Modification of WS2 nanosheets with beta-cyclodextrone and N-isopropylacrylamide polymers for tamoxifen adsorption and investigation of in vitro drug release

In this research, tungsten disulfide (WS₂) nanosheets were modified with beta-cyclodextrone (βCD) N-isopropylacrylamide polymers (NIPAAP) for adsorption of tamoxifen (TAM) drug. The synthesized WS₂/βCD/NIPAAP samples were characterized by field-emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and X-ray diffraction (XRD) analyses. The adsorption experiments of TAM on WS₂/βCD/NIPAAP were performed as a function of pH, reaction contact time, temperature and drug concentration. The adsorption kinetic data were well fitted to the pseudo-second-order model. Also, the equilibrium data were well described by Langmuir isotherm model. The maximum adsorption capacity of WS₂/βCD/NIPAAP for TAM drug was found to be 62.0 mg/g. The results of regeneration tests showed that the synthesized WS₂/βCD/NIPAAP adsorbent can be easily reused after 6 cycles of adsorption–desorption. Furthermore, TAM drug release was investigated in a simulated system with pH 7.4 at different temperatures. The results showed that the release of TAM drug from WS₂/βCD/NIPAAP carrier at 50 °C and 37 °C was greater than TAM release at 25 °C. Also, the experimental data of drug release were studied by Higuchi, Ritger-Peppas, zero-order and first-order models. The release data were well fitted to the zero-order model indicating a case II transport. The results showed a high stability for TAM drug.

     

Acceleration of osteogenic differentiation by sustained release of BMP2 in PLLA/graphene oxide nanofibrous scaffold

After about three decades of experience, tissue engineering has become one of the most important approaches in reconstructive medical research to treat non‐self‐healing bone injuries and lesions. Herein, nanofibrous composite scaffolds fabricated by electrospinning, which containing of poly(L‐lactic acid) (PLLA), graphene oxide (GO), and bone morphogenetic protein 2 (BMP2) for bone tissue engineering applications. After structural evaluations, adipose tissue derived mesenchymal stem cells (AT‐MSCs) were applied to monitor scaffold's biological behavior and osteoinductivity properties. All fabricated scaffolds had nanofibrous structure with interconnected pores, bead free, and well mechanical properties. But the best biological behavior including cell attachment, protein adsorption, and support cells proliferation was detected by PLLA‐GO‐BMP2 nanofibrous scaffold compared to the PLLA and PLLA‐GO. Moreover, detected ALP activity, calcium content and expression level of bone‐related gene markers in AT‐MSCs grown on PLLA‐GO‐BMP2 nanofibrous scaffold was also significantly promoted in compression with the cells grown on other scaffolds. In fact, the simultaneous presence of two factors, GO and BMP2, in the PLLA nanofibrous scaffold structure has a synergistic effect and therefore has a promising potential for tissue engineering applications in the repair of bone lesions.     

An aniline-based fiber coating for solid phase microextraction of polycyclic aromatic hydrocarbons from water followed by gas chromatography-mass spectrometry

A fiber coating from polyaniline (PANI) was electrochemically prepared and employed for solid phase microextraction (SPME) of some polycyclic aromatic hydrocarbons (PAHs) from water samples. The PANI film was directly electrodeposited on the platinum wire surface in sulfuric acid solution using cyclic voltammetry (CV) technique. The applicability of this coating was assessed employing a laboratory-made SPME device and gas chromatography with mass spectrometry (GC-MS) for the extraction of some PAHs from the headspace of aqueous samples. Application of wider potential range in CV led to a PANI with more stability against the temperature. The homogeneity and the porous surface structure of the film were examined by the scanning electron microscopy (SEM). The study revealed that this polymer is a suitable SPME fiber coating for extracting the selected PAHs. Important parameters influencing the extraction process were optimized and an extraction time of 40 min at 40 degrees C gave maximum peak area, when the aqueous sample was added with NaCl (20%, w/v). The synthesis of the PANI can be carried out conveniently and in a reproducible manner while it is rather inexpensive and stable against most of organic solvents. The film thickness of PANI can be precisely controlled by the number of CV cycles. The resulting thickness was roughly 20 microm after 20 cycles. At the optimum conditions, the relative standard deviation (RSD) for a double distilled water spiked with selected PAHs at ppb level were 8.80-16.8% (n = 3) and detection limits for the studied compounds were between 0.1-6 pg mL(-1). The performance of PANI was, also, compared with a commercial solid coated-based SPME fiber, carbowax/divinylbenzene (CW/DVB), under similar experimental conditions.     

