1.5-Diaza-3.7-diphospha-cyclooctane

The alkyl (aryl)-bishydroxymethylphosphines react with primary amines to give the title compounds. With optically active amines optically active phosphines are formed.     

pH-sensitive modulation of the second hydration sphere in lanthanide(III) tetraamide-DOTA complexes: a novel approach to smart MR contrast media

The lanthanide(III) complexes of three tetraamide DOTA bearing pyridyl, phenolic and hydroxypyridyl substituents have been studied by NMR, luminescence and cyclic voltammetry. The relaxivity profiles of the gadolinium complexes of the pyridyl and phenolic ligands were flat and essentially the same between pH 2 and 8. The hydroxypyridyl ligand, however, exhibited two regions of enhanced relaxivity. The small relaxivity enhancement (25 %) at lower pH (pH 2-4) has been attributed to an increase in the prototropic exchange of the coordinated water molecule while the slightly larger enhancement (84 %) at higher pH (pH 6-9) reflects deprotonation of the ligand amide protons. Deprotonation of the amides results in the formation of an intramolecular acid-base pair interaction with the phenolic protons and this, in turn, causes a highly organized second hydration sphere to come into effect, thereby increasing the relaxivity. The water relaxivity of the Gd(3+)-hydroxypyridyl complex is further enhanced upon binding to serum albumin.     

The Remarkable Structure of Lithium Cyanide/Isocyanide

Electron correlation corrections have a considerable influence on the relative stabilities of lithium isocyanide ( 1 ), lithium cyanide ( 2 ), and the bridged form, 3 . While Hartree-Fock theory finds 1 to be most stable and 3 not to be a minimum, MP2/6-31G* optimization indicates 3 to be the global minimum. At higher levels employing full fourth-order Møller-Plesset theory and a quadruply split valence and polarized basis set (MP4STDQ/6-311+G*), 2 is only about 2 kcal/mol less stable than 1 and 3 , which are indicated to have nearly the same energy. LiNC thus is similar to C(Na)N and C(K)N, both of which are known to prefer T-shaped (bridged) structures in the gas phase. However, to an even greater extent than formerly realized, rotation of the lithium cation around the cyanide anion nucleus should be practically free. ΔH (LiCN) = 32.8 kcal/mol is estimated from the calculated lithium cation affinity of 151.2 kcal/mol. In addition, we find at the MP4SDTQ/6-31+G*//MP2/6-31G* level that the bridged form of NaCN is favored by 2–3 kcal/mol over the corresponding linear forms, which have nearly the same energy.     

Optisch aktive β(alkoxy)ethyl-phosphonsäureester, β(alkoxy)ethyl-phenyl-phosphinsäureester, β(alkoxy)ethyl-diphenylphosphinoxide und β(alkoxy)ethyl-diphenylphosphine

The title compounds are synthesized by Michael-type additions of optically active alcohols to the corresponding PO-activated vinylderivatives.     

Application of significant structures theory to amorphous polyethylene

The thermodynamic properties of amorphous polyethylene are calculated from a model based on the method of significant structures. The motion of a molecule as a whole is described by the motion of segments, each segment moving independently of all others. It is assumed that on melting, holes appear in the solid lattice and the segments can move into these vacancies, obtaining some gaslike degrees of freedom. The complete frequency distribution for polyethylene is used for the solidlike degrees of freedom, while a corrected classical partition function is used for the gaslike degrees of freedom. The calculated thermodynamic properties are in reasonable agreement with experimentally determined values, assuming each gaslike segment to consist of 20 CH₂ groups.     

