A single trapped ion in a finite range trap

This paper presents a method to describe dynamics of an ion confined in a realistic finite range trap. We model this realistic potential with a solvable one and we obtain dynamical variables (raising and lowering operators) of this potential. We consider coherent interaction of this confined ion in a finite range trap and we show that its center-of-mass motion steady state is a special kind of nonlinear coherent states. Physical properties of this state and their dependence on the finite range of potential are studied.     

Tractor cabin’s passive suspension parameters optimization via experimental and numerical methods

Reduction of transmitted vibrations of tractor cabin which is caused by road roughness is the major objective of this study; consequently operator health can be achieved. This objective is carried out via experimental measurements and finite element modeling. For this purpose the vertical acceleration of the cabin as well as the rear axle of the tractor is measured in different road conditions and forward speeds. However, it should be mentioned that tests were carried out according to the ISO 2631-1985 but no measurements were done on the driver’s seat. Then the finite element model of the cabin’s tractor is developed and the dynamic response of the cabin interior (with the measured axle acceleration as input dynamic force) is obtained. At the third step the suspension parameters are calculated by comparing the accelerations obtained from the model and measurements. Finally the suspension parameters are optimized according to ISO 2631-1985 via iterative method.     

Novel unbreakable solid-phase microextraction fiber by electrodeposition of silica sol-gel on gold

A new technique for preparation of an unbreakable solid-phase microextraction (SPME) fiber, using sol-gel technology is developed. Primarily, an ultrathin two-dimensional intermediate film was prepared by hydrolysis of 3-(trimethoxysilyl)-1-propanthiol self-assembled monolayer grafted onto gold, then a stationary phase by electrodeposition of 3-(trimethoxysilyl)propylmethacrylate as a precursor, tetramethyl orthosilicate and polyethylene glycol as a coating polymer was produced. The scanning electron microscopy images revealed that the new fiber exhibits a rather porous and homogenous surface. The thermal stability of the fabricated fiber was investigated by thermogravimetric analysis. The applicability of the prepared fiber coating in conjunction with gas chromatography-mass spectrometry was examined by SPME of polycyclic aromatic hydrocarbons, as model analytes, from aquatic media. An extraction time of 20 min at 50 °C gave maximum peak areas when NaCl, 15% was added to the aqueous samples. Limits of detection were in the range of 0.01-0.02 ng/mL and relative standard deviation values were in the range of 4-16% at 1 ng/mL. The developed method was successfully applied for the analysis of real water samples while the relative recovery percentage was in the range of 102-118%.     

Electrospun composite of polypyrrole-polyamide as a micro-solid phase extraction sorbent

A micro-solid phase extraction technique was developed using a novel polypyrrole-polyamide nanofiber sheet, fabricated by electrospinning method. The applicability of the new nanofiber sheet was examined as an extracting medium to isolate malathion as a model pesticide from aqueous samples. Solvent desorption was subsequently performed in a microvial, and an aliquot of extractant was injected into gas chromatography–mass spectrometry. Various parameters affecting the electrospinning process including monomer concentration, polyamide content, applied voltage, and electrospinning time were examined. After fabricating the most suitable preparation conditions, influential parameters on the extraction and desorption processes were optimized. The developed method proved to be rather convenient and offers sufficient sensitivity and good reproducibility. The limit of detection (S/N = 3) and limit of quantification (S/N = 10) of the method under optimized conditions were 50 and 100 ng L⁻¹, respectively. The relative standard deviation at concentration level of 1 ng mL⁻¹ was 2% (n = 3). The calibration curve of analyte showed linearity in the range of 0.1–1 ng mL⁻¹ (R ² = 0.9975). The developed method was successfully applied to tap and Zayanderood river water samples, while the relative recovery percentages of 98% and 96% were obtained, respectively. The whole procedure showed to be conveniently applicable and quite easy to be manipulated.     

Molecular ion-electron recombination in an expanding ultracold neutral plasma of NO+

Using state-selected double-resonant excitation, we create a Rydberg gas of NO molecules excited to the principal quantum number n = 50 of the f-series converging to the ion rotational level, N(+) = 2. This gas evolves to form an ultracold plasma, which expands under the thermal pressure of its electrons, and dissipates by electron-ion recombination. Under conditions chosen for this experiment, the observed rates of expansion vary with selected plasma density. Electron temperatures derived from these expansion rates vary from T(e) = 12 K for the highest density up to 16 K at four-fold lower density. Over this range, the apparent electron coupling parameter, defined as Γ(e) = e(2)/4πε(0)ak(B)T(e), falls from nearly three to about one. The decay of charged-particle density fits with a kinetic model that includes parallel paths of direct two-body and stepwise three-body dissociative recombination. The overall recombinative decay follows a second-order rate law, with an observed rate constant that fits with established scattering-theory estimates for elementary two-body dissociative recombination. A small residual increase in this rate constant with decreasing charged-particle density suggests a growing importance of the three-body recombination channel under conditions of decreasing electron correlation.     