Solvatochromic, spectroscopic and DFT studies of a novel synthesized dye: l-(4-Dimethylaminophenyl)-2-(5H-phenanthridine-6-ylidene)-ethanone (6-KMPT)

A novel solvatochromic l-(4-dimethylaminophenyl)-2-(5H-phenanthridine-6-ylidene)-ethanone (6-KMPT) dye was synthesized and characterized by means of NMR, IR, mass spectroscopies. Also, it was studied using UV-vis and fluorescence spectroscopic methods in a broad range of solvents. UV-vis results showed that increasing 6-KMPT concentration dose not cause molecular aggregation in chloroform. Varying the temperature in the range from 25 to 55 degrees C dose not have a significant effect on the characteristics bands of the molecule. However, in the presence of surfactant SDS the UV-vis spectrum undergoes drastic alteration. This phenomenon is related to the removal of hydrogen atom from nitrogen atom of phenanthridine moiety. Fluorescence spectroscopic results showed that 6-KMPT has an appreciable fluorescence quantum yield. The effect of excitation wavelength, concentration of 6-KMPT, concentration of oxygen and surfactants (SDS, C(16)TAB, CPC, Brij-35) were studied. Further results showed that the fluorescent behavior of 6-KMPT can be attributed to planarity induced by intramolecular hydrogen bonding which can in turn be destroyed by anionic surfactant SDS. Results showed that oxygen and SDS can be operate as fluorescence quencher compounds for 6-KMPT and Stern-Volmer plot showed a straight line. Fluorescence polarization and anisotropy of 6-KMPT in chloroform strongly depend on concentration. The 6-KMPT exhibits solvent-induced spectral band shifts. By using Lippert equation, the change of dipole moment of 6-KMPT molecule upon excitation was estimated as 6.39 D. Furthermore, absorption, fluorescence emission, Stokes shift values and fluorescence quantum yield (Phi(F)) of 6-KMPT in different solvents of polarity were determined. Maximum Phi(F) value of 0.372 for 6-KMPT molecule was found in ethanol solvent with a Stokes shift of 2446.8 cm(-1). The results of DFT calculations showed that tautomer 2c (enol) energetically is more stable than tautomer 2b (keto) in gas phase whereas it was vice versa in CHCl(3).     

Electrospun composite of polypyrrole-polyamide as a micro-solid phase extraction sorbent

A micro-solid phase extraction technique was developed using a novel polypyrrole-polyamide nanofiber sheet, fabricated by electrospinning method. The applicability of the new nanofiber sheet was examined as an extracting medium to isolate malathion as a model pesticide from aqueous samples. Solvent desorption was subsequently performed in a microvial, and an aliquot of extractant was injected into gas chromatography–mass spectrometry. Various parameters affecting the electrospinning process including monomer concentration, polyamide content, applied voltage, and electrospinning time were examined. After fabricating the most suitable preparation conditions, influential parameters on the extraction and desorption processes were optimized. The developed method proved to be rather convenient and offers sufficient sensitivity and good reproducibility. The limit of detection (S/N = 3) and limit of quantification (S/N = 10) of the method under optimized conditions were 50 and 100 ng L⁻¹, respectively. The relative standard deviation at concentration level of 1 ng mL⁻¹ was 2% (n = 3). The calibration curve of analyte showed linearity in the range of 0.1–1 ng mL⁻¹ (R ² = 0.9975). The developed method was successfully applied to tap and Zayanderood river water samples, while the relative recovery percentages of 98% and 96% were obtained, respectively. The whole procedure showed to be conveniently applicable and quite easy to be manipulated.     

