Molecular weight and polydispersity estimation of adsorbing polymer brushes by atomic force microscopy

We have estimated the molecular weight, Mn, and polydispersity, PDI, of densely grafted poly(N-isopropylacrylamide) (PNIPAM) brushes using a novel atomic force microscopy (AFM) approach. When compression of a polymer brush induced adsorption of multiple chains to an AFM tip, the resulting decompression force profile exhibited a maximum attractive force at a separation, Lm, that decayed to zero with increasing tip-sample separation. We have found that the separation Lm approximates the average contour length, Lc, determined by gel permeation chromatography (GPC). The detection of a decaying attractive force at separations larger than Lc suggests that chains of above average length sequentially break free from the tip as they are stretched away from the grafting surface. The shape of the decompression profile in this region approximately paralleled the cumulative weight fraction of the grafted chains determined by GPC. The fraction of chains of a given molecular weight determined from a single force curve fit a log-normal distribution, having a standard deviation that provided an estimate of the PDI. We have characterized two PNIPAM brushes by this AFM technique as well as by GPC coupled to a multiangle laser light-scattering detector (MALLS). The values obtained by AFM-(1) Mn,AFM = (3.8+/-0.5) x 10(4), PDI,(AFM) = 1.3+/-0.1 and (2) Mn,AFM = (9.4+/-1.4) x 10(4), PDI,(AFM) = 1.3+/-0.1-agreed quite well with the corresponding GPC/MALLS values of (1) Mn,GPC = 4.77 x 10(4), PDI,GPC = 1.33 and (2) Mn,GPC = 9.49 x 10(4), PDI = 1.35. This technique requires only a single force curve to obtain a statistical distribution of contour lengths and provides a novel method for estimating the Mn and PDI of appropriate uniformly grafted dense polymer layers.     

Enantioselective synthesis of alpha-methyl-D-cysteine and lanthionine building blocks via alpha-methyl-D-serine-beta-lactone

[reaction: see text] We report here the enantioselective synthesis of Boc-alpha-methyl-d-cysteine(PMB)-OH and lanthionine building blocks through the regioselective ring opening of key intermediate Boc-alpha-methyl-d-serine-beta-lactone.     

Selection of the cis and trans phosph(III)azane macrocycles [{P(mu-NtBu)}2(1-Y-2-NH-C6H4)]2(Y=O, S)

The 1 : 1 reactions of [ClP(mu-NtBu)]2 with the difunctional aromatic amines 1,2-1-YH-2-NH2-C6H4 in the presence of Et3N give the dimeric phosph(III)azane macrocycles [{P(mu-NtBu)2(1-Y-2-HN-C6H4)]2, predominantly as the cis isomer in the case of Y=O (1.cis) and as the trans isomer for Y=S (2.trans). Model M.O. calculations suggest that the selection of the cis and trans isomers is not thermodynamically controlled. The alternative isomers 1.trans and 2.cis are generated exclusively by the deprotonation of the model intermediates [(1-Y-2-NH2-C6H4)P(mu-NtBu)]2[Y=O (3), S (4)] with nBuLi followed by cyclisation with [ClP(mu-NtBu)]2. The solid-state structures of 1.cis/trans(50 : 50), 2.cis, 3 and 4 are reported.     

Evaluation of an atomic force microscopy pull-off method for measuring molecular weight and polydispersity of polymer brushes: effect of grafting density

