Determination of acetolactate synthase activity and protein content of oilseed rape (Brassica napus L.) leaves using visible/near-infrared spectroscopy

A new acetolactate synthase (ALS)-inhibiting herbicide, propyl 4-(2-(4,6-dimethoxypyrimidin-2-yloxy)benzylamino)benzoate (ZJ0273), was applied to oilseed rape (Brassica napus L.) leaves in different leaf positions. Visible/near-infrared (Vis/NIR) spectroscopy was investigated for fast and non-destructive determination of ALS activity and protein content in rapeseed leaves. Partial least squares (PLS) analysis was the calibration method with comparison of different spectral preprocessing by Savitzky-Golay (SG) smoothing, standard normal variate (SNV), first and second derivative. The best PLS models were obtained by first-derivative spectra for ALS, whereas original spectra for soluble, non-soluble and total protein contents. Simultaneously, certain latent variables (LVs) were used as the inputs of back-propagation neural network (BPNN) and least squares-support vector machine (LS-SVM) models. All LS-SVM models outperformed PLS models and BPNN models. The correlation coefficient (r), root mean square error of prediction (RMSEP) and bias in validation set by LS-SVM were 0.998, 0.715 and 0.079 for ALS, 0.999, 33.084 and 1.178 for soluble protein, 0.997, 42.773 and 6.244 for non-soluble protein, 0.999, 59.562 and 7.437 for total protein, respectively. The results indicated that Vis/NIR spectroscopy combined with LS-SVM could be successfully applied for the determination of ALS activity and protein content of rapeseed leaves. The results would be helpful for further on field analysis of using Vis/NIR spectroscopy to monitor the growing status and physiological properties of oilseed rape.     

Cloning, Expression and Purification of Wheat Acetyl-CoA Carboxylases CT Domain in E. coil

The entire gene of carboxyltransferase（CT） domain of acetyl-CoA carboxylase（ACCase） from Chinese Spring wheat（CSW） plastid was cloned firstly, and the 2.3 kb gene was inserted into PET28a^＋ vector and expressed in E. coil in a soluble state. The （His）6 fusion protein was identified by SDS-PAGE and Western blot. The recombinant protein was purified by affinity chromatography, and the calculated molecular mass（Mr） was 88000. The results of the sequence analysis indicate that the cloned gene（GeneBank accession No. EU124675） was a supplement and revision of the reported ACCase CT partial cDNA from Chinese Spring wheat plastid. The recombinant protein will be significant for us to investigate the recognizing mechanism between ACCase and herbicides, and further to screen new herbicides.     

水泥聚苯模壳格构式混凝土墙体的抗侧性能试验及分析

论文介绍6片不同高宽比的水泥聚苯模壳格构式混凝土墙体在轴压力和水平往复侧推力作用下的试验,分析这种墙体的抗侧强度、刚度和延性等力学性能.试验表明,高宽比大于1的墙体破坏时表现为墙体跟部的单一水平裂缝,其他部位完好;高宽比3∶4的墙体破坏时存在多条通过格构梁柱的斜向裂缝,墙体裂缝分布密集,变形能力好.     

聚吡咯/氧化钒@硫正极材料制备及其在锂硫电池中的应用

采用聚吡咯/中空氧化钒@硫(PPy/H-V2O5@S)作为锂硫电池正极,其中间层极性V2O5中空球壳为硫的体积膨胀提供足够的空间并通过化学键固定多硫化物,外层聚吡咯对多硫化物的扩散起双重固定作用,并作为导电骨架提高正极导电性,共同提高正极对硫化物的固定作用,提高电池循环稳定性.PPy/H-V2 O5@S正极在0.5C、1C、2C、4C电流密度300次循环后,放电容量分别保持在825.6 mA·h·g-1、673.6 mA·h·g-1、625.1mA·h·g-1、583.3 mA·h·g-1,库伦效率保持在98;以上,展现出极好的循环稳定性.     