Novel unbreakable solid-phase microextraction fiber by electrodeposition of silica sol-gel on gold

A new technique for preparation of an unbreakable solid-phase microextraction (SPME) fiber, using sol-gel technology is developed. Primarily, an ultrathin two-dimensional intermediate film was prepared by hydrolysis of 3-(trimethoxysilyl)-1-propanthiol self-assembled monolayer grafted onto gold, then a stationary phase by electrodeposition of 3-(trimethoxysilyl)propylmethacrylate as a precursor, tetramethyl orthosilicate and polyethylene glycol as a coating polymer was produced. The scanning electron microscopy images revealed that the new fiber exhibits a rather porous and homogenous surface. The thermal stability of the fabricated fiber was investigated by thermogravimetric analysis. The applicability of the prepared fiber coating in conjunction with gas chromatography-mass spectrometry was examined by SPME of polycyclic aromatic hydrocarbons, as model analytes, from aquatic media. An extraction time of 20 min at 50 °C gave maximum peak areas when NaCl, 15% was added to the aqueous samples. Limits of detection were in the range of 0.01-0.02 ng/mL and relative standard deviation values were in the range of 4-16% at 1 ng/mL. The developed method was successfully applied for the analysis of real water samples while the relative recovery percentage was in the range of 102-118%.     

Tractor cabin’s passive suspension parameters optimization via experimental and numerical methods

Reduction of transmitted vibrations of tractor cabin which is caused by road roughness is the major objective of this study; consequently operator health can be achieved. This objective is carried out via experimental measurements and finite element modeling. For this purpose the vertical acceleration of the cabin as well as the rear axle of the tractor is measured in different road conditions and forward speeds. However, it should be mentioned that tests were carried out according to the ISO 2631-1985 but no measurements were done on the driver’s seat. Then the finite element model of the cabin’s tractor is developed and the dynamic response of the cabin interior (with the measured axle acceleration as input dynamic force) is obtained. At the third step the suspension parameters are calculated by comparing the accelerations obtained from the model and measurements. Finally the suspension parameters are optimized according to ISO 2631-1985 via iterative method.     

Self-sustained global oscillations in a jet in crossflow

A jet in crossflow with an inflow ratio of 3, based on the maximum velocity of the parabolic jet profile, is studied numerically. The jet is modeled as an inhomogeneous boundary condition at the crossflow wall. We find two fundamental frequencies, pertaining to self-sustained oscillations in the flow, using full nonlinear direct numerical simulation (DNS) as well as a modal decomposition into global linear eigenmodes and proper orthogonal decomposition (POD) modes; a high frequency which is characteristic for the shear-layer vortices and the upright vortices in the jet wake, and a low frequency which is dominant in the region downstream of the jet orifice. Both frequencies can be related to a region of reversed flow downstream of the jet orifice. This region is observed to oscillate predominantly in the wall-normal direction with the high frequency, and in the spanwise direction with the low frequency. Moreover, the steady-state solution of the governing Navier?CStokes equations clearly shows the horseshoe vortices and the corresponding wall vortices further downstream, and the emergence of a distinct counter-rotating vortex pair high in the free stream. It is thus found that neither the inclusion of the jet pipe nor unsteadiness is necessary to generate the characteristic counter-rotating vortex pair.     

Molecular ion-electron recombination in an expanding ultracold neutral plasma of NO+

Using state-selected double-resonant excitation, we create a Rydberg gas of NO molecules excited to the principal quantum number n = 50 of the f-series converging to the ion rotational level, N(+) = 2. This gas evolves to form an ultracold plasma, which expands under the thermal pressure of its electrons, and dissipates by electron-ion recombination. Under conditions chosen for this experiment, the observed rates of expansion vary with selected plasma density. Electron temperatures derived from these expansion rates vary from T(e) = 12 K for the highest density up to 16 K at four-fold lower density. Over this range, the apparent electron coupling parameter, defined as Γ(e) = e(2)/4πε(0)ak(B)T(e), falls from nearly three to about one. The decay of charged-particle density fits with a kinetic model that includes parallel paths of direct two-body and stepwise three-body dissociative recombination. The overall recombinative decay follows a second-order rate law, with an observed rate constant that fits with established scattering-theory estimates for elementary two-body dissociative recombination. A small residual increase in this rate constant with decreasing charged-particle density suggests a growing importance of the three-body recombination channel under conditions of decreasing electron correlation.     

Nuclear data for the cyclotron production of 117Sb and 90Nb

This presented study is to make comparison of cross sections to produce 117Sb and 90Nb via different reactions with particle incident energy up to 70 MeV as a part of systematic studies on particle-induced activations on enriched Sn, Y2O3 and ZrO2 targets, theoretical calculation of production yield, calculation of required thickness of target and suggestion of optimum reaction to produce Antimony-117 and Niobium-90.