Zur Synthese sulfonierter Derivate von 2,3-Dimethylanilin und 3,4-Dimethylanilin

On the Synthesis of Sulfonated Derivatives of 2,3-Dimethylaniline and 3,4-Dimethylaniline Baking the hydrogensulfate salt of 2,3-dimethylaniline ( 1 ) or of 3,4-dimethylaniline ( 2 ) led to 4-amino-2,3-dimethylbenzenesulfonic acid ( 4 ) and 2-amino-4,5-dimethylbenzenesulfonic acid ( 5 ), respectively (Scheme 1). The sulfonic acid 5 was also obtained by treatment of 2 with sulfuric acid or by reaction of 2 with amidosulfuric acid. 3-Amino-4,5-dimethylbenzenesulfonic acid ( 3 ) and 5-Amino-2,3-dimethylbenzenesulfonic acid ( 6 ) were prepared by sulfonation of 1,2-dimethyl-3-nitrobenzene ( 9 ) to 3,4-dimethyl-5-nitrobenzenesulfonic acid ( 11 ) and of 1,2-dimethyl-4-nitrobenzene ( 10 ) to 2,3-dimethyl-5-nitrobenzenesulfonic acid ( 12 ), respectively, with subsequent Béchamp reduction (Scheme 1). Preparations of 2-amino-3,4-dimethylbenzenesulfonic acid ( 7 ) and of 6-amino-2,3-dimethylbenzenesulfonic acid ( 8 ) were achieved by the sulfur dioxide treatment of the diazonium chlorides derived from 3,4-dimethyl-2-nitroaniline ( 24 ) and from 2,3-dimethyl-6-nitroaniline ( 31 ) to 3,4-dimethyl-2-nitrobenzenesulfonyl chloride ( 29 ) and 2,3-dimethyl-6-nitrobenzenesulfonyl chloride ( 32 ), respectively, followed by hydrolysis to 3,4-dimethyl-2-nitrobenzenesulfonic acid ( 30 ) and 2,3-dimethyl-6-nitrobenzenesulfonic acid ( 33 ), and final reduction (Scheme 3). Compound 7 was also synthesized by reaction of 4-chloro-2,3-dimethylaniline ( 23 ) with amidosulfuric acid to 2-amino-5-chloro-3,4-dimethylbenzenesulfonic acid ( 20 ) and subsequent hydrogenolysis (Scheme 2). 4′-Bromo-2′, 3′-dimethyl-acetanilide ( 13 ) and 4′-chloro-2′, 3′-dimethyl-acetanilide ( 14 ) on treatment with oleum yielded 5-acetylamino-2-bromo-3,4-dimethylbenzenesulfonic acid ( 17 ) and 5-acetylamino-2-chloro-3,4-dimethylbenzenesulfonic acid ( 18 ), respectively. Their structures were proven by hydrolysis to 5-amino-2-bromo-3,4-dimethylbenzenesulfonic acid ( 21 ) and 5-amino-2-chloro-3,4-dimethylbenzenesulfonic acid ( 22 ), followed by reductive dehalogenation to 3 .     

Does CH prefer a C2v rather than a Cs structure?

The closely related C_s ( 1 ) and C_2v ( 3 ) structures of CH have been reinvestigated at many ab initio levels using MP2/6-31G** and MP2/6-311 + + G(2df, 2pd) geometries. The largest basis sets employed were 6-311G(3df, 2p), 6-311 + + G(3df, 3pd), and the Dunning “correlation consistent” polarized triple-split valence basis set (cc-pVTZ). Electron correlation was probed at the MP4 level, but the QCISD method was also used with the largest basis sets. While electron correlation favors 3 over 1 by about 2 kcal/mol, the correlated relative energies with all basis sets employed range from 0.36–1.03 kcal/mol in favor of 1 . The best estimate of this difference, 0.86 kcal/mol, is essentially identical with the (scaled) zero-point energy difference, 0.84 kcal/mol, favoring 3 over 1 . These results indicate that 1 and 3 have almost exactly the same energy at 0 K. Our best value for the dissociation energy of CH is 42.0 kcal/mol [QCISD(T)/6-311 + + G(3df, 3pd)//MP2(fu)/6-311 + + G(2df, 2pd), corrected to 298 K], which agrees very well with the experimental value. © 1992 by John Wiley & Sons, Inc.     

Dimetallic Complexes with Bridging Seven-membered Cycloolefins. Synthesis,Multinuclear NMR.-Spectroscopic Properties and Structure

The synthesis of dimetallic olefin complexes of the type L¹M¹C₇H₇M²L² (M¹ = Fe, Co, Rh; M² = Rh, Ir, Pd; L¹ = CO, C₅H₅; L² = diene, allyl, P(OR)₃) is described. The fluxional structures were investigated by ¹³C-, ⁵⁷Fe- and ¹⁰³Rh-NMR.-spectroscopy, and a cisoid dimetallic coordination, including a (metal, metal)-bond, can be deduced for the C₇H₇-ring. ⁵⁷Fe- and ¹⁰³Rh-chemical shifts give indications for the charge distribution in the 34e-complexes. The homodimetallic complex (Cp)Rh(tropone)Rh(Cp) ( 13 , Cp = cyclopentadienyl) and the corresponding 2-methoxytropone complex 14 were synthesized in addition to the above mentioned complexes. A fluxional bis(1-3-η-allyl)-coordination of the two Rh-atoms was derived from the temperature-dependent ¹³C-NMR.-spectra. A spin simulation of the (Cp)-multiplets of 12 and 13 yields information about (Rh, Rh)-spin-coupling which amounts to ≈5 Hz at 30°.     

Zur Synthese sulfonierter Derivate von 4-Amino-1,3-dimethylbenzol und 2-Amino-1,3-dimethylbenzol

Syntheses of Sulfonated Derivatives of 4-Amino-1, 3-dimethylbenzene and 2-Amino-1, 3-dimethylbenzene Direct sulfonation of 4-amino-1, 3-dimethylbenzene (1) and sulfonation of 4-nitro-1,3-dimethylbenzene ( 4 ) to 4-nitro-1,3-dimethylbenzene-6-sulfonic acid ( 3 ) followed by reduction yield 4-amino-1,3-dimethylbenzene-6-sulfonic acid ( 2 ). The isomeric 5-sulfonic acid ( 5 ) however is prepared solely by baking the acid sulfate salt of 1 . Reaction of sulfur dioxide with the diazonium chloride derived from 2-amino-4-nitro-1,3-dimethylbenzene ( 7 ) leads to 4-nitro-1,3-dimethylbenzene-2-sulfonyl chloride ( 8 ), which is successively hydrolyzed to 4-nitro-1,3-dimethylbenzene-2-sulfonic acid ( 9 ) and reduced to 4-amino-1, 3-dimethylbenzene-2-sulfonic acid ( 6 ). Treatment of 4-amino-6-bromo-1,3-dimethylbenzene ( 12 ) and 4-amino-6-chloro-1, 3-dimethylbenzene ( 13 ), the former obtained by reduction of 4-chloro-6-nitro-1,3-dimethyl-benzene ( 10 ) and the latter from 4-chloro-6-nitro-1, 3-dimethylbenzene ( 11 ), with oleum yield 4-amino-6-bromo-1,3-dimethylbenzene-2-sulfonic acid ( 14 ) and 4-amino-6-chloro-1,3-dimethylbenzene-2-sulfonic acid ( 15 ) respectively; subsequent carbon-halogen hydrogenolyses of 14 and 15 lead also to 6 (Scheme 1). Baking the acid sulfate salt of 2-amino-1, 3-dimethylbenzene ( 17 ) gives 2-amino-1, 3-dimethylbenzene-5-sulfonic acid ( 16 ), whereas the isomeric 4-sulfonic acid ( 18 ) can be prepared by either of the following three possible pathways: Sulfonation of 2-nitro-1,3-dimethylbenzene ( 20 ) to 2-nitro-1,3-dimethylbenzene-4-sulfonic acid ( 21 ) followed by reduction or sulfonation of 2-acetylamino-1,3-dimethylbenzene ( 19 ) to 2-acetylamino-1,3-dimethylbenzene-4-sulfonic acid ( 22 ) with subsequent hydrolysis or direct sulfonation of 17 . Further sulfonation of 18 yields 2-amino 1,3-dimethylbenzene-4,6-disulfonic acid ( 23 ), the structure of which is independently confirmed by reduction of unequivocally prepared 2-nitro- 1,:3-dimethylbenzene-4,6-disulfonic acid ( 24 )(Scheme 2).     

Cyclopeptid-Antibiotika aus Aspergillus-Arten. Struktur der Echinocandine C und D

Cyclopeptide antibiotics from Aspergillus species. Structure of echinocandins C and D The echinocandins B, C and D are antifungal antibiotics produced by a strain of Aspergillus rugulosus. All three metabolites are closely related representing cyclic oligopeptides composed of six amino acids and a linolic acid residue in an amide linkage. The complete structure of echinocandin B ( 1 ) has recently been established by X-ray analysis. Structural assignments to the new minor metabolites C and D have now been made by hydrolytic and oxidative cleavage reactions, formation of N-acyl-α-aminoethers as well as by chemical correlations and extensive NMR. examinations. Echinocandin C ( 2 ), C₅₂H₈₁N₇O₁₅, contains 3-hydroxyhomotyrosine in the place of 3, 4-dihydroxyhomotyrosine present in 1 . Echinocandin D ( 3 ), C₅₂H₈₁N₇O₁₃, differs in two amino acids: 3, 4-dihyroxyhomotyrosine and 4, 5-dihydroxyornithine, unusual units of 1 being replaced by 3-hydroxyhomotyrosine and ornithine.