Coherent states for the Kepler–Coulomb problem on a sphere

An algebraic approach to Kepler problem in a curved space is introduced. By using this approach, the creation and annihilation operators associated to this system and their algebra are calculated. These operators satisfy a deformed Weyl–Heisenberg algebra which can be assumed as a deformed su(2)$\mathfrak{s}\mathfrak{u}\left(2\right)$ algebra. By using this fact, the nonlinear coherent states of this system are constructed. The scalar product and Bargmann representation of this family of nonlinear coherent states are constructed. The present contribution shows that these nonlinear coherent states possess some non-classical features which strongly depend on the Kepler coupling constant and space curvature. Depending on the non-classical measures, the smaller the curvature parameter, the more the non-classical features. Moreover, the stronger Kepler constant provides more non-classical features.     

High-throughput micro-solid phase extraction on 96-well plate using dodecyl methacrylate-ethylen glycol dimethacrylate monolithic copolymer

A novel high-throughput device based on 96-micro-solid phase extraction (96-μ-SPE) system was constructed for multiresidue determination of nine pesticides in aquatic samples. The extraction procedure was performed on a commercially available 96-well plate system. The extraction module consisted of 96 pieces of 1 cm × 3 cm of cylindrically shaped stainless steel meshes. The prepared meshes were fixed in a home-made polytetrafluoroethylene-based constructed ninety-six holes block for possible simultaneous immersion of meshes into the center of individual wells. Dodecyl methacrylate and ethylene glycol dimethacrylate was copolymerized as a monolithic polymer and placed in the cylindrically shaped stainless steel meshes as extracting medium. A volume of 1 mL of the aquatic sample was transferred into the 96-well plate and the 96-μ-SPE device was applied for the extraction of the selected pesticides. Subsequently, the extracted analytes were analyzed by gas chromatography–mass spectrometry. Influential parameters such as polymer synthesis conditions, sorbent-to-sorbent reproducibility, ionic strength and extraction time were optimized. Intra and inter-sorbent reproducibility on 96-μ-SPE device were evaluated and results revealed that extraction yields are rather similar. Limits of detection were below 4 μg L⁻¹ and the coefficient of determination was satisfactory (r² > 0.99) for all the studied analytes. The developed method was successfully applied to the extraction and determination of the selected pesticides in surface water samples.     

Interspecies variation in survival and growth of filamentous heterotrophic bacteria in response to UVC radiation

Ultraviolet radiation is an important environmental constraint on the evolution of life. In addition to its harmful effects, ultraviolet radiation plays an important role in generating genetic polymorphisms and acting as a selective agent. Understanding how prokaryotes cope with high radiation can give insights on the evolution of life on Earth. Four representative filamentous bacteria from the family Cytophagaceae with different pigmentation were selected and exposed to different doses of UVC radiation (15-32,400Jm(-2)). The effect of UVC radiation on bacterial survival, growth and morphology were investigated. Results showed high survival in response to UVC for Rudanella lutea and Fibrisoma limi, whereas low survival was observed for Fibrella aestuarina and Spirosoma linguale. S. linguale showed slow growth recovery after ultraviolet exposure, R. lutea and F. limi showed intermediate growth recovery, while F. aestuarina had the fastest recovery among the four tested bacteria. In terms of survival, S. linguale was the most sensitive bacterium whereas R. lutea and F. limi were better at coping with UVC stress. The latter two resumed growth even after 2h exposure (～10,800Jm(-2)). Additionally, the ability to form multicellular filaments after exposure was tested using two bacteria: one representative of the high (R. lutea) and one of the low (F. aestuarina) survival rates. The ability to elongate filaments due to cell division was preserved but modified. In R. lutea 10min exposure reduced the average filament length. The opposite was observed in F. aestuarina, where the 5 and 10min exposures increased the average filament length. R. lutea and F. limi are potential candidates for further research into survival and resistance to ultraviolet radiation stress.     

An efficient biosurfactant-producing bacterium Pseudomonas aeruginosa MR01, isolated from oil excavation areas in south of Iran

A bacterial strain was isolated and cultured from the oil excavation areas in tropical zone in southern Iran. It was affiliated with Pseudomonas. The biochemical characteristics and partial sequenced 16S rRNA gene of isolate, MR01, was identical to those of cultured representatives of the species Pseudomonas aeruginosa. This bacterium was able to produce a type of biosurfactant with excessive foam-forming properties. Compositional analysis revealed that the extracted biosurfactant was composed of high percentages lipid (65%, w/w) and carbohydrate (30%, w/w) in addition to a minor fraction of protein (4%, w/w). The best production of 2.1 g/l was obtained when the cells were grown on minimal salt medium containing 1.2% (w/v) glucose and 0.1% (w/v) ammonium sulfate supplemented with 0.1% (w/v) isoleucine at 37 °C and 180 rpm after 2 days. The optimum biosurfactant production pH value was found to be 8.0. The MR01 could reduce surface tension to 28 mN/m and emulsified hexadecane up to E24  70. The results obtained from time course study indicated that the surface tension reduction and emulsification potential was increased in the same way to cell growth. However, maximum biosurfactant production occurred and established in the stationary growth phase (after 84 h). Fourier Transform Infrared spectrum of extracted biosurfactant indicates the presence of carboxyl, amine, hydroxyl and methoxyl functional groups. Thermogram of biosurfactant demonstrated three sharp endothermic peaks placing between 200 and 280 °C. The core holder flooding experiments demonstrated that the oil recovery efficiencies varied from 23.7% to 27.1% of residual oil.