一类非线性单调型方程的区域分裂法

本文考虑了一类非线性单调问题的加性Schwgrz交替法和异步平行算法,并得到了在能量模意义下的收敛性结果,最后还讨论了格式的有限元离散。     

Developing a hybrid emulsion polymerization system to synthesize Fe3O4/polystyrene latexes with narrow size distribution and high magnetite content

A hybrid emulsion polymerization was formulated for synthesizing Fe₃O₄/polystyrene composite latex. This system, containing binary droplets that are magnetic (Mag)‐droplets with a diameter of 100–200 nm and styrene (St)‐droplets with a diameter of 3–4 μm, was obtained by mixing Mag‐miniemulsion and St‐macroemulsion. With extremely low surfactants concentration (?critical micelle concentration, CMC), the nucleated loci are selectively controlled in the Mag‐droplets, as the result of smaller droplet size and larger surface ratio. Both water‐soluble potassium persulfate (KPS) and oil‐soluble 2,2′‐azobis(2‐isobutyronitrile) was adopted to initiate the polymerization. In the presence of KPS, magnetic polystyrene latices with particles size of 60–200 nm, narrow size distribution, and high magnetite content (86 wt % measured by TGA) were attained successfully. The synthesized magnetic Fe₃O_4/polystyrene latices assembled into well‐ordered hexagonal structure in the surface of a carbon supported copper grid. The influence of various parameters on various aspects of the as‐synthesized Fe₃O₄/polystyrene was investigated in detail: type of initiator on composite morphology, feed ratio of Mag‐miniemulsion and St‐macroemulsion on magnetite content, and hydrophobic agent or amount of surfactant on size and size distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5285–5295, 2007     

改善液晶光阀投影光学系统偏振特性的理论设计方法

定量分析了液晶光阀投影光学系统中影响系统对比度的主要因素，利用矢量方法建立三维空间数学模型对光线进行追迹，并利用琼斯矩阵和矢量光学的原理分析了偏振器件--主要是波片--和各种光学薄膜对光学系统性能的影响。给出了在一定假设条件下的对没有波片的光学系统和插入波征后的光学系统的仿真计算结果。两组数据比较表明在光路中插入合适相位差的波片可以显著提高系统对比度等性能。     

利用模式的对称性研究光子晶体光纤的色散

由光子晶体光纤的对称性可以得到模式分布的对称性，根据模式的对称性选择适当的展开函数，可以使计算量大大减少。计算了六角结构光子晶体光纤的色散特性，得到了波长在1．55pm处色散为零时，光子晶体光纤的结构参量所满足的方程。     

Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.     

生物小分子与铜锌超氧化物歧化酶相互作用的波谱学研究及其应用

本工作以ESR和NMR为主要手段,并结合其它生化方法,考察了氨基酸、核酸碱基、糖等生命基本物质,和抗坏血酸等生命必需物质与钢锌超氧化物歧化酶的相互作用,实验观测到氨基酸、核酸碱基和抗坏血酸在水溶液中可以与酶中的Cu²⁺作用而使其脱离活性部位,以小分子络合物形式游离在溶液中,同时使酶失活,脱离活性部位的Cu²⁺的比例和酶的失活程度取决于小分子配体的加入量及其与Cu²⁺的络合能力。此外,首次尝试使用ESR方法,并借助氨基酸与酶的作用,考察了铜锌超氧化物歧化酶在盐酸胍变性和热变性过程中的构象变化行为,结果表明这一方法是直观而有效的。     

金属羰基化合物（CpFe（CO）2）2与金属氧化物表面作用的傅里叶变…

用漫反射红外光谱和光声红外光谱研究了金属羰基化合物（ＣｐＦｅ（ＣＯ）２）２Ｃｐ＝η＾５－Ｃ５Ｈ５与酸性，中性和碱性Ａｌ２Ｏ３及ＴｉＯ２的相互作用，结果表明，在Ａｌ２Ｏ３表面生成的洗生物种类及浓度与Ａｌ２Ｏ３的酸碱度明显相关，在酸性Ａｌ２Ｏ３表面，主要存在衍生物（ＣｐＦｅ（ＣＯ）２Ｆｅ－Ｈ－Ｆｅ（ＣＯ２Ｃｐ）＾＋及少量的ＣｐＦｅ（ＣＯ）２（－Ｏ－）；在中性Ａｌ２Ｏ３表面存在的ＣｐＦｅ（ＣＯ）２（－Ｏ     

用激活性非线性介质Nd：MgO：LiNbO3产生二次谐波

以Nd:MgO:LiNbO_3同时兼作激活介质和非线性光学材料,研究自倍频激光器。用小型氙灯泵浦,在室温下获得二次谐波激光(0.547μm) 阈值小于4.8'J,最大输出400μJ/shot,工作温度范围大于20℃～45℃,无光损伤。     

叶绿素A较高激发态的发光

采用激发样品表层和样品中心两种激发方式,在300K和77K温度下研究叶绿素A(Chla)的较高激发行为,观测到峰值位于493、520和580nm三条新的荧光发射带.分别测量它们的荧光激发光谱,证明这三条新的荧光带属于Chla的第二激发单线态向基态的不同振动能级的辐射跃迁发光.最后提出电子跃迁模型,同时进行了讨论.