利用单色发光单元堆叠制备白色有机叠层器件的方法为实现色稳定、高效率的白色有机电致发光器件提供了一种有效的途径.