The accuracy of the molecular weights Mn and polydispersities of polymer brushes, determined by stretching the grafted chains using atomic force microscopy (AFM) and measuring the contour length distribution, was evaluated as a function of grafting density sigma. Poly(N,N-dimethylacrylamide) brushes were prepared by surface initiated atom transfer radical polymerization on latex particles with sigma ranging between 0.17 and 0.0059 chains/nm2 and constant Mn. The polymer, which could be cleaved from the grafting surface by hydrolysis and characterized by gel permeation chromatography (GPC), had a Mn of 30,600 and polydispersity (PDI) of 1.35. The Mn determined by the AFM technique for the higher density brushes agreed quite well with the GPC results but was significantly underestimated for the lower sigma. At high grafting density in good solvent, the extended structure of the brush increases the probability of forming segment-tip contacts located at the chain end. When the distance between chains approached twice the radius of gyration of the polymer, the transition from brush to mushroom structure presumably enabled the formation of a larger number of segment-tip contacts having separations smaller than the contour length, which explains the discrepancy between the two methods at low sigma. The PDI was typically higher than that obtained by GPC, suggesting that sampling of chains with above average contour length occurs at a frequency that is greater than their spatial distribution.     

3-Azido-1,2,4-triazine N-Oxides. Syntheses and structure elucidation

Several 3-azido-1,2,4-triazine 1-oxides were prepared by treating the appropriate 3-hy-drazino derivatives with nitrous acid. 3-Azido-1,2,4-triazine 2-oxide was prepared by reaching the corresponding 3-bromo derivative with either tetramethylguanidinium azide in chloroform or sodium azide in aqueous acetone. The azido derivatives which could cyclize to form the tetra-zolo isomers were proven to exist enitrely in the open chain form by a ¹³C nmr, ¹H nmr and infrared spectroscopic study.     

Identification of defect sites on oxide surfaces by metastable impact electron spectroscopy

In this review, thin films of SiO₂ on Mo(1 1 2) and MgO(1 0 0) on Mo(1 0 0) have been characterized using metastable impact electron and ultraviolet photoelectron spectroscopies (metastable impact electron spectroscopy (MIES) and ultraviolet photoelectron spectroscopy). The electronic and chemical properties of the thin films are identical to those of the corresponding bulk oxides. For different prepared defective SiO₂ surfaces, additional features are observed in the band-gap region. These features arise from vacancies or excess oxygen and are consistent with theoretical predictions of additional occupied states in the band-gap due to point defects. Extended defect sites on SiO₂ and MgO are identified using MIES by a narrowing of the O(2p) features with a reduction in the density of extended defect sites. MIES of adsorbed Xe (MAX) is also used to estimate the density of extended defect sites. Furthermore, it is shown that CO is an appropriate probe molecule for estimating the defect density of MgO surfaces. Upon Ag exposure, the change in the work function of a low defect MgO(1 0 0) versus a high defect surface is markedly different. For a sputter-damaged MgO(1 0 0) surface, an initial decrease of the work function was found, implying that small Ag clusters on this surface are electron deficient. In contrast, for SiO₂ no significant change of the work function upon Ag exposure with increasing defect density was observed. On MgO(1 0 0), the presence of defect sites markedly alter the electronic and chemical properties of supported Ag clusters. Such a strong influence of defect sites was not found for Ag clusters on SiO₂.     

Ab initio simulation of benzene Raman intensities

C₆H₆ Raman scattering activities calculated from harmonic model ab initio Hartree–Fock 6–311 ++ G(d, p) polarizability derivatives (and harmonic force fields calculated at the same level) accurately simulate experiment (to within 1% for the a_1g modes). Accurate predictions are also made for the e_2g modes (to within 5% for ν₇ and ν₉, and more poorly for ν₆ and ν₈ [in Fermi resonance with ν₆ + ν₁]) and for the e_1g out-of-plane mode, ν₁₀. Only the ν₆ in-plane CCC bending mode scattering activity is found to be anomalous. Systematic variation of the basis set indicates that the benzene scattering activities and depolarization ratios are strongly dependent on inclusion of both carbon and hydrogen atom diffuse functions in the basis set. Predictions are also made for ¹²C₆D₆ and for unmeasured intensities in ¹³C₆H₆. Measurements of a_1g mode scattering activities in the latter molecule are predicted to be useful in testing the harmonic Hartree–Fock Raman intensity model.