主动控制压电旋转悬臂梁的参数振动稳定性分析

在工程实际中旋转机械由于制造和加工误差,装配的不均匀性等原因,往往会脉动运行,这将使得机械系统发生参数振动. 当脉动参数满足一定关系时,这种参数振动将会失稳,进而影响机械结构的正常运转. 本文针对这一问题,引入压电材料对 脉动旋转悬臂梁系统的振动进行控制,研究主动控制悬臂梁系统的参数振动优化设计问题,采用 Hamilton 变分原理与一阶 Galerkin 离散相结合的方法,建立了受速度反馈传感器主动控制的压电旋转悬臂梁的一阶近似线性控制方程. 运用多尺度方法,得到了压电旋转悬臂梁系统在发生1/2亚谐波参数共振时稳定性边界的控制方程,并利用直接分析方法验证了解析摄动解的正确性. 将摄动解中临界阻尼比和轮毂角速度脉动幅值的无量纲参数作为评价系统稳定性能的指标. 通过数值算例,分析了轮毂半径、轮毂角速度平均值和脉动幅值、梁长以及速度传感器的反馈增益系数对系统稳定性区域的影响. 研究结果表明,梁长、轮毂半径、脉动幅值会降低系统稳定性,反馈增益系数可以提高系统稳定性,而轮毂角速度平均值与系统稳定性之间有非单调的关系. 为进一步设计压电旋转机械结构提供了理论依据.      

基于PVDF薄膜传感器的猪肝动态压缩力学性能测试

瞬态冲击载荷作用下肝脏的力学响应是损伤生物力学的重要研究内容.本文提出了一种可用于软组织动态压缩力学特性测试的改进SHPB(分离式霍普金森压杆,Split Hopkinson Pressure Bar)方法.该方法采用PVDF(聚偏氟乙烯,Polyvinylidene Fluor)压电薄膜传感器测量实验过程中试件两端面...     

离子色谱荧光检测法测定废水中痕量2-氨基联苯和4-氨基联苯

采用离子色谱荧光检测法测定废水中的2－氨基联苯（2－ADP）和4－氨基联苯（4－ADP）,流动相为1．0mL/min的0．06mol/L NaCl,0.08mol/L HCl,40%(V/V)ACN,分离柱为Dinoex OmniPac PCX-500,该法具有良好的重现性和线性关系,2－ADP和4－ADP的回收率分别为98．5％－101．4％和102．2％－104．0％,检测限分别为0．006mg/L和0．10mg/L。     

Silica-metalloporphyrins hybrid materials: preparation and catalysis to hydroxylate cyclohexane with molecular oxygen

Three types of novel silica-metalloporphyrins hybrid materials, Si-S-APTCPPFe, Si-S-APTCPPMn and Si-S-APTCPPCo, were prepared at room temperature by sol–gel method involving a thiol-ene polymerization reaction of 5-(4-allyloxy)phenyl-10,15,20-tri(4-chlorophenyl)porphyrin (APTCPP) with 3-mercaptopropyltrimethoxysilane (MPS). The hybrid materials were characterized by XRD, SEM, FT–IR, UV–Vis and TG, and were investigated as catalysts for the aerobic oxidation of cyclohexane. It is found that these hybrid materials are more efficient catalysts than the analogous non-supported metalloporphyrins for cyclohexane hydroxylation in metalloporphyrin–O₂–ascrobate system and the metal ion in the porphyrins significantly affected the catalytic efficiencies of these hybrid materials.     

关于陀螺信号处理中小波基选取的研究

在建立陀螺漂移的数学模型的基础上，使用不同的小波基对陀螺输出信号进行多尺度小波分解，去除由噪声产生的小波系数，从而达到消除噪声的目的。从不同小波基的滤波效果来看，双正交样条小波Biorl.5具有较好的去噪效果，从而也验证了小波对称性在陀螺信号去噪中的重要性。     

氧化锆增韧莫来石复相陶瓷的摩擦磨损行为与磨损机制

研究了氧化锆增韧莫来石得相陶瓷（ＺＴＭ）与氧化铝陶瓷摩擦副在室温至４００℃干摩擦下的摩擦磨损行为与机制。研究表明：ＺＴＭ陶瓷的磨损率随温度的升高而逐渐降低;室温下ＺＴＭ陶瓷的磨损机制以微观切削和微观断裂为主;随着温度的升高,ＺＴＭ陶瓷中的玻璃相具有微观润滑作用,其磨损机制转变为微观断裂和晶粒剥落为主;偶件氧化铝的磨损机制主要是脆性断裂及晶粒